Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.8 LAccepted-AOC | ₹57.8 L Quoted ₹58.0 L | L1 | Accepted-AOC L1 BIDDER |
| 2 | L2₹67.5 LRejected-Finance RATNA RAJ BUILDING 1ST FLOOR 262 BIDHAN ROAD OPP TERA HOTEL WEST BENGAL | MEDINIPUR WEST | WEST BENGAL | 712122 | ₹67.5 L | L2 | Rejected-Finance OTHER THAN L1 |
| 3 | L3₹69.2 LRejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG 793009 MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | ₹69.2 L | L3 | Rejected-Finance OTHER THAN L1 |
| 4 | L4₹69.6 LRejected-Finance BEHIND CENTRAL BANK OF INDIA PO KADAMTALA DIST DARJEELING PIN 734011 WB | DARJEELING | WEST BENGAL | 734011 | ₹69.6 L | L4 | Rejected-Finance OTHER THAN L1 |
| 5 | L5₹70.2 LRejected-Finance 14 NATIONAL COMMERCE HOUSE BUILDING CHURCH ROAD SILIGURI DAJEELING WEST BENGAL 734001 | DARJEELING | WEST BENGAL | 734001 | ₹70.2 L | L5 | Rejected-Finance OTHER THAN L1 |
| Sl No | Description | Qty | Unit | M/S JANATA CONSTRUCTION L4 | ENGINEERING AND CONSTRUCTION CO. L2 | HARBHAJDAS AGARWAL L6 | KAMALA INDUSTRIES L5 | S K ENTERPRISE L3 | M/S SEN CONSTRUCTION L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Preparation of surface by Scarifying or picking of existing WBM/gravelled macadam or bituminous macadam surface area exc 400 sqm and depth exc 50 mm but n exc 100mm including removing of debris etc from site to a distance n.exc 50 metres, complete all as specified and directed. | 30 | 10 Sqm | 298 ₹8,940 | 250 ₹7,500 | 398 ₹11,940 | 350 ₹10,500 | 310 ₹9,300 | 380 ₹11,400 |
| 2.00 | M&L for laying 75mm thick (compacted thickness) WBM with coarse aggregate of grading 2 (63 to 40 mm size) (lime stone, sand stone, flint or Quartzite), spread, rolled with power roller 8 to12 tonnes & consolidated to gradient/camber required etc, complete all as specified and directed. | 30 | 10 Sqm | 3,110 ₹93,300 | 2,960 ₹88,800 | 3,189 ₹95,670 | 3,560 ₹1.1 L | 3,540 ₹1.1 L | 3,250 ₹97,500 |
| 3.00 | M&L for preparation of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc., sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming /tack coat with cationic bitumen emulsion SS-1 confirming to IS 8887 @ 0.70-1.00 kg/sqm on surface of WBM as specified in table 500-5 of MoRTH specification for road and bridge work 2013, using mechanical sprayer complete all as specified and directed. | 30 | 10 Sqm | 754 ₹22,620 | 742 ₹22,260 | 788 ₹23,640 | 780 ₹23,400 | 730 ₹21,900 | 780 ₹23,400 |
| 4.00 | M&L for premix bituminous macadam with 4% binder content (paving bitumen of grade VG-30) by weight of total mix prepared in hot mix plant, laying of mix with self propelled sensor based mechanical paver, duly rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and vibrating roller (consolidated thickness 75mm or less) etc, complete all as specified and directed.
Notes:- The contractor's quoted rates shall also be deemed to include the following elements:
(i) The contractor shall get the mix design done through Govt. approved Lab/ NABL approved Lab and the same shall be got approved from the GE before providing Bituminous Macadum.
(ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs 55 per Kg. | 87 | Cum | 9,800 ₹8.5 L | 8,769 ₹7.6 L | 9,250 ₹8.0 L | 9,250 ₹8.0 L | 8,360 ₹7.3 L | 5,000 ₹4.3 L |
| 5.00 | M&L for Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content (paving bitumen of VG-30 grade) by weight of total mix prepared in hot mix plant, laying of mix with self propelled sensor based mechanical paver, the surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and tandem vibrating roller etc complete all as specified and directed.
Notes:- The contractor's quoted rates shall also be deemed to include the following elements:
(i) The contractor shall get the mix design done through Govt. approved Lab/ NABL approved Lab and the same shall be got approved from the GE before providing SDAC.
(ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.55 per Kg .
(iii) The thickeness of SDAC indicated above is the minimum thickness, Further, it is clarified that no payment for the addl. thickness in case required to be provided to achieve the desired levels, slope & making good the undulations etc, all as directed by the GE, shall be made. | 30 | 10 Sqm | 4,130 ₹1.2 L | 4,296 ₹1.3 L | 4,425 ₹1.3 L | 4,450 ₹1.3 L | 4,525 ₹1.4 L | 4,450 ₹1.3 L |
| 6.00 | M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming /tack coat with cationic bitumen emulsion RS-1 confirming to IS 8887 @ 0.20-0.30 kg/sqm on bituminous surface as specified in Table 500-5 of MORTH specification for road and bridge work 2013, using mechanical spraye, complete all as specified and directed. | 1,095 | 10 Sqm | 547 ₹6.0 L | 614 ₹6.7 L | 650 ₹7.1 L | 650 ₹7.1 L | 630 ₹6.9 L | 450 ₹4.9 L |
| 7.00 | M&L for Bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen of VG-30 grade) by weight of total mix prepared in hot mix plant, laying of mix with self propelled sensor based mechanical paver, the surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and tandem vibrating roller etc complete all as specified and directed.
