ADDITION/ALTERATION TO VARIOUS ROOMS AND HANGER INFRASTRUCTURE IN T7 AND T8 AT AF STN AGRA

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings and ridges complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for wind Ties etc complete all as specified.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (minimum) as in roof covering or cladding to walls, fixed with self tapping screws as specified embedding in cement sand mortar alongwith other labour and materials required to complete the work all as specified & directed.

Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering or cladding to walls, fixed with self tapping screws as specified embedding in cement sand mortar alongwith other labour and materials required to complete the work complete all as specified and directed.

Supply & Fixing 0.8 mm thick plain galvanised iron steel sheeting in ridges, hips, valley & gutters, drip and straight flashing (length & girth as fixed) with grade of zinc coating 275 gm per Sqm of shets complete all as specified & directed.

Supply & Fixing mild steel works as in wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc and for valley gutters etc including all neccessary drilling, bolting or riveting etc and similar works confirming to Fe-410 or Fe-310 upto any height of building complete all as specified.

Supply & Fixing GI Powder coated snap grid frame work of size 605x605mm with main runner (32x24x6.5mm) cross tee (27x24x2.4mm) and moulding (19x19mm) for false ceiling including fiing arrangement with roof complete all as specified & directed.

Material & Labour 4mm thick non AC fiber cement building board fixed in ceiling of size 600x600mm fixed of laid / inserted to aluminium frame work complete all as specified & directed.

Material & Labour for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat / curved surface including sunk and raised moulding over 2nd class soft wood fillets or metal frame work and reinforced with GI wire mesh (Fillets, metal frame work and GI wire mesh paid separately) complete all as specified & directed.

Material & Labour for Second Class hard wood as in plain fillets exceeding 13 Sqcm and not exceeding 25 Sqcm sectional area, square, rectangular or triangular in section, clean sawn, secured with nails or beads complete all as specified & directed.

Material & Labour wire netting 12mm x 12mm of galvanised steel wire 1.40mm dia fixed with tinned tacks of steel wire staples complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings or paths not exceeding 15 cm thickness (below or above ground level) and removing rubbish from site (approx 500 RM) complete all as specified & directed.

Material & Labour 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm stone aggregate as in sub base of flooring complete all as specified & directed.

Surface excavation not exceeding 30 cm deep in soft / loose soil and getting out complete all as specified and directed.

Removing excavated material not exceding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (Using 40 mm graded stone aggregate) as in pathway complete all as specified and directed.

Material & Labour 75mm thick cement concrete 1:4:8 type D-2 using 40mm crushed stone aggregate) as in sub base of floor of complete all as specified & directed.

M&L for Providing and laying 60mm thick factory made chanmfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks lawns,drive ways or light traffic parking etc. of required strength, thickness & size /shape, made by table viratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine river sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or wihtout grooves (thickness of joints except at sharp curve shall not be more than 5mm), including making drainage opening wherever required complete all as specified and directed.

Material & Labour for 10mm thick rendering in Cement sand Mortar in 1:4 for backing coat finishing surface rough to receive tilling complete all as specified & directed.

Material & Labour for 15 mm thick screed bed or bedding layer in cement sand mortar in 1:6 for laying floor finishes / tiles complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/backing and removing rubbish off the premises complete all as specied & directed.

Material & Labour 9mm to 10 mm thick vitrified ceramic light shade tiles (square / rectangular) area of each tile not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour or shade of tiles complete all as specified & directed.

Material & Labour 9 mm to 10 mm thick vitrified ceramic light shade tiles (square / rectangular) area of each tile not exceeding 0.36 Sqm on vertical surface such as in skirting / dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour or shade complete all as specified & directed.

Material & Labour 7-8 mm thick Non Skid Coloured Ceramic tiles area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in each as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour or shade of tiles complete all as specified & directed.

Material & Labour 7-8 mm t hick Non Skid Coloured Ceramic tiles area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in each as in vertical surface such as skirting / dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour or shade of tiles complete all as specified & directed.

Material & Labour Glazed Ceramic coloured tiles 300x450x7mm thick on vertical surface such as in dado/skirting set and jointed in neat cement slurry and pointed with white cement mix with colouring pigment including 10mm thick rendering in CM (1:4) complete all as specified and directed.

Taking down of cement plaster on brick walls etc including hacking out joints hacking for key, scrubbing down with water etc and removing rubbish from site complete all as specified & directed.

Material & Labour for removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in cement mortar; not previously plastered; and scrubbing down with water etc to receive plaster complete all as specified & directed.

Material & Labour 15 mm thick rendering in cement sand mortar in 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

Material & Labour 15 mm thick rendering in cement sand mortar in 1:6 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

Supply only liquid water proofing compound ISI marked.

Material & Labour scrapping out loose mortar / concrete by chiseling or steel wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer of make approved by GE as per manufacturers Instructions and fixing of hard drawn steel wire fabric (measured & paid separately) and apply 25 mm average thickness in cement concrete 1:2:4 type B-0 using 12.5 mm crushed stone aggregate mixed with water proofing compound and finally rendering 10 mm thick plaster in CM 1:4 using liquid water proofing compound in the proportion recommended by the manufacturer complete all as specified & directed.

Supply & Fixing hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt wt not exceeding 4 Kg per Sqm complete all as specified & directed.

Material & Labour preparation of newly plastered surfaces with sand or emery paper and applying two coats of oil emulsion distemper white or tinted over a coat of wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and apply one coat of oil primer on treated surface complete all as specified & directed.

Material & Labour for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil emulsion distemper white or tinted over complete all as specified & directed.

Material & Labour Complete removal of existing treatment, old painted surfaces of walls with sand or emery paper or steel wire brushe and wash with water complete all as specifed & directed.

Material & Labour for finishing walls surface with Acrylic Smooth exterioremulsion paint of required colour or shade on new work (Two or more coats applied @ 1.67 ltr per ten Sqm over and including priming coat of exterior primer applied @ 2.20 Kg per ten Sqm) complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames not exceeding 1.5 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed.

Supply & Fixing Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as specified and the directions of Garrison Engineer. Note:- (i) Glass & wire gauage shall be measured and paid separatly under respective items. (ii) For payment purose weight of aluminium section shall only be measured, however cost of aluminium mongery, hinges, rubbergasket, cleat, SS screw are included in quoted rates and weight of the same shall not measure for payment purpose.

Supply & Fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as specified and the directions of GE Note : Glass & wire gauage shall be measured and paid separatly under respective items) (ii) For payment purose weight of aluminium section shall only be measured, however cost of aluminium mongery, hinges, rubbergasket, cleat, SS screw are included in quoted rates and weight of the same shall not measure for payment purpose.

Supply & fixing Double action floor door springs hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & directed.

Supply & Fixing 30mm thick flush door shutters made with particle board solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.

Supply & Fixing aluminium (Die cast) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 85 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified & directed.

Supply & Fixing 5.5mm thick sheet glass ordinary quality for Aluminium frames fixed with aluminium cleat and rubber beading in each pane exceeding 0.5 Sqm each complete all as specified & directed.

Supply & Fixing factory made solid PVC door frame of size 50 mmx47mm made out of 5 mm plain colour PVC sheet reinforced with 19x19 mm MS square tube and 1.2 mm wall thickness complete all as specified & directed.

Supply & Fixing 30 mm thick factory made solid panel PVC door shutter consisting of frame made out of MS tubes of 19mm x 19 mm for styles and 15mmx 15mm for top & bottom rails complete as per manufacturer's specifiecation and direction of GE.

Supply & Fixing 30 mm thick factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, wire gauzed panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes wire gauge shall be stretched to tighten firmly suppling & fixing in the frame at site as per specification & drawing complete all as specified & directed.

Material & Labour for framed work as in doors or gates made with angle or other section with gusset plates, rails, braces complete drilled for fixing of steel sheeting or other covering doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E-165) complete all as specified & directed.

Supply & Fixing 100mm butt hinges medium weight cold rolled mild steel fixed with steel screws complete all as specified & directed.

Supply & Fixing 200mm long Aluminium anodised barrel tower bolts of extruded aluminium section fixed with steel screws complete all as specified & directed.

Supply & Fixing 125mm extruded aluminium anodised alloy handels fixed with steel screws complete all as specified & directed.

Taking down door shutters of any description area not exceeding 1 Sqm each and re-fixing in the same opening including easing and adjusting and also re-fixing builders hardware as required including renewal of unserviceable screws replacing decayed members of door shutters / frame / panels of plywood completed all as specified & directed. Note : Renewal of builder's hard ware articles, if specially ordered, shall be meaured & paid for at 'supplied only' rates here-in-below.

Taking down door shutters of any description area exceeding 1 Sqm & not exceeding 2 Sqm each and re-fixing in the same opening including easing and adjusting and also re-fixing builders hardware as required including renewal of unserviceable screws replacing decayed members of door shutters / frame / panels of plywood completed all as specified & directed. Note : Renewal of builder's hard ware articles, if specially ordered, shall be meaured & paid for at 'supplied only' rates here-in-below.

Supply & Fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or clips complete all as specified and directed.

Supply & Fixing in repairs for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed to wooden or steel door or windows complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / iron or aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply & Fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square or rectangle area not exceeding 0.5 Sqm in each pane complete all as specified & directed.

Supply only 100mm butt hinges medium weight cold rolled mild steel complete all as specified & directed.

Supply only 100mm long Aluminium anodised barrel tower bolts of extruded aluminium section complete all as specified & directed.

Supply only 150mm long Aluminium anodised barrel tower bolts of extruded aluminium section complete all as specified & directed.

Supply & Fixing in repair 250mm long aluminium alloy anodised sliding door bolt with hasp, staple (clip & bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed with SS bolts & screws complete all as specified & directed.

Supply & Fixing in repair 125mm extruded aluminium anodised alloy handels fixed with steel screws complete all as specified & directed.

Supply & Fixing in repair PVC SWR pipes 160mm bore single socketed in any length with rubber ring joints laid in floors or fixed to walls with and including MS clamps of required size complete all as specified and directed.

Supply & Fixing in repair 160mm bore PVC (SWR) bends any radius jointed with rubber adhesive complete all as specified & directed.

Supply & Fixing in repair stainles steel kitchen sink with drainage board made out of stainless steel 1mm thick steel sheet for kitchen with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever mild steel brackets and connecting unions to pipe over all size 915mmx460mm with bowl size 410mmx330mmx160mm including PVC waste pipes 40 mm dia 600 mm long complete all as specified & directed.

Fixing only in repairs Wash hand basins Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified & directed.

Supply & Fiixng 15 mm boe Pillar taps cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered "Hot or Cold" complete all as specified & directed.

Supply & Fixing in repair vitrous china urinal half stall type white colour including flush pipe & waste pipe, urinal coupling and urinal spreader) flat back including necessary mild steel bracket complete all as specified and directed.

Supply & Fixing in repair viitreous china wash down water closet (padestal pattren) white pan and trap, including connection to down (or outgoing pipe) and top flushing pipe anti syphonic pipe includng white plastic seat cover white closed pattern with flat bottom and cover & MS CP or aluminium hinging device complete all as specified and directed.

Supply & Fiixng in repair viitreous china water closet of size 580x440mm (squatting pan (Orrisa pattern) with integral foot rest white pan and trap, including connection to down (or outgoing pipe) and top flushing pipe anti syphonic pipe complete all as specified & directed.

Supply & Fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified.

Supply & Fixing in repair 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white colour with inlet, ball valve, float and PVC handle including mild steel brackets, PVC flush pipe of polyethylene of high density PVC 32mm dia for low level cistern complete all as specified & directed.

Supply & Fixing in repairs 15 mm bore Bib taps chromium palted fancy type with long body, cast copper alloy with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

Supply & Fixing in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Supply & Fixing in repair 15 mm dia chromium plated angle valve fancy type capstan head, screwed both ends, fixed with galvanised iron water tubing complete all as specified & directed.

Taking up or down 15 mm bore steel water tubing and connections including removing from site complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including removing from site complete all as specified and directed.

Supply & Fixing 15mm bore galvanised steel iron water tubeing medium grade with all fittings like sockets, bends or tee and fixed complete to walls with steel clamps (concealed) ceilings or laid in floors complete all as specified and directed.

Supply & Fixing 20mm bore galvanised steel iron water tubeing medium grade with all fittings like sockets, bends or tee and fixed complete to walls with steel clamps (concealed) ceilings or laid in floors complete all as specified and directed.

Supply & Fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long fixed with rawal plug or steel screws on walls complete all as specified & directe.

Supply & Fixing in repair 500 litre capacity rotational moulded polye thylene water storage tanks in white colour (cylindrical vertical with closed top) hoisted and fixed in position including dismantling / taking old water tanks and removing from site complete all as specified & directed.

Supply & Fixing Toilet paper holder with flat recessed type stainless steel Complete all as specified & directed.

Material & Labour stainless steel pipe curtain rod made with 25 mm dia pipe having wall thickness 1.20 mm with two Stainless steel SS grade 304 ends brackets fixed with steel screws and PVC sleeves complete all as specified and directed.

Supply & Fixing Chromium plated Towel rail of 600mm long of fixed with & including steel screws & wooden / plastic cleats complete all as specified and directed.

Material & Labour for 18-20mm thick granite stone slab in single piece (of any type) work on table rubbed and polished as in steps, door jambs, pillars, window- cills, cooking platforms & counter of wash hand basin and like bedded over and including 20mm thick screed bed in cement sand mortar in 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour or shade with approved shade of granite including rounding or moulding of outer edges and making hole in slabs in suitable place for gas pipe complete all as specified and directed.

Supply & Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both end for fitting galvanised iron pipe complete all as specified and directed.

Taking down panel / frame from bird proofing level to gound and re-fixing the same to its original position after repairs complete all as specified & directed.

Supply & Fixing in repair anodised aluminium fillets as in frame work of any size and any thickness (weight not less than 200 gm / RM) for fixing of wire mess at height upto 15 mtr including jointing cleats screws dash fasteners, plugs for fixing with walls / ceilling complete all as apecified & directed.

Supply & Fixing in repair Wire netting (size of mesh 20mmx20mm) of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples etc including re-fixing of existing fillets complete all as specified & directed.

Taking down existing roof treatment any thickness including plastering, leaping plaster of any thickness cuting & taking out up rooting tree roots / Vegitation growth & removing the debris / rubbish outside MD (approx 500 RM) land including cleaning / washing down and keeping surfaces clean with water complete all as specified & directed.

Demolition of cement concrete (unreinforced) in roofs, floors (other than ground floors) beams, staircases , landing, chajjas and similar suspended work complete all as specified & directed.

Material & Labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning grouting with cement sand slurry 1:3 complete all as specified & directed.

Maerial & Labour for Cutting grooves in brick walls 75mm wide and 65mm deep and shaping horizontal face of groove finished with cement sand mortar in 1:3 complete all as specified & directed.

Material & Labour for plain cement concrete 1:2:4 type B-1 using 20mm crushed stone aggegate as in levelling course / padding over roof surface complete all as specified & directed.

Material & Labour 10 mm thick screed bed in cement sand mortar in 1:4 on cleaned roof surface complete mixed with Liquid water proofing compound as per manufacturers Instructions with and including WPC liquid @ 200 ml per 50 Kg of bag of cement over roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified roof membrane over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification complete all as specified & directed :- (a) Cleaning existing surface properly. (b) Applying bitumenous primer @ 0.40 litre per Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade temperature on prepared cleaned roof surface. (c) After primering surfaces, entire roof shall be applied with hot blown bitumen grade 85/25 conforming to IS : 702 @ 1.20 Kg per Sqm. (d) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3 Kg per Sqm reinforced with non woven polyster fiber weight not less than 160 gsm/Sqm using butane torch by torch application with 100mm side laps and 150mm end lap. Physical property of membrane shall be as under :-

(i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160 gsm/Sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650/Sqcm and transverse not less than 450/sqcm at 230 degree Celsius. (v) Tear strength - longitudinal not less than 300 N & transverse not less than 250N. (vi) Elongation of reinforcement not less than 30%. (vii) Impermeability under water pressure not less than 3 Kg/Sqcm. (d) APP membrane shall be laid using butane torch by Torch application with minimum 100mm side overlap and 150mm end lap.

Material & Labour prepration of newly or previously untreated surfaces and applying two coat of heat resistent (Solar reflective) paint (aluminium paint @ 0.20Kg per Sqm or as per manufacturer Instruction) over and including a coat of primer on water proofing membrane surfaces of any description / concrete / brick or stone surface area exceeding 100mm in width or girth complete all as specified & directed.

Material & Labour for preparation of old steel surfaces of any description over 10cm in width or girth not otherwise described and applying One coat of Synthetic enamel paint complete all as specified & directed.

Material & Laour for preparation of old steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of aluminium paint complete all as specified & directed.

Supply & Fixing in repair Hangar door, hangar door frame including rail, Roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde E- 250) quality A complete complete all as specified & directed.

Demolition of Stone slabs and tiles of any description or any thickness as in floors, aprons laid bedded and pointed in any mortar removing from site complete all as specified & directed.

Material & Labour for Providing PCC 1:2:4 type B 0 using 12.5mm crushed stone aggregate as in lintels upto 1.5m clear span, door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including use of necessary steel formworks (straight or curved) complete all as specified & directed.

Material & Labour for pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates in cover slabs for man-holes or drain cover slabs (for man holes), chajjas, shelves and similar articles with plain faces set in CM (1:4) complete all as specified and directed. Note :- Reinforcement shall be measured and paid under respective item.

Material & Labour for mild steel TMT bars 10 mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with MS clips complete all as specified & directed.

Supply & Fixing for steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as sepecified & directed.

Material & Labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floor and paving exceeding 15 cm thickness (below or above ground level) complete all as specified & directed.

Pavement quality concrete(PQC) of minimum 28 days field Flexural strength of 45Kg/ Sqcm or 4.5 Mpa, aggregate gradation as per Table 3 of IRC 15 2017, coarse aggregate of clean, hard strong, dense non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cement with non circular virgin synthetic fibre of 12-18 mm length specific gravity 1.34 to1.39 UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240 °C and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacture. PQC laid spread and compacted with slip-form paver of minimum 7.50 m width, including curing and tinning by Texturing cum Curing Machine complete all as specified and directed Required surface texturing to be done as specified in Clause 10.1.14 and Table 9 of IRC 15-2017 complete all as specified and directed.

M&L for Forming 25 mm width expansion joint in concrete slab for full depth of PQC. Early entry saw and subsequent cutting by using diamond bit cutter of appropriate size. straight and smooth edges. Join cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. The join then filled with pre-molded 25 mm thick compressible polyethylene closed cell type filler board as specified thereafter application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant Placing of closed cell medium density, crossed linked polyethylene foam backup rod of 30 mm dia, over filler board and filled with polyurethane based sealant complying with BS5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of+/- 30% having minimum 10 year performance guarantee applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacture complete as specified and directed.

M&L for Cutting of construction joints 25 mm deep and 10 mm wide by early entry saw cut using diamond bit cutter of appropriate size, straight and smooth edges. Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Placing of closed cell medium density, crossed linked polyethylene foam backup rod of 12 mm dia, application of bond breaker tape on top of back up rod for complete width of the joint and filled with polyurethane based sealant complying with BS-5212, BS 4254 and EN- 141875- 2003 with minimum movement accommodation factor (MAF) of +/- 30% having minimum 10 year performance guarantee, applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacturer complete as specified and directed.

M&L for Forming dummy/contraction joint with an initial saw cut of 3 mm soon after the concrete has set, upto a depth of 1/3rd to 1/4th the thickness of the slab widening the first saw cut to 6 mm and 24 mm deep by using diamond bit cutter of appropriate size straight and smooth edges Joint cleaned thoroughly with application of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before placing the backup rod and pouring the sealant. Placing of closed cell, medium density, crossed linked polyethylene foam backup rod of 8 mm dia application of bond breaker tape on top of back up rod for complete width of the joint and filled with polyurethane based sealant complying with BS5212, BS 4254 and EN-141875-2003 with minimum movement accommodation factor (MAF) of +/- 30% having minimum 10 year performance guarantee applying masked tape on the edges of joints and removing the masking tape after filling of sealant as per the method specified by the manufacture complete as specified and directed.

Material & Labour for preparation the dry concrete surface using Mild scarification / Grinding equipment remove any loose material, contaminations and laitance to provide a sound, fine gripping surface cut 6mm groove with @ 1.0 mtr interval in both direction clean the entire floor area using am powerful industrial vaccum cleaner complete all as directed.

Material & labour for applying 5mm Polyurethane Flooring medium to heavy duty, solid colour three component, water dispressed polyurethane based self smoothening floor @ 21N Purcen (IN) at 5mm thickness (scratch coat+ body coat) having (a) Compressive strength >45 Mpa after 28 days at 27 degree celcius as per ASTMC 579. (b) Flexural strength -14.7 Mpa after 28 days at 27 degree Celcius as per ENISO EN 196 (c) Tensile strength - 6.5 Mpa after 7 days at 27 degree Celciud as per EN-ISO-527-2. (d) Thermal expansion co-efficient = 1.6x10 power-5 mm/degree celcius as per ASTM D-696, (e) Bond Strength - > 2.5 N. mm2 as per EN 1542 (f) Shore D hardness- 80 to 85 as per ASTM D 2240 (g) Abrasion resistance 861 mg as per ASTM D 4060 - H-22/1000 Cycles/1000g (h) Impact resistance - > 20 joules at 4mm thickness as per IS : 101 Part 5 : 1999. (j) Indentation - 0% as per MIL PRF-24613

Excavation over areas exceeding 1.5 Mtr & not exceeding 3.0 Mtr deep and getting out in soft or loose soil complete all as specified & directed.

Excavation over areas not exceeding 1.5m deep and getting out in soft or loose soil complete all as specified & directed.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth, or not exceeding 10 Sqm on plan area, for foundation, foundation of poles, stay assemly, laying of pipes or cables and the like and getting out in soft loose soil complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in each layer as in soil complete all as specified & directed.

Removing excavated material not exceeding 500m and depositing where directed at a level not exceeding 1.5M above the starting point complete all as specified & directed.

Removing excavated material exceeding 1.5 Km and not exceeding 5 Km and depositing where directed at a level not exceeding 1.5M above the starting point complete all as specified & directed.

Material & Labour for hardcore of broken / crushed stone gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 150 mm thick, watered and rammed to a true surface complete all a specified & directed.

Material & Labour for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregates as in foundation or mass filling concrete complete all as specified & directed.

Material & Labour for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregates as in foundation or mass filling concrete complete all as specified & directed.

Material & Labour for PCC 1:2:4 type B-0 using 12.5 mm crushed stone aggregates as in surface channels & drains including necessary moulding if required complete all as specified & directed.

Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends complete all as specified & directed.

Material & Labour for Brick work with sub Class 'B' bricks straight or curved on plan exceeding 6 m mean radius, built in Cement sand Mortar in 1:4 complete all as specified & directed.

Material & Labour for Brick work with sewer bricks straight or curved on plan exceeding 6 m mean radius for man-holes/ septic tank/ soakage well or in sewer works, built in Cement sand Mortar in 1:4 complete all as specified & directed.

Material & Labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for pipe of 150mm bore pipes complete all as specified & directed.

Material & Labour 150 mm dia reinforced cement pipe class NP-3 laid and joined with cement joint complete all as specified & directed.

Material & labour for Construction of LLDPE septic tank for 20 users designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft connection etc complete all as specified and directed.

Material & Labour Construction Soakage well excavation in ordinary soil, PCC 1:3:6 type C-2 using 40 mm crushed stone aggregate in foundation, wells of honey combed and solid brick work built in CM 1:4, RCC slab covers with RCC 1:2:4 type B-1 using 20 mm crushed stone aggregate, filling with brick bats not exceeding 63 mm, complete of size 1.20 mtr dia and 3.0 mtr clear deep.

Material & Labour for loose filling with coarse stone aggregate of gauge 50-100mm in bore well for recharge of well complete all as specified & directed.

Material & Labour for loose filling with coarse stone aggregate of gauge 5-10mm in bore well for recharge of well complete all as specified & directed.

Material & Labour for course river sand / pea size gravel filling in bore well for recharge of well complete all as specified & directed.

Material & Labour for RCC design mix M-25 grade using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels & similar works complete all as specified & directed.

Material & Labour for form work to fair finished surface for soffits and sides of RCC beam complete all as specified & directed.

Material & Labour trail bore upto 250mm dia & upto 200 mtr depth below normal ground level in any kind of soil / strata including hard stone / boulder etc complete all as specified & directed.

Reaming or enlargement of bore hole upto 525mm dia from depth exceeding 60 mtr to 200 mtr including casing pipe (HDPE) of 250 dia and wall thickness 8mm and filling of pea size gravel surrounding the pipes complete all as specified & directed.

Supply & Fixing HDPE pipe 250mm bore of pressure rating 6Kgs/Sq Cm fixed complete all as specified & directed.

Supply & Fixing HDPE perforated pipe 250mm bore of pressure rating 6Kgs/Sq Cm fixed complete all as specified & directed.

Supply & Fixing HDPE perforated pipe 150mm bore complete all as specified & directed.

Taking down old unserviceable copper / aluminium point wiring (light, fan, socket, power socket and bulk head light fittings) on surface wiring on wooden batten / casings & caping complete, including fixture and fittings such as switches, ceiling roses, pendents holder, regulators, sockets and defective main switch / DB / MCB / Metal plugs by unscrewing carefully from boards and making good to disturbed surfaces of walls complete all as specfied & directed.

Taking down old unserveciable sub main wiring 4 / 6 / 10 Sqmm aluminium or copper conductor including batten / conduit and making good disturbed surface to match the existing surface and removing material from site complete all as specified & directed.

Taking down old unserviceable XLPE cable of any type & any size from walls / ceilings / truss from hanger complete all as specified & directed.

Taking down Main Switch / MCB DB / AC enclosure / Three phase enclosure by disconnecting the electric supply complete all as specified & directed.

Material & Labour for point wiring for light / fan point controlled by one switch with 1.5 Sqmm single core 1100 Volt grade FRLSH PVC insulated unsheathed multi-stranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including mild steel pressed steel (min 1.0 mm thick) sunken box coered with 3mm thick ISI marked laminated phenolic bonded sheet fixed with chromium / Nickel plated or steel screws and washers for switches and sockets, including 1.5 Sqmm single core 1100Volt grade FRLSH PVC insulated unsheathed stranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area and white wash / colour wash to matching with the existing colour and all as specified and directed .

(a) One light / fan or exhaust fan point controled by one way 5 Amp piano switch

(b) All as per srl item No. 149 above but for 5 pin 5 Amps socket outlet on same board complete all as specified and directed.

M&L for 5/6 Amps socket outlet on independent board point wiring complete with stranded copper conductor 2.5 Sqmm size (Nominal area) PVC insulated unseathed cable FRLSH in and including concealed PVC conduit ISI marked medium grade not less than 20 mm dia with all accessories such as TEE, bend,elbow , reducers, socket and junction boxes etc, concealed sunk in pressed steel terminal boxes of required size of thickness 1.6 mm factory made and painted with stove enameled black paint and bituminous coat of external portion to prevent the rust with top cover 3 mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 2.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting /fixturer, and cable ends will be terminated with suitable brass thimbles to prevent the heating of termination point complete all as specified and directed.

Supply & Fixing switch piano flush type one way 5 Amp single pole 240 volt complete all as specified & directed.

Supply & Fixing socket outlet 2 in 1, 5 pin 5/6 Amps flush type 240 volts complete all as specified and directed.

Supply & Fixing ceiling rose 65x50mm three terminals polycarbonate body with back plate complete all as specified and directed.

Supply & Fixing ceiling fan regulator,Socket type (3 Module 120 Watt), electronic stepped type, 5 stage speed regulation suitable for BLDC fan, ISI marked complete all as specified and directed.

Supply & Fixing Wall / surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long) extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic driver complete with all accessories internally pre-wired and including connecting up with 2 core twisted flexible copper conductor cable 0.75 sqmm complete all as specified & directed. Make : - Orient Electric (Cat No : LBLN - 20 - C - AL) / Halonix (Cat No :HLB-03-20-CW-AL-SQ) / Bajaj (Cat No : BCLSBAL 20 W CW) or equivalent model in list of Makes mentioned in tender

Supply & Fixing Wall / surface mounted type LED light fitting batten type complete with LED lamp 05- watt (1 feet long) poly carbonate body and integrate electronic driver complete with all accessories internally pre-wired and including connecting up with 2 core twisted flexible copper conductor cable 0.75 sqmm complete all as specified & directed. Make :- Halonix (Cat No : HLB-07-05-CW-IP) / Havells (Cat No : LHEXBYPNIN1W005) / Bajaj (Cat part No. BCLSB 05 W WH) or equivalent model in list of Makes mentioned in tender.

Supply & Fixing recess mounting LED light fitting 2'x2', 34 - 36 Watt made of CRCA sheet duly powder coated with opal diffuser cover complete with all accessories and making necesary electric connecting up with 3 core twisted flexible copper conductor cable 0.75 sqmm complete all as specified & directed. Make : - Halonix (Cat Part No: HLFPR22 - 02 - 36 CW - III) / Havells (Cat Part No: PLUTONEO2X2PLR34WLED857S) / Bajaj (Cat Part No : BZRSQL 36L LED GX CW) or equivalent model in list of Makes mentioned in tender

Supply & fixing air ventilating fan 300 mm sweep Metallic body AC operated single phase 230 volts, complete with louvers shutters and including PVC insulated 3 core 1.5 Sqmm copper conductor cable from ceiling rose to exhaust fan complete including cutting the square / round hole of required size in wall, finishing the same for distrubed surfaces to match with the adjoining surfaces complete all as specified & directed.

Material & Labour for taking down carefully existing Ceiling Fan / Exhaust Fan / Wall Fan from site before B/R repair work, keeping in safe custody in store for greasing / oiling of ball bearings / bushes and making it for smooth functioning and noise free operation and painting with Hi-Gloss synthetic enamel paint of approved shade, by spray painting after filling cavaties and re-fixing after providing new fan clamp, nuts / bolts, washers, down rod and provision of 3 core 1.5 Sqmm flexible copper conductor cable from ceiling rose to fan connector complete with writing of MES No. xxxx on the body of fan surface complete all as specified & directed.

Material & Labour for point wiring with 2.5 Sqmm single core 1100Volt grade FRLSH PVC insulated unsheathed multi-stranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including pressed MS sheet (minimum 1.0mm thick) sunken box with 3mm laminated Phenolic sheet cover ISI marked suitable for an Independent board 6 pin 15/16 Amps socket outlet, including 2.5 Sqmm single core 1100 Volt grade FRLSH PVC insulated unsheathed multi-stranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface complete all as specified & directed.

Supply & Fixing switch piano flush type one way 15 Amps 240 volts complete all as specified and directed.

Supply & Fixing socket outlet 2 in 1, 5 pin 5/6 Amps flush type 240 volts complete all as specified and directed.

Material & Labour for point wiring complete with FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 4 Sqmm (Nominal area) drawn in and including medium grade PVC conduit ISI marked not less than 20mm dia including FRLSH PVC insulated multi-stranded copper conductor cable of size 4 Sqmm (green colour) as earth continuity conductor, connected to common earth dolly and all sunk / terminal boxes and each fitting / fixture complete with all accessories complete all as specified & directed.

Supply & Fixing concealed type PVC enclousure for Modular switches / sockets duly grouted flush in the wall complete with a 25 Amps modular type plug top 20 Amp 3 pin with one single pole Modular type 'Ç' curve MCB of capacity 20 Amps (1 Module) & one 20 Amps 3 pin modular socket (2 module) including making electrical connections complete all as specified and directed.

Material & Labour for point wiring for hanger security light controlled by one switch complete with FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 1.5 Sqmm (Nominal area) drawn in and including surface steel conduit ISI marked not less than 20mm dia with & including FRLSH PVC insulated multi-stranded copper conductor cable of size 1.5 Sqmm (green colour) as earth continuity conductor connected to common earth dolly and all terminal boxes and each fitting / fixture, complete with all accessories complete all as16 specified and directed.

Supply & Fixing LED Street Light Fittings having Ingress Protection class minimum IP-65, suitable for road lighting luminaire with toughened glass high power LED and maintenance free system for capacity 70-75Watt complete with 32 mm bore light grade GI pipe bracket (1.5m long) duly bent to required shape fixed with & including 2 Nos MS Flat iron (40mmx3mm) clamps, nuts, bolts & washers complete all as specified and directed. Make : - Havells (Cat No : ENDURASUNDOWNSL70WLED765PASYBOTG) / Halonix (Cat No : HLSLD-06-72-CWL-R) / Bajaj (Cat No : ENXT P 84L WH PO PC SD) or equivalent model in list of Makes mentioned in tender.

Material & Labour for flame proof point wiring with FRLSH PVC insulated unsheathed multi-stranded copper conductor cable confirming to IS : 694, 1100Volt AC grade single core of size 2.5 Sqmm nominal cross sectional area for phase & neutral drawn in & including 1.6mm thick concealed ISI marked ERW stove enamelled rigid mild steel conduit conforming to IS : 9537 of size not less than 20 mm dia including flame proof fitting such as mild steel junction box, mild steel Couplings, unions, bends, reducers, inspection elbow, conduits sealing plugs etc & 2.5 Sqmm green colour FRLSH PVC insulated unsheathed multi-stranded copper conductor as earth wire connected to earth dolly by providing lugs complete for an Independent 15 AMP / 16 AMP flame proof socket and body of the flame proof lumiaires and drawn in the same concealed conduit complete all as specified and directed.

Supply & fixing flame proof switch socket & plug combined in LM-6 cable termination box in LM-6, 16Amp, single pole 250Volt complete all as specified & directed.

Material & Labour for flame proof point wiring with FRLSH PVC insulated unsheathed multi-stranded copper conductor cable confirming to IS : 694, 1100Volt AC grade single core of size 1.5 Sqmm nominal cross sectional area for phase & neutral drawn in & including 1.6mm thick concealed ISI marked ERW stove enamelled rigid mild steel conduit conforming to IS : 9537 of size not less than 20 mm dia including flame proof fitting such as mild steel junction box, mild steel Couplings, unions, bends, reducers, inspection elbow, conduits sealing plugs etc & 1.5 Sqmm green colour FRLSH PVC insulated unsheathed multi-stranded copper conductor as earth wire connected to earth dolly by providing lugs complete for flame proof lumiaires and drawn in the same concealed conduit complete all as specified and directed.

Supply & fixing Switch flame proof rotary type with termination box in LM-6, 16Amp, single pole 250Volt complete all as specified & directed.

Supply & fixing CIMFR certified, suitable for gas / vapor group of II A & II B and zone I & II flame proof exhaust fan 305 mm (12") sweep (heavy duty) single phase 220/230 volt AC 1440 RPM, with louvered shutters including mounting frame, nut, bolts, washer, fastners etc and connecting exhaust fan to ceiling rose including provision of three core flexible copper cable of size 1.5 Sqmm not less than 0.5 RM long for making electric connection complete with fixing arrangement and complee all as specified & directed.

Supply and fixing CIMFR certified IP-65 protection, suitable for gas / vapor group of II A & II B and zone I & II Flame proof weather proof fluorescent fixture 2 x 20 Wat x 4 feet long with aluminium alloy LM-6 with wire guard complete with all accessories prewired and including connrction up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

Supply & Fixing MCB DB TPN 6 way Vertical type 440 Volt 3 phase with rated busbar 250 Amps double door type suitable for MCCB as a incomer and MCBs as out going IP 54-IK 09 with metal door double door type grouted in walls with PCC 1:2:4 type B-1 using 20mm crushed stone aggregate complete all as specified and directed.

Material & Labour for MCB DB SPN 4 Way 240Volts made of sheet metal, double door type, with 100 Amp rated bus bar IP-43 (minimum) and grouted flush in walls and matching the disturbed surface with the surroundings complete all as directed.

Material & Labour for MCB DB SPN 8 Way 240Volts made of sheet metal, double door type, with 100 Amp rated bus bar IP-43 (minimum) and grouted flush in walls and matching the disturbed surface with the surroundings complete all as specified & directed.

Material & Labour for MCB DB SPN 12 Way 240Volts made of sheet metal, double door type, with 100 Amp rated bus bar IP-43 (minimum) and grouted flush in walls and matching the disturbed surface with the surroundings complete all as specified & directed.

Supply & Fixing 4 pole MCCB 63 Amps with breaking capacity 16 KA having fixed thermal & fixed magnetic release suitable for 415 Volts 50 Hz AC electric Supply complete including connecting all incoming and outgoing connection by means of suitable size of lugs / thimbles complete all as specified and directed.

Supply & Fixing MCB single pole 240 volts, 'C' curve of rating from 6 to 32 Amps, with rupturing capacity 10 KA including providing thimble for out going cables complete all as specified & directed.

Supply & Fixing MCB SPN 240 volts, 'C' curve of rating from 6 to 32 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified & directed.

Material & Labour for sub main wiring with 4 runs of single core FRLSH PVC insulated multi-stranded copper conductor cable of size 16 Sqmm nominal area with 1 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 16 Sqmm nominal area as earth continuity wire drawing in and including medium grade rigid PVC concealed conduit not less than 50 mm dia including necessary electrical connection complete all as secified & directed.

Material & Labour for sub main wiring with 2 runs of single core FRLSH PVC insulated multi-stranded copper conductor cable of size 16 Sqmm nominal area with 1 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 16 Sqmm nominal area as earth continuity wire drawing in and including medium grade rigid PVC concealed conduit not less than 40 mm dia including necessary electrical connection complete all as secified & directed.

Taking down old damaged / unserviceable air termination rod and removing from site complete all as directed.

Taking down old damaged / unserviceable aluminium / GI strips complete all as directed.

Taking down old unserviceable / damaged earthing and earth pits including test point complete.

Material & Labour for GI tubing light grade 40mm bore for supporting of lightning conductor / earthing lead protection fixed on roof in vertical position of 1.5 mtr length including anchor fastener, stay wire 4mm dia for mounting of lightning conductor and Air termination rod complete as specified.

Material & Labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in base support of struts and other similar location with & including necessary form work if required complete all as specified and directed.

Supply & Fixing GI wire 3.15 or 4 mm dia duly fixed with the GI Pipe and fixed on the hangar roof through hook and anchor fastner to keep the Air Termination rod stable againgst wind pressure complete all as specified and directed.

Supply & Fixing aluminium air termination rod single pointed at top and properly threaded at bottom end12mm dia and 300mm long complete all as specifed and directed.

Supply & Fixing Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hexagonal head screw complete all as specified and directed.

Supply & fixing aluminium strip 25mm x 3.15 mm duly mounted on DMC / SMC Bridge Insulator and fixing screws for fixing the strip on the roof of the hangars complete all as specified & diected.

Material & Labour galvanised iron strip 32mm x 6mm buried in ground duly protected in 40mm bore medium grade GI Pipe or fixed on wall duly mounted on DMC / SMC Bridge Insulators complete upto test point for continuation of earth lead conductor beyond 7.50 RM and inter connection of earthings complete all as specified.

Cutting and screwing existing steel tubing 25mm for alterations or additions done in position without taking down for provisioning of branch connection complete as specified.

Supply & Fixing Unplasticised PVC pipes of pressure rating 10 Kgf/cm² size 15mm bore, including all fittings laid in trenches complete all as specified & directed.

Supply & Fixing Stop Cock PTMT any colour, high pressure screwed for iron pipe by provisionin necessary fittings to fixd the items with UPVC pipes complete all as specified and directed.

Material & Labour for earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 RM deep below ground level with top edge of the plate not less than 1.5 RM below ground level connected to glavanised iron Wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified including 15 mm dia GI steel water tubing medium grade and necessary fitting for protection of GI wire including laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded crushed stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm crushed stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM in (1:6) externally upto 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh including excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No. 3 of SSR Part (2009) and connected to earth test point including testing and marking Bldg Nos and writing Test Results on a 3mm thick painted MS earth pit marking Plate (200mm x 100mm) duly welded with a 450mm long 10mm dia round MS rod, fixed with the earth pit chamber by grouting complete including taking out old unserviceable earthing system including demolishing with old earth pit chambers and removing of debris from the site with levelling the complete ground all as specified an directed.

Materials & Labour for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 RM deep below ground level with top edge of the earth plate at a depth not less than 1.5RM below normal ground level connected to galvanised steel strip 32 mm x 6mm by means of bolts, nuts check nuts and washers of galvanized steel and connected to Panel as directed and including provision of concrete pit in PCC 1:3:6 type C-1, pre-cast RCC 1:2:4 type B-1 cover slab 54 cm x 54 cm x 5 cm (Reinforced with 8 mm dia. TMT bars @ 75 mm, center to center both ways) with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No-3 of SSR Part-I (2009) and connected to earth test point including testing and marking bldg nos and writing test results duly painted on a 3 mm thick MS earth pit marking plate of size (200mm X 100mm) duly welded with a 450 mm long 10 mm dia MS rod fixed with earth pit chamber by grouting complete including taking out old unserviceable earthing system including demolishing with old earh pit chambers and removing of debris from site with leveling the complete groung etc complete all as specified and directed.

DEORA ELECTRIC WORKS

m/s meetu enterprises

VEE SONS BUILDERS PVT LTD

R.C. Magla and Co.

garg construction company

yash enterprises

GUPTA ENGINEERING WORKS