Constr of Guard rest room with attach bathroom for permanent security guard along the boundary adjucent to village Hasanpura and Prempura at Mil Stn under GE(S) Jaipur

Amount

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil 53/LBW/61SA/20-21/Q3W-278.5 54/LBW/61SA/20-21/Q3W-136.5

M&L PCC (1:4:8) type D2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete 53/LBW/61SA/20-21/Q3W-8.5 54/LBW/61SA/20-21/Q3W-8.5

M&L brickwork with subclass `B' bricks, straight/curved on plan exc 6m mean radius, built in CM (1:6) 53/LBW/61SA/20-21/Q3W-58 54/LBW/61SA/20-21/Q3W-58

M&L RCC 1:2:4 Type B1 using 20mm graded stone aggregates in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed 53/LBW/61SA/20-21/Q3W-6 54/LBW/61SA/20-21/Q3W-6

M&L RCC 1:2:4 Type B1 using 20mm graded stone aggregates in Slabs supported on walls, beams & columns in floors, roofs, landings, balconies, canopies, deck slabs & in shelves and the like 53/LBW/61SA/20-21/Q3W-11 54/LBW/61SA/20-21/Q3W-11

M&L for RCC 1:2:4 Type B1 using 20mm graded stone aggregates in in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete 53/LBW/61SA/20-21/Q3W-7.5 54/LBW/61SA/20-21/Q3W-7.5

M&L for RCC 1:2:4 Type B1 using 20mm graded stone aggregates in as in Beams, cantilevers, bressummers, lintels over 1.5m span 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S&F IInd cl HW (Sal/hollock) 35 MM thick glazed and skeleton shutters open rebated and prepared to recive glass /gauze etc with out sash bars all as specified. 53/LBW/61SA/20-21/Q3W-2.5 54/LBW/61SA/20-21/Q3W-2.5

S&F mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conferming to 53/LBW/61SA/20-21/Q3W-900 54/LBW/61SA/20-21/Q3W-900

S/F mild steel bars TMT 6mm to 8 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conferming to 53/LBW/61SA/20-21/Q3W-700 54/LBW/61SA/20-21/Q3W-700

Ditto but 5 mm over upto and including 10 mm dia in stirrups, spacers and binders.to 8 mm dia , qualtiy conforming to 53/LBW/61SA/20-21/Q3W-300 54/LBW/61SA/20-21/Q3W-300

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat 53/LBW/61SA/20-21/Q3W-65 54/LBW/61SA/20-21/Q3W-65

Fomwork (Flat) to sides of pillar, posts, struds, piers etc complete all as specified. 53/LBW/61SA/20-21/Q3W-60 54/LBW/61SA/20-21/Q3W-60

Formwork (Flat) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter 53/LBW/61SA/20-21/Q3W-20 54/LBW/61SA/20-21/Q3W-20

Formwork (Flat) to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. 53/LBW/61SA/20-21/Q3W-20 54/LBW/61SA/20-21/Q3W-20

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) 53/LBW/61SA/20-21/Q3W-155 54/LBW/61SA/20-21/Q3W-155

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete flat 53/LBW/61SA/20-21/Q3W-70 54/LBW/61SA/20-21/Q3W-70

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) 53/LBW/61SA/20-21/Q3W-185 54/LBW/61SA/20-21/Q3W-185

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling 53/LBW/61SA/20-21/Q3W-65 54/LBW/61SA/20-21/Q3W-65

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. 53/LBW/61SA/20-21/Q3W-210.5 54/LBW/61SA/20-21/Q3W-69.5

Filling under floors or in foundation including watering and consolidation Note:- The soil obtained from excavation (Item No 01) will be used in filling under floor measured. 53/LBW/61SA/20-21/Q3W-15 54/LBW/61SA/20-21/Q3W-15

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point 53/LBW/61SA/20-21/Q3W-53 54/LBW/61SA/20-21/Q3W-52

M&L for Damp proof course to horizontal or vertical surfaces including necessary formwork in cement conc 1:2:4 type B-0 40 mm thick with wpc complete all as specified. 53/LBW/61SA/20-21/Q3W-20 54/LBW/61SA/20-21/Q3W-20

M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate 53/LBW/61SA/20-21/Q3W-60 54/LBW/61SA/20-21/Q3W-60

M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate Finished even & smooth without using extra cement as in sub base to floor 53/LBW/61SA/20-21/Q3W-60 54/LBW/61SA/20-21/Q3W-60

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) 53/LBW/61SA/20-21/Q3W-60 54/LBW/61SA/20-21/Q3W-60

M&L for coloured Glazed ceramic tiles in vertical surfaces 300x200mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick plaster in CM 1:6 53/LBW/61SA/20-21/Q3W-50 54/LBW/61SA/20-21/Q3W-50

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement. 53/LBW/61SA/20-21/Q3W-75 54/LBW/61SA/20-21/Q3W-75

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions 53/LBW/61SA/20-21/Q3W-75 54/LBW/61SA/20-21/Q3W-75

M&L applying one coat of aluminium paint on surface of any description wood,steel,iron, concrete,brick , stone etc exc 10 cm in width or girth, application of paint shall be as per manufacturers instructions. 53/LBW/61SA/20-21/Q3W-75 54/LBW/61SA/20-21/Q3W-75

Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface. 53/LBW/61SA/20-21/Q3W-185 54/LBW/61SA/20-21/Q3W-185

Applying three coats of white wash on new Ceiling surface including preparation of surface. 53/LBW/61SA/20-21/Q3W-65 54/LBW/61SA/20-21/Q3W-65

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and direcrted. 53/LBW/61SA/20-21/Q3W-155 54/LBW/61SA/20-21/Q3W-155

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel. 53/LBW/61SA/20-21/Q3W-24 54/LBW/61SA/20-21/Q3W-24

S&F Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars & similar work conforming to Fe 410-0 or Fe 310-0 53/LBW/61SA/20-21/Q3W-210 54/LBW/61SA/20-21/Q3W-210

S & F 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, complete 53/LBW/61SA/20-21/Q3W-5.5 54/LBW/61SA/20-21/Q3W-5.5

FI hold fast 25x3mm welded to angle iron door frame with nut & bolt / welded to frame as directed. 53/LBW/61SA/20-21/Q3W-12 54/LBW/61SA/20-21/Q3W-12

S&F Steel windows with side hung shutters incl. projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded 53/LBW/61SA/20-21/Q3W-7 54/LBW/61SA/20-21/Q3W-7

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane 53/LBW/61SA/20-21/Q3W-6 54/LBW/61SA/20-21/Q3W-6

S&F Plain framed, panelled shutter 35mm thick (two panel)with lock rail & panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. 2nd Class HW rail & style of size as per IS:1003 (Part I), kiln seasoned & chemically pressure treated 53/LBW/61SA/20-21/Q3W-2.2 54/LBW/61SA/20-21/Q3W-2.2

S&F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate. 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S&F Mild steel barrel tower blots 150mm long, stove enamelled black, with bright bolt. 53/LBW/61SA/20-21/Q3W-10 54/LBW/61SA/20-21/Q3W-10

S&F Mild steel pressed handles 125mm size, oval type,stove enamelled black 53/LBW/61SA/20-21/Q3W-10 54/LBW/61SA/20-21/Q3W-10

S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples 53/LBW/61SA/20-21/Q3W-10 54/LBW/61SA/20-21/Q3W-10

M&L Machine cut kota stone slab 20-25mm thick over cement screed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete 53/LBW/61SA/20-21/Q3W-6 54/LBW/61SA/20-21/Q3W-6

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome 53/LBW/61SA/20-21/Q3W-10 54/LBW/61SA/20-21/Q3W-10

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer 53/LBW/61SA/20-21/Q3W-10 54/LBW/61SA/20-21/Q3W-10

S/F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing 53/LBW/61SA/20-21/Q3W-6 54/LBW/61SA/20-21/Q3W-6

S/F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S/F steel ventilators with top hung shutter including hinges,steel peg stay, complete 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S & F figured glass and glazing with oil putty in square not exc 0.5 sqm in each pane 3mm thick 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S/F aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S/Faluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed,250mm 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F extruded aluminium alloy handles, fabricated type., anodised,150 mm 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S/F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,100mm bore sand cast pipe 53/LBW/61SA/20-21/Q3W-3 54/LBW/61SA/20-21/Q3W-3

S/F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,75 mm bore sand cast pipe 53/LBW/61SA/20-21/Q3W-3 54/LBW/61SA/20-21/Q3W-3

S/F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints,fix to wall,100mm bore sand cast pipe 53/LBW/61SA/20-21/Q3W-3 54/LBW/61SA/20-21/Q3W-3

S/F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix on wall,75 mm bore sand cast pipe 53/LBW/61SA/20-21/Q3W-3 54/LBW/61SA/20-21/Q3W-3

S/F CI Bend 100 mm dia 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F CI Bend 75 mm dia 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F CI 'T' junction 100 mm dia,single 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F CI 'T' junction 75 mm dia,single 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F Cast Iron soil cowl 75 mm dia 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

M/LCast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm dia 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

M/L Salt-glazed stoneware gully traps, square or round mouthed, type `P',100x100mm 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 100 mm pipe 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roo for 75 mm pipe 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe complete 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S & F Vitreous China squatting pan, `Orrisa' pattern, size 630x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

Tubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 15mm bore. 53/LBW/61SA/20-21/Q3W-20 & (External water supply) - 500 54/LBW/61SA/20-21/Q3W-20 & (External water supply) - 125

Tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 20mm bore. Note for Item No 71 & 72 :- GI pipe for External water supply shall also be measured under these item. 53/LBW/61SA/20-21/Q3W-10 & (External water supply) - 230 54/LBW/61SA/20-21/Q3W-10

S/F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I - Capacity 1000 Litre 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F brass CP Angle stop cock fancy type concealled type long body,15 mm bore 53/LBW/61SA/20-21/Q3W -2 54/LBW/61SA/20-21/Q3W-2

S/F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-15mm 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete. 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S/F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed - 15mm 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and 20mm 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

Supply & fixing Vireous China valveless, syphonic action type, flushing cisten low level, white, with inlet, ball valve,float and handle including brackets capacity 10 ltr 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S/F PVC connections 15mm size with PTMT nuts of length 300mm 53/LBW/61SA/20-21/Q3W-4 54/LBW/61SA/20-21/Q3W-4

S/F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed- 20mm 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

M&L 60mm thick coloured interlocking PCC tiles in approved design/colour set and jointed over and including 25mm thick coarse sand laid over sub base all as as spd and directed,. 53/LBW/61SA/20-21/Q3W-200 54/LBW/61SA/20-21/Q3W-150

M & L Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface 53/LBW/61SA/20-21/Q3W-17.60 54/LBW/61SA/20-21/Q3W-15

M&L plain cement concrete type C-1 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 50 mm thick finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar 53/LBW/61SA/20-21/Q3W-35 54/LBW/61SA/20-21/Q3W-35

M&L 100mm thick PCC 1:4:8 type (using 40mm graded stone agg) as in sub base all as as spd and directed,. 53/LBW/61SA/20-21/Q3W-200 54/LBW/61SA/20-21/Q3W-150

Supplying only Integral waterproofing compound 53/LBW/61SA/20-21/Q3W-50 54/LBW/61SA/20-21/Q3W-50

Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore 53/LBW/61SA/20-21/Q3W-34 54/LBW/61SA/20-21/Q3W-34

M/L for SWG Drain pipe 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified. (excavation, earth work and concrete bed and haunching shall be measured and paid for separately) 53/LBW/61SA/20-21/Q3W-35 54/LBW/61SA/20-21/Q3W-35

M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channels and drains all as specified 53/LBW/61SA/20-21/Q3W-0.2 54/LBW/61SA/20-21/Q3W-0.2

Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified. 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

Add or deduct from above ser item No (91) as above for each 25mm girth of part of thereof over 30mm 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

M/L for sand stone slabs on manhole covers ,landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and in cement mortar 1:4, complete,5 cm thick 53/LBW/61SA/20-21/Q3W-4.5 54/LBW/61SA/20-21/Q3W-4.5

Construction of 380 mm thick stone masonry Soakage wells of size 2.4 M dia x 3.0 M in deep complete all as specified and shown in sketch 'A' attached at serial page no 140 and directed by Engr-in-Charge. Note :- Sketch 'A' shall be read in reference with this items and it shall be deemed that unit rate are quoted accordingly. 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators piano type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings Make- Havells(std)/Bonton/Polycab/HPL

One light/fan/ bell point controlled by one, one way switch. 53/LBW/61SA/20-21/Q3W-23 54/LBW/61SA/20-21/Q3W-23

One 3 pin 5 Amp socket outlet on independent board with other switches. 53/LBW/61SA/20-21/Q3W-8 54/LBW/61SA/20-21/Q3W-8

One three pin 5 Amp socket on same board with other switches. 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

All as per Item No 95 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 53/LBW/61SA/20-21/Q3W-3 54/LBW/61SA/20-21/Q3W-3

S&F switch, piano type 230/250 volts (Make ; Anchor or equivelent model in kinjal/bajaj/Phillips)

(a) Single pole, one way 5 Amp rating 53/LBW/61SA/20-21/Q3W-33 54/LBW/61SA/20-21/Q3W-33

(b) Single pole, one way 15 Amp rating 53/LBW/61SA/20-21/Q3W-3 54/LBW/61SA/20-21/Q3W-3

S&F Socket, piano type 230/250 volts :- make: Anchor/kinjal/bajaj

(a) Socket 05 Amp rating Make- Anchor Cat pt No-14304 53/LBW/61SA/20-21/Q3W-10 54/LBW/61SA/20-21/Q3W-10

(b) Socket 15 Amp rating 53/LBW/61SA/20-21/Q3W-3 54/LBW/61SA/20-21/Q3W-3

M&L Ceiling rose surface bakelite 65x50mm, three terminals.Make Anchor/Legrand/Crabtree 53/LBW/61SA/20-21/Q3W-12 54/LBW/61SA/20-21/Q3W-12

Supply & fix BATTEN, LED Light fittings 1 x 20 W ,240 volt( size-4 feet/1136 mm) long life, surface/wall mounting IP 20, luminaire per watt (Minium) extruded alluminium housing with frosted PMMA diffuser with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Siska CAT part No SSK-T5-22W or equivelent model in Bajaj/Wipro/ Philips/CG /Surya roshni 53/LBW/61SA/20-21/Q3W-8 54/LBW/61SA/20-21/Q3W-8

Supply & fixing Energy saving new generation 9 W CFL IP -65 Bulkhead luminare with opal diffuser complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

Supply & fix Decorative wall mounting fixture with frosted made up of polycarbonate suitable for 10W LED Lamp B-22 lamp complete including 10 W LED bulb and with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

Supply & fix Exhaust fan 300 mm sweep matel body with louvers complete all as specified and directed 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

Supply & fixing Mirror surface mounted LED fitting 14 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton cat pt No- LCL-14-CDL or equivelent model in Bajaj/Havells/ Philips/Wipro/Siska /Shakti fixture 53/LBW/61SA/20-21/Q3W-2 54/LBW/61SA/20-21/Q3W-2

S &F ceiling fan 1200 mm sweep complet 5 star rating all as specified and directed Make: Havells Model NO ES-40, khaitan, Usha 53/LBW/61SA/20-21/Q3W-4 54/LBW/61SA/20-21/Q3W-4

S&F Water heater storage type electric single phase of capacity 50 Litre complete vertical type with fixing arrangement incl groutiting of nut bolt, washers etc all as specified and directed Make Havelss, Model No Monza EC 50 or equivalent in Bajaj/Crompton/Usha 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S&F factory made, sheet distribution boards, SP&N12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating :- 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

S&F MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

(a) SP 5 to 32 amps 53/LBW/61SA/20-21/Q3W-10 54/LBW/61SA/20-21/Q3W-10

(b) SPN 32 to 63 amps. 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 32 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge . ( Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner). 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W- 1

Supply and Fixing security lights LED 45 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniformlight spread cames LED technology of Britelite. including bracket made out of suitable size of GI medium grade tubing and fixed with clamps nuts and bolts, washer complete all as specified . Make- CG cat Pt No-LSTS-45-CDL or equivalant in HAVELLS ,Syska and Phillips 53/LBW/61SA/20-21/Q3W-4 54/LBW/61SA/20-21/Q3W-4

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 16 sqmm, 2 core . 53/LBW/61SA/20-21/Q3W-150 54/LBW/61SA/20-21/Q3W-170

M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover. 53/LBW/61SA/20-21/Q3W-10 54/LBW/61SA/20-21/Q3W-11

M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm as directed by Engineer in-charge 53/LBW/61SA/20-21/Q3W-1 54/LBW/61SA/20-21/Q3W-1.2

S&F Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 15mm bore pipe. 53/LBW/61SA/20-21/Q3W- 01 54/LBW/61SA/20-21/Q3W- 01

Cutting existing DI/GI pipe line of size 100/80/50mm bore and insertion of new saddle piece of suitable size complete earth work all as specified and directed by Engineer-in-Charge. 53/LBW/61SA/20-21/Q3W- 01 54/LBW/61SA/20-21/Q3W- 01

Material and labour for cutting of bituminous road/floor for laying of pipe/cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling with material and watering well ramming/compacting and making good with PCC 1:2:4 type B-1, 100mm thick complete all as specified and directed by Engr-in-charge. 53/LBW/61SA/20-21/Q3W- 05

M/s Baghla trading company

M/S Chandra Mohan Bansal

Sh. Manoj Nagar

Shiv Construction Company

M/S ROHIT CONSTRUCTION

M/S Dinesh Chandra Mittal