Providing play Materials at Rama garden parkin Ward no 50 East Zone.

Amount

Cleaning the light jungle etc completed as per direction of officers

Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.

Supplying and fixing of design grill main gate including cost and conveyance of all labour and material charges ..etc. complete

Plastering in Cement Mortar 1:5 mix 12mm thick etc., complete.

Painting TWO COATS over the Base coat with best and approved quality of EMULSION PAINT over the plaster surface including cost of paint and other materials, brushes,scaffolding charges etc,m, complete complying with standard specifications

Painting with enamel paint two coats for new iron works over a base coat etc complete

Supplying and Laying Rubber Moulded Hydraulic Pressed Paver Block Providing and laying of 83 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

S/fixing of swing two seater with bit of 8'-0" above GL using 50mm dia ms pipe 9swg with 3.65mm on wall thick with one coat of primer and to coats of enamel paint and seat using with paddale wood with polishing

S/fixing of slide ladder park model using 16g MS sheet for sliding 8'-0" support pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick ladder using 25mm L angle for sliding support hand rails using 25mm sq.rod and platform frame using 40mm L angle with one coat of primer and two coat of enamel paintinf etc

S/fixing of jungle jim pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick running three horizontally and vertically on each side finishing one coat of primer and two coat of enamel paint of approved colour aa per instruction of departmental officers

S/F of twin sea saw two seater of 6'-0" length and 4'-0" height using 50mm G.I. pipe with two coats of enamel paint over one coat of primer and platform using 1" paddale wood with polish as per direction of departmental officers.

Supply and fixing of merry-Go-Round using M.S pipe of 50 dia and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250 mm. The merry go round of 6 seat approved by the Executive engineer before use on work.

Supply and fixing of Park benches including moulding charges etc complete

Add :- GST @ 18%

CHITHRAVARSINI AND CO (BID ID -1254967)