Providing Interior Design Arrangments to SITE-B Buildings In Development of Vallalar International Centre (VIC) at Thiru Arutprakasa Vallalar Deiva Nilayam, Vadalur, Kurinjipadi Taluk, Cuddalore District

Amount

Painting the wall with Texture Finish Paint including labour charges etc.,complete complying with standard specifications and as directed by the departmental officers.

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes etc.,complete complying with standard specifications and as directed by the departmental officers.

Tamil letters

English letters

Tensile Structure Item No. 1. Steel Structire : The Structure shall be designed in accordance with I.S. 800 with the design wind speed asdefined by IS: 875 based on ocation and site conditions and load combinations as defined by IS 875. Item No. 2:- Tensile Membrane fabric The Membrane should be minium of Ferrari 900 gsm Tensile Membrane fabric.The abobe fabric will be patterned, welded with the high frequency weldingmachine, end pockets to accommodate kedar profile and will be fixed using special aluminium exrusions to suit the structure. The complete structure will be designed for the wind load, live loads etc.

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Combination Mortor1:1:4 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Combination Mortor1:1:4and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram

Manufacturing, supplying and fixing of Teakwood ornamental Entrance door of size 1.20x2.10m with the following specification. The outer frame of ornamental Entrance Door of size 150x100mm Teak wood scantling. The door consists of openable area 1.06x2.03m with single leaf. The each openable shutter consists of Top Panel for 1.10m height and bottom vertical panel for a height of 1.00m. The Shutter bottom rail is of 200x50mm size and middle, top and side rails are of size 150x50mm with corner designed beading works. The shutter pannel is of 50mm thick T.W.planks with special curving works. The outer frames corners are designed border works single side for entrance outer frame and on both sides for middle frame. The cost includes all kinds of furniture fittings, such as special type heavy Brass Aldrop 300x20mm 1 No, special type heavy Brass tower bolt 300mm length 1 No and 200mm length 1 no, special type heavy brass hinges 200mm length 4Nos, special type door stopper 1 No, special type Ornamental door handles 2 Nos, Door bush and Door stopper etc., All the members are finshed with two coats of melamine polish outer the priming coat complete and as directed by the departmental engineers.

Supply and Fixing UN PLASTICIZED NON - PRESSURE POLYVINYL CHLORIDE (PVC-U) PIPES FOR USE IN UNDERGROUND DRAINAGE AND SEWERAGE SYSTEMS as per IS 15328/2003 etc.,complete complying with standard specifications and as directed by the departmental officers.

Drilling of borewells any wherein Cuddalore District including transportation from one place to another within the above district in Alluvial soil Sedimentary strata of clay and sand stone, shale, pebbles, boulders etc. by first taking a pilot of 140mm / 150mm / 200mm dia and the enlarging to required dia by direct or reverse rotary mud circulation method, using contractor's rotary rig, fuel, labour and drilling bentonite mud and water required for drilling at the site (shown by the TWAD Board Officers) including construction of mud pit and as directed by departmental officers.

Upto 60 mt.Depth ending below Ground Level

From 60mt.and upto 90mt.Depth ending from Ground Level

From 90mt.and upto 120mt.Depth ending from Ground Level

From 120mt.and upto 150mt.Depth ending from Ground Level

From 150mt.and upto 180mt.Depth ending from Ground Level

Reaming from 150mm.dia pilot bore to 300mm.dia bore as directed by the TWAD Board Officers.

Upto 60 mt.Depth ending below Ground Level

From 60mt.and upto 90mt.Depth ending from Ground Level

From 90mt.and upto 120mt.Depth ending from Ground Level

From 120mt.and upto 150mt.Depth ending from Ground Level

From 150mt.and upto 180mt.Depth ending from Ground Level

Labour charges for inserting PVC Deep casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with Cement paste etc. complete supplying and packing the annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD Board.

200mm dia PVC CM casing pipes.

Supply and delivery of 200mm dia PVC Deep casing pipes ( pipes and screen pipes) and specials confirming to IS amended from time to time etc. complete.

200 mm PVC CM Casing plain pipe

200mm PVC RS Casing slotted pipe

Charges for developing the borewells with Air compressor of 600 cfm. capacity (Minimum 8 hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by 'V' Natch methods.

Supply and delivery of bore cap using MS flat of size 1 cm x 3mm and MS sheet on top with bolting arrangements for securing the cap in position etc complete and as directed by departmental officers.

200mm dia bore cap

200mm dia end cap (Dummy)

Supply & Delivery of 10 HP Submerssible pump set 100 LPM X 175

3 Phase 10 HP Panel Board with star Delta and two level guard (including TNVAT 5%)

4 sq.mm 3 core submerssible cable

63mm OD HDPE HOSE-10ksc

50mm dia SS nipple

50mm dia MS clamp sets

50mm dia GI flange

7/18 PVC copper wire

7/20 GI wire

100A fuse unit

Earthing set with GI pipe, GI wire, Bolt and Nut

Labour charges for errection of submersible pump set including cable jointing fixing of starter, fuse unit and all other accessories etc., complete Up to 10 HP

Sub total

MSR CONSTRUCTION (BID ID -1553692)