Notes:- The contractor's quoted rates shall also be deemed to include the following elements:
(i) The contractor shall get the mix design done through Govt. approved Lab/ NABL approved Lab and the same shall be got approved from the GE before providing SDAC.
(ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.55 per Kg .
(iii) The thickeness of SDAC indicated above is the minimum thickness, Further, it is clarified that no payment for the addl. thickness in case required to be provided to achieve the desired levels, slope & making good the undulations etc, all as directed by the GE, shall be made. | 1,095 | 10 Sqm | 3,890 ₹42.6 L | 3,749 ₹41.1 L | 4,010 ₹43.9 L | 3,850 ₹42.2 L | 3,896 ₹42.7 L | 3,600 ₹39.4 L |
| 8.00 | M & L for thermoplastic road marking paint, white or golden yellow @ 5kg/Sqm, conforming to BS-3262 applied on road/pavement as in lines, dashes, arrows, letters etc, exc 10 cm in width & of thickness not less than 2mm, with and including combination of retro-reflective glass beads 300 gm/ Sqm all as per manufacturer's instructions, using special applicator machine etc, complete all as specified & directed. | 451 | Sqm | 800 ₹3.6 L | 764 ₹3.4 L | 777 ₹3.5 L | 800 ₹3.6 L | 816 ₹3.7 L | 400 ₹1.8 L |
| 9.00 | M&L for repairs to pot holes, any depth, not exc 1.0 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to atleast 25 mm in depth, making good by applying tack coat of cationic bitumen emulsion RS-1 confirming to IS 8887 @ 0.20-0.30 kg/sqm , putting in premixed asphaltic semi dense concrete minimum 25 mm consolidated thickness with 5.5% of binder content of paving bitumen VG - 30 grade by weight of total mix (premixed material prepared in hot mixed plant), pre- mixed material laid with self propelled mechanical paver, finished inlcuding rolling and compacting the surfaces to required gradient and camber with 8 to 12 tonne power roller and tandom vibrating roller etc, complete all as specified and as directed.
Notes : (a) Rate quoted shall also be deemed to include for making good of any undulation/damages in wearing surfaces, where semi dense asphaltic concrete to be laid.
(b) The binder content for the semi dense ashphaltic bituminous concrete to be provided under the above item shall be worked out on proportionate basis of the design mix formula approved for the SDAC item here-in-before and binder content shall be provided accordingly, contractor shall quote his rates considering the bitumen contents as 5.5%. Any variation in binder content shall be adjusted at the rate of Rs 55.00 per Kilogram of binder.. | 2 | 10 Sqm | 2,100 ₹4,200 | 1,598 ₹3,196 | 2,350 ₹4,700 | 1,980 ₹3,960 | 2,130 ₹4,260 | 2,000 ₹4,000 |
| 10.00 | S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, etc. complete all as specified and directed. | 530 | Each | 598 ₹3.2 L | 570 ₹3.0 L | 596 ₹3.2 L | 560 ₹3.0 L | 540 ₹2.9 L | 580 ₹3.1 L |
Tender Value
₹69.8 L
EMD Value
₹1.3 L
Closing Date
14 Jan 2026, 6:00 pmClosed
CWE Bengdubi
Headquarters Commander Works Engineer Bengdubi Post-Bengdubi Distt-Darjeeling (WB) PIN- 734424
REPAIR TO INTERNAL ROAD AT DEPOT AT AREA UNDER AGE BR I UNDER GE BENGDUBI
2025_MES_744915_1
8330/B/E8
Open Tender
Civil Works
90 days
Bengdubi
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE Bengdubi
₹1.3 L
HQ CWE Bengdubi
25 Mar 2026
17 Dec 2025
16 Jan 2026
17 Dec 2025
14 Jan 2026
8 Jan 2026
26 Dec 2025
Preparation of surface by Scarifying or picking of existing WBM/gravelled macadam or bituminous macadam surface area exc 400 sqm and depth exc 50 mm but n exc 100mm including removing of debris etc from site to a distance n.exc 50 metres, complete all as specified and directed.
M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming /tack coat with cationic bitumen emulsion RS-1 confirming to IS 8887 @ 0.20-0.30 kg/sqm on bituminous surface as specified in Table 500-5 of MORTH specification for road and bridge work 2013, using mechanical spraye, complete all as specified and directed.
M & L for thermoplastic road marking paint, white or golden yellow @ 5kg/Sqm, conforming to BS-3262 applied on road/pavement as in lines, dashes, arrows, letters etc, exc 10 cm in width & of thickness not less than 2mm, with and including combination of retro-reflective glass beads 300 gm/ Sqm all as per manufacturer's instructions, using special applicator machine etc, complete all as specified & directed.
S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, etc. complete all as specified and directed.
S&F in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x125mm x25mm (shank 65mm) of high efficiency Mono Crystaline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18000 mcd complete as per manufacturers instructions etc. Complete all as specified and directed.
(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 14870.00 (refer Tender Srl Page No 20). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
Tender30.pdf
Tender Documents • 0.98 MB
BOQ_834075.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid