864/WS-35/2022-23

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

M&L for 100 mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring including finished surfaces even and rough complete all as specified and as directed.

M&L for 100 mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in floors finished even and smooth without using extra cement including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 80 mm thick vibratory compacted rubbur moulded glossy coloured precast concrete interlocking paver blocks with grey cement and pigment of any shape and size conforming to IS 15658-2006 of M-40 Grade complete all as specified and as directed. (Coloured and shape of block shall be approved GE) Make : SWASTIK / NITCO / RUCHI

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of newely plastered or unplastered walls surfaces and applying two coat of cement base paint over chalk whiting complete all as specified and as directed

Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25 mm thick cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in levelled course in floors complete all as specified and as directed.

M&L for 20-25mm thick machine cut Kota stone slab in flooring laid over and including 20mm thick cement screed base in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for 20-25mm thick machine cut Kota stone slab as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10 mm thick backing coat in CM (1:3), complete all as specified and as directed.

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for providing, cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete all as specified and as directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

S&F 1.60 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required at site complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on wall and shelves and like complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed and specified.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for rough finished surfaces of concrete, complete all as per specified and directed.

S&F 2nd class soft wood clean sawn timber as in scantling complete all as specified and directed.

S&F plywood 9mm thick grade BWR type BB fixed with nails to timber frame work commercial type as in ceiling complete all as specified and directed.

S&F plywood 6mm thick grade BWR type BB fixed with nails to timber frame work commercial type as in ceiling complete all as specified and directed.

S&F 2nd class soft wood sec area exc 3 & n exc 6 Sqcm plain fillets, square, rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

M&L for preparation of newely plastered or unplastered walls surfaces and applying two coat of distemper oil emulsion over chalk whiting complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in cover slab for manhole etc including necessary form work complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Excavation over areas not exceeding 1.5m deep and getting out in hard / dense soil complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidaly hearted, built in CM (1:6) etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc. 40mm complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncrushed or brought upto course masonry in CM (1:3) complete all as specified and directed.

S&F PVC SWR pipes 110mm dia in any length with rubber ring joints laid in trenches or in floor or as in weep holes complete all as specified and directed.

M&L for broken stone or boulders, hand packing of (any thickness) at back of walls over arches etc and raising (or lowering) to the required level complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in bond stone set in CM (1:4) complete all as specified and directed.

Removing excavated materials exc 50m and n exc 500m and depositing where directed, complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth in layers n exc 25cm thick, watering and removing surplus soild to a distance n. exc 50M and making good surface complete all as specified and directed.

S&F rolled mild steel in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all latice bars, stiffeners, gusset plates, etc confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and as directed

M&L for Cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

M&L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke (FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including medium grade PVC casing and caping on surface with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continuous earth wire with all accessories including lugs required for the following point wiring complete all as specified and directed:-

One light/fan point controlled by one, one way switch.

One 3 pin socket outlet 5 Amps on Independent board.

Description all as per serial item No 47.00 described -here-in-before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and directed.

S&F socket 2 in 1, 3 pin 5 Amps single pole one way complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin 5 and 15 Amps piano flush type single pole one way complete all as specified and directed.

S&F Ceiling rose surface backelite ISI marked with 3 terminal including connecting and testting complete all as specified and directed.

S&F stepped type electronic fan regulator flush type complete all as specified and directed.

S&F LED light fitting fixture 22 W, 6500K, ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified and directed.

S&F ceiling fan complete with blades down rods and accessories 230 volts, 1200 mm sweap with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed. Make : Havells/Crompton/Bajaj/ Orient

M&L for sub main wiring with two runs of 6.0 Sqmm FRLS grade (ISI marked) PVC insulated, multi stranded, unsheathed copper conductor and one run of PVC insulated, multistranded FRLS grade (ISI marked) unsheathed copper conductor of size 6.0 Sqmm green colour as earth lead including PVC casing caping of suitable size complete all as specified and directed.

S&F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 4 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surfaces complete all as specified and directed.

S&F MCB SP 6 to 30 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

S&F MCB SPN 32 amps, 240 V, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity all as specified and directed.

M&L for earthing with galvanized steel earth plate electrode 600 x600 x6 mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire of 4 mm thick by means of nuts bolts, washers, check nuts of iron or steel including test point PCC pits and RCC cover in PCC (1:2:4) type B1 medium grade GI watering pipe 20mm dia with funnel and wire mesh and 40 mm bore GI pipe light grade proection pipe up to test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I.

M/S PARVEZ AHMAD LONE

M/S Paradise Constructions

M/S ATTAR BUILDERS

ZAHOOR ENGINEERING WORKS

mirandcompany

M/S Vivek Gupta and Co

M/S MUSHTAQ AHMAD BHAT

M/S Ghulam Mohammad Shalla