Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.4 LAccepted-AOC | ₹27.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹28.7 L+₹1.3 L (4.79%)Rejected-Finance | ₹28.7 L+₹1.3 L (4.79%) | L2 | Rejected-Finance L2 |
| 3 | L3₹33.0 L+₹5.5 L (20.2%)Rejected-Finance | ₹33.0 L+₹5.5 L (20.2%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Mohinder Kumar Gupta L2 | M/S Sidharth Bore Well L1 | Rajinder Kumar Thakur L3 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck / tractor mounted where road available or with portable rigs where road not available with DTH / ODEX / Percussion / Calyx / Rotary alongwith necessary accessories etc. to the site of work and erection including levelling of site etc. complete in all respects as per directions of Engineer - in - Charge. | 5 | Nos. | 6,500 ₹32,500 | 6,300 ₹31,500 Lowest | 11,000 ₹55,000 |
| 2.00 | Drilling bores of 152 mm dia. as per IS: 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable stores, bits, water,POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25 mm dia. Advani Oerlikon electrodes,with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directionss of Engineer-in-Charge.MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. | 500 | Rmt. | 2,500 ₹12,50,000 | 2,450 ₹12,25,000 Lowest | 2,800 ₹14,00,000 |
| 3.00 | Supplying and lowering of IS Marked 125 mm NB 5 mm thick fin cut MSERW casing pipes as per IS 4270:2001 and requriement of ODEX attachments from approved manufacturing complete in all respect as per direction of Engineer-in- Charge. | 500 | Rmt. | 1,950 ₹9,75,000 | 1,900 ₹9,50,000 Lowest | 2,200 ₹11,00,000 |
| 4.00 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-Charge. | 5 | Nos. | 6,500 ₹32,500 | 6,000 ₹30,000 Lowest | 8,000 ₹40,000 |
| 5.00 | Collection and preservation of soil samples in polythene bags complete in all respects as per the directions of the Engineer-in-Charge. | 5 | Nos. | 40 ₹200 | 30 ₹150 Lowest | 100 ₹500 |
| 6.00 | Development of bore well and yield testing with air compressor through V notch and disinfection etc. complete in all respects as per IS-2800-1979 and as per directions of the Engineer-in-Charge. | 5 | Hour | 7,000 ₹35,000 | 6,500 ₹32,500 Lowest | 8,000 ₹40,000 |
| 7.00Supplying and lowering of IS marked riser pipes, medium elass screwed and socketed and welded as per IS: 1239-1990 (Part-l) with upto date amendments, electrie resistancewelded including cost of all cuttings,threadings and welding, wherever required, in random lengths of 3 mtrs.inclusive of transportation charges to the site Complete in all respects as per directions of Engineer-in-Charge, The seamless socketa shall be provided as per IS: 13050-1991. | ||||||
| 7.01 | 65 mm dia GMS pipes(М) | 150 | Rmt. | 600 ₹90,000 | 500 ₹75,000 Lowest | 800 ₹1,20,000 |
| 7.02 | 32 mm dia GMS pipes (M) | 350 | Rmt. | 500 ₹1,75,000 | 420 ₹1,47,000 Lowest | 570 ₹1,99,500 |
| 8.00 | Supply and erection of IS marked India Mark-III deepwell hand pumps (65mm) conforming to IS: 13056-1991 consiting of pump head assembly, cylinder assembly and seven connecting rods complete in all respect, for installation up to 30 m depth as per directions of Engineer-in-Charge. | 1 | No. | 22,000 ₹22,000 | 20,000 ₹20,000 Lowest | 24,000 ₹24,000 |
Tender Value
₹28.7 L
EMD Value
₹57,480
Closing Date
15 Jun 2026, 5:00 pmClosed
Executive Engineer
Executive Engineer Jal Shakti Division Keylong District Lahaul Spiti HP
Phase III IV Location Trilokinath 0 point to Tindi SH Drilling of Borewells installation of hand pumps at various locations Job I
2026_HPIPH_135876_1
2420-2465 dated 05.06.2026 Shifting of handpump Sansari Killar Thirot Tandi
Open Tender
Civil Works
Item Rate
90 days
Jal Shakti Division Keylong Lahaul Spiti HP
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,000
EE Keylong
₹57,480
1 Sept 2026
6 Jun 2026
16 Jun 2026
6 Jun 2026
15 Jun 2026
6 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Transportation of suitable truck / tractor mounted where road available or with portable rigs where road not available with DTH / ODEX / Percussion / Calyx / Rotary alongwith necessary accessories etc. to the site of work and erection including levelling of site etc. complete in all respects as per directions of Engineer - in - Charge. | 5 | Nos. | - | - |
| 2 | Drilling bores of 152 mm dia. as per IS: 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable stores, bits, water,POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25 mm dia. Advani Oerlikon electrodes,with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directionss of Engineer-in-Charge.MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately. | 500 | Rmt. | - | - |
| 3 | Supplying and lowering of IS Marked 125 mm NB 5 mm thick fin cut MSERW casing pipes as per IS 4270:2001 and requriement of ODEX attachments from approved manufacturing complete in all respect as per direction of Engineer-in- Charge. | 500 | Rmt. | - | - |
| 4 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of the Engineer-in-Charge. | 5 | Nos. | - | - |
| 5 | Collection and preservation of soil samples in polythene bags complete in all respects as per the directions of the Engineer-in-Charge. | 5 | Nos. | - | - |
| 6 | Development of bore well and yield testing with air compressor through V notch and disinfection etc. complete in all respects as per IS-2800-1979 and as per directions of the Engineer-in-Charge. | 5 | Hour | - | - |
| 7Supplying and lowering of IS marked riser pipes, medium elass screwed and socketed and welded as per IS: 1239-1990 (Part-l) with upto date amendments, electrie resistancewelded including cost of all cuttings,threadings and welding, wherever required, in random lengths of 3 mtrs.inclusive of transportation charges to the site Complete in all respects as per directions of Engineer-in-Charge, The seamless socketa shall be provided as per IS: 13050-1991. | |||||
| 7.01 | 65 mm dia GMS pipes(М) | 150 | Rmt. | - | - |
| 7.02 | 32 mm dia GMS pipes (M) | 350 | Rmt. | - | - |
| 8 | Supply and erection of IS marked India Mark-III deepwell hand pumps (65mm) conforming to IS: 13056-1991 consiting of pump head assembly, cylinder assembly and seven connecting rods complete in all respect, for installation up to 30 m depth as per directions of Engineer-in-Charge. | 1 | No. | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.56 MB
Form6.pdf
Tender Documents • 0.43 MB
Form8ShiftingHandpump.pdf
Tender Documents • 1.42 MB
TCShiftingHandpump.pdf
Additional Documents • 0.22 MB
SpecificationShiftingHandpump.pdf
Additional Documents • 0.19 MB
BOQ_201181.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .