PROVN OF SHED FOR CASES OF SORTS AT 38 COY ASC SUP TYPE A AND CERTAIN OTHER SANCTIONED WORKS UNDER AGE B/R-II OF GE JHANSI

Amount

B&R WORKS

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation manholes,etc. and n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified

Excavation over areas not exc. 1.5m deep in any type of soil and getting out, complete all as specified & directed.

Excavation over areas exc 1.5 m and not exc. 3.0 m deep in any type of soil and getting out, complete all as specified & directed.

Excavation over areas exc 3.00 and not exc. 4.5m deep in any type of soil and getting out, complete all as specified & directed.

Excavation in post holes (or similar holes) each n.exc 0.5cu m, getting out,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in Hard and Dense soil

Surface dressing n exc15 cm deep in Hard / dense Soil

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard dence soil complete all as specified and directed

Returning filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated material to a distance exceeding 50 meter upto 250mtr and deposited where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.

Filling under floor and spreading in layers including well ramming ,watering as required(Soil reused from Sl Item No1 as above)

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc.

M&L Hardcore (Broken stone) of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified

M & L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in foundation and mass concreting complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), as in sub base complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 2 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. {Note:-Rate is deemed to be inclusive of materials against forming & filling of joints }

M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) as in bed block for hold fast, levelling course etc for complete all as specified.

M&L for cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in coping, benching,cills, seismic band , stops to interlocking and suacer drain includes haunching and the like including weathering, slightly rounded or chamfered angles and throating including neccessary form work etc complete all as specified.

M&L for mild steel hold fast ,clamp,hook & stay and similar small articles conforming to Fe-290 Gde-165, complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in lintels,cover slab for manhole, shelf etc set in CM 1;4 complete all as specified.

M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) complete all as specified and directed.

M&L 75 mm thick cement concrete type C1 1:3:6 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and directed by Engr in charge

M&L 75 mm PCC type B-1, 1:2:4 (20 mm graded aggregate) as in hardstanding finished even and smooth without using extra cement in panels as per PS Clause complete all as specified and directed

M&L for Coloured Glazed ceramic tiles 300x 450 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10mm thick redering in CM 1:4 on wall complete all as specified and directed.

M&L for non skid colour ceramic tile 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed or bedding layer of 15 mm thick, in CM 1:6.

M&L flor Jointless Non-skid cermaic tiles 7 to 8mm thick (squre/rectanglar) are of ech tiles 600mmX600mm, in each floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.complete all as specified and directed.

All as per item 26 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4, complete all as directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 25mm thick sand cushioning, including rendering in CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate.

M& L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area

M& L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M& L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M& L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M& L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M & L for RCC 1:1.5:3 (nominal mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC 1:1.5:3 (nominal mix) using 20mm graded aggregates as in column ,pillars, piers, post complete all as specified and directed.

M & L for RCC 1:1.5:3 (nominal mix) using 20mm graded aggregates as in beams, lintel exc 1.5m , cantilevers, bressummers etc complete all as specified and directed.

M & L for RCC 1:1.5:3 (nominal mix) using 20mm graded aggregates as in chajjas etc complete all as specified and directed.

M & L for RCC 1:1.5:3 (nominal mix) using 20mm graded aggregates as in slab supported on walls complete all as specified and directed.

Form work to soffits of chajja and similar work including edges complete for rough finished surface all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surface complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc complete for rough finished surface all as specified and directed.

Form work to soffits of suspended slabs such as floor slab, roof slab ,landing slab and similar work n exc 200mm thick including edges complete for rough finished surfaceall as specified and directed.

M&L for mild steel deformed TMT bars 10mm dia and over (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No 44 herein before but 5 mm dia to 10 mm dia

All as per item No 45 herein before but as in spacers and stirrups etc.

M/L for brick work with fly ash old size bricks straight or curved on a plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M/L for brick work with fly ash old size bricks straight or curved on a plan to any radius in half brick thick wall built in CM (1:4) including WPC as per manufacturer instruction complete all as specified and directed.

M&L for brick work with sub class 'B' bricks in one brick thick honey comb work, built in cement mortar 1:4 complete all as specified and directed.

M&L for Granite 18/20 mm thick(table rubbed and polished and over including 15mm thick screed bed in CM 1:6 as in window cills, counter shelf and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including edge moulding complete all as specified and as directed.

M&L for rounding to edge of stone slab such as in steps, cooking platform and other similar situation complete all as specified and directed.

S&F Box type steel windows with 80x40x1.25mm RHS frame with side hung shutters (double shutters for glass and gauze) with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed by the Engineer-in-Charge

S&F Box type steel Ventulators with 80x40x1.25mm RHS frame with side hung shutters for glass and gauze with out sash bars jointed together with and including grills using 12mm square bars @ 10cm C/C Ref TD No CEBZ/TD/14/ 2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded complete all as specified and as directed by the Engineer-in-Charge

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe410-S complete all as specified and as directed by the Engineer-in-Charge

S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed.

S/F 100 mm butt hinges medium weight cold rolled mixed steel.

S/F 200mm mild steel barrel tower bolt stove enameled black.

S/F 125 mm mild steel pressed handles over type stove enameled.

S/F mild steel sliding door bolts 300mm plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed including hacking out old glass.

S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

S&F powder coated/anodised aluminium frame for door, windows,ventulators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated/anodised aluminium door shutter weighing 0.55 kg/m including necessary jointing cleat,glazing clips, rubber neoprene packing , handle 2 Nos in each doors, hinges anodised aluminium snap beading with one or more rebates including screws etccomplete all as specified.

S & F powder coated/aluminium anodised window/ventilater shutter with side hung or sliding type, aluminium section weighing @ 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in each , hinges/Sliding, arrangement anodised aluminium snap beading screws etc. complete all as specified and as directed.

S & F powder coated/aluminium anodised door/window shutter fixed type with out sash bar, aluminium section @ 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene paking,hinges, anodised aluminium snap beading screws etc. complete all as specified and as directed.

M&L for Aluminium Decco grills of thickness n. less than 5.6 mm and wt n. less than 2.4 Kg/Sqm, all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F for stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

M & L for 6.3 mm thick coloured sheet glass, ordinary quality and 50micron solar control film fixed on glass joining cleats, glazing clipsy in square exc. 0.50 sqm in each pane.

S & F 150mm long floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed.

S&F of 150mm aluminum handle cast type anodized complete all specified and directed.

M&L for stainless steel curtain rod 25mm dia with caps/lobs and wall mounting bracket cutting in to length required at site complete all as specified and directed by Eng-In-Charge

S&F of 125 to 175mm Hat pegs and hook of aluminum body cast type anodized complete all specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and smooth without using extra cement complete all as specified and as directed.

M&L for rendering in two layers consist of 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces for rough finish over 5mm thick on fair faces of plastered surfaces in cement mortar 1:4 with water proofing compound finished fair and even without using extra cement complete all as specified and as directed.Note: water proofing compound shall be measured seprately.

Forming grooves of uniform size 15mm wide and 15mm in top layer of plaster in place of joints of RCC and Brick masonary using wooden patterns , nailed to the under layer including removal of wooden battens, repair to the edge of grooves and finishing complete all as specified and directed by Engr in charge

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6(internal ) finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed..

Supply only integral liquid water proofing compound ISI marked.

M&L for preparation of new plastered surfaces of walls and applying two coats of weather coat(antifungal paint) over one coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of Cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of new surface by brushing, washing, rubbing down and applying two coats of oil bound distemper over and over a coat of primer incl one layer of Birla/JK White wall care putty to get level and smooth plastered surface of internal wall, complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S&F 15mm bore concealed stop cock fancy type with long shank and cup screwed down high pressure with crutch or butterfly handle screwed for iron pope or union complete all as specifed and directed

S&F for 15 mm bore concealed stop/angle cock CP fancy type with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed

S&F 15mm bore long body bib tap fancy cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule

S & F 15mm dia pillar taps cast copper alloy type

S&F Vitreous China wash basin, white flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets.

Supply & Fix Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests.

S&F Vitreous China urinal half stall type white (excluding Flushing cistern, flush pipe and waste pipe).

S&F PVC flexible waste pipe suitable for wash hand basin

Supply and fix urinal spreader of CP any color for fixing with 15 mm dia pipe

Supply and fix PVC connection 15 mm size with PTMT nuts of length 450 mm long.

Supply and fix shower rose of PTMT any colour for fixing with 150 mm pipe swivel type fixed to GI pipe

S&F grating square 150 mm size of PTMT (Minimum weight 100 gms)

S&F 32 mm bore waste coupling of PTMT (half of full thread) (Min weight 45 gms each)

S & F bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed.

S&F 75mm bore branch pieces, single (equal or ;unequal) ordinary or inverted (spigot or socket type) or with parallel branches with access door all as directed

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n exec 0.5 sqm in each pane

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection including PTMT float valve 20mm(1 No) and Brass gate valve 20mm(01 No) complete all as specified and directed.

M&L concrete bed to drain pipe for 150 mm dia pipes in PCC (1:4:8) type D2 using 40 mm graded stone aggregate incl packing under and haunching against the sides of pipes after they are laid and tested including provision of 150 mm salt glazed stone ware drain pipes grade A ISI marked laid in trenches and jointed as specified

M&L for 150x150 mm dia salt glazed stoneware gully trap, square or round mounted, type "P" as specified.

S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F PVC Nahani/ floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.

S&F PVC Gully trap of 125/110 mm outlet, jointing to waste pipe with solvent complete all as specified and directed.

S&F CP Brass Towel Rail 600mm Long fixed with and including chromium plated brass screws

S&F glass wall corner with wall bracket and fixing accessories, complete all as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. Make : Prayag/ Hindware/ Parryware/Cera/Jaquar .

M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats bolt etc, complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based manglore pattern corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed.

fixing only MS steel work for structural steel Fe-410-W(Gde-E-250) quality B for railing with frame with neccessary bearing (framed), and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.

M&L for MS work as in wind ties for roof including securing bolts necessary drilling , bolting etc complete all as specified and directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment inl fabrication FE-410-W(Gde E-250) complete all as specified and directed.

M&L for clearing the top surface of concrete and providing M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions with torch applicationcomplete all as specified and directed by Engineer-in-Charge with following course of description below:- (a)Firstst coat apply Bituminous primer confirming to IS -3384 of 1965 @ 0.4kg /sqm to be applied on prepared roof surface till the surface is properly inpregnated. (b)Second coat of bonding material using blown bitumen confirming to IS-702 of grade 85/25 @ 1.2kg/Sqm (c) Third course of laying of APP based modified polymeric membrane with 100 mm overlap in longitudinal direction , 150mm in tranverse direction and edges to be taken up to vertical wall of 20 cm height inserted into the vertical wall concealed the joint with bitumen sealent . All joints and changes in all direction should be covered with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane . (c) Fourth course of Apply a coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrane.

E&M WORIKS

Material and labour for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:-

One light / ceiling fan / exhaust fan point controlled by one switch

One 6A socket point controlled by one switch on same board

One 6A socket point controlled by one switch on independent board

All as per srl item No 128 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.

Material and labour for Circuit/sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc complete all as specified and directed by Engineer-in-Charge for the following:-. Note: Three runs of copper conductor cable and one run of PVC conduit shall be measured as one unit length.

2 x 6 Sqmm(P+N) + 1 x 6 sqmm(E)

3 x 4 Sqmm(P+N) + 1 x 4 sqmm(E)

Note for Ser Item No. 129.00 to 129.02. (i) Make of wire: Havells / Polycab / KEI / Finolex / Gloster, Make of Conduit : Polycab / Kalinga / Precision / AKG / Atul (ii) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (iii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iv) No cutting shall be done on ceiling for fixing PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion.

Supply and fix Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.

Supply and fix, Socket, two-in-one, 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.

Supply and fix, Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.

Supply and fix Socket, 6 pin, 6/16 Amp, multipurpose, 240 volts, complete all as specified and directed.

Supply and fix, angle holder, metal cased, bakelite body, 240 volts, complete all as specified and directed.

Supply and fix, Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

Supply and fix electronic fan regulator rotary type in 5 steps, 2 module size, 240V, 50Hz complete all as specified and directed

Note for Ser Item No. 131.00 to 137.00 : Make: Havells (Rio) / SSK / GM / Goldmedal / Anchor

Supply and fix 7 W White LED retrofit lamp suitable for B-22 holder base with polycarbonate diffuser and aluminium heat sink complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED batten box type with CRCA sheet steel body pre-wired suitable for and including provision of 1x20 Watt (4 feet) retrofit LED tube with PC body and connecting up with twisted three core flexible copper wire of 0.5sqmm white colour from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix integrated LED batten 9/10 watt, 2 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED bulkhead luminaire in die-cast aluminium alloy body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 55 degree of protection suitable for and including provision of 7W retrofit LED bulb, full white with B22 lamp holder complete all as specified and directed by Engineer-in-Charge

Supply and fix in replacement of recessed mounted LED panel light 2'x2' size, 36 watts, full white with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for Amstrong / grid false ceiling complete fix fixing accessories complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED building security light fitting 25 watts with high efficiency long life LEDs with In-built electronic driver complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx5mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable 0.5 sqmm white colour from ceiling rose to connector of fitting complete all as specified and as directed by Engineer-in-Charge.

Note for Ser Item No. 139.00 to 144.00 : Make: Havells / Bajaj / Wipro / Philips / Luker

Supply and fix MCB distribution board, TPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separately.

All as per srl item No. 146 here-in-before but SPN 08 way.

All as per srl item No. 146 here-in-before but SPN 04 way.

Supply and fix MCB TPN 63 Amp, 10 KA, 'C' curve, 430 V, 50 Hz.

Supply and fix MCB SPN 40 Amp, 10 KA, 'C' curve, 230 V, 50 Hz.

Supply and fix MCB SP 6-32 Amp, 10 KA, 'C' curve, 230 V, 50 Hz.

Supply and fix in replacement of modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.

Note for Ser Item No. 146.00 to 152.00 : Make: Havells / Indo Asian / L&T / Schneider / Legrand

Supply and fix exhaust fan, 300mm sweep with 04 Nos of blade leafs, 70 W power consumption, 1300 to1400 RPM, 100 % copper winding heavy duty motor with double ball bearings including supply and fixining of metallic louvers and connecting up with 3 core x 0.5 sqmm flexible copper conductor cable from ceiling rose to connector of fan complete all as specified and directed by Engineer-in-Charge. Make: Crompton / Khaithan/ Usha / Bajaj / Almonard

Supply and fix ceiling fan, 1200mm sweep, 3 blade, white colour, energy efficient, 50W / 52W power consumption, with minimum 310 RPM, 100% copper winding motor with and including down rod, canopy (02 Nos), GI fan clamp with rubber bush, GI nuts, bolts and split pins etc (without regulator) and connecting up with 3 core x 0.5 sqmm flexible copper conductor cable from ceiling rose to connector of fan complete all as specified and directed by Engineer-in-Charge. Make: Crompton / Khaithan/ Usha / Bajaj

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 16 sq. mm nominal cross section, 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed by Engineer-in-Charge for following sizes:- Make: Polycab / Gloster / Universal / Havells / KEI

16 Sqmm, 4 Core

10 Sqmm, 2 Core

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. Make: Finolex / Kisan / Prince / Tirupati /Supreme / Jain Irrigation Sys

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of cable / GI Pipe and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for cutting of existing road / hard standing up to 15 cm depth for laying of pipe lines and making good the disturbed surfaces by providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) after laying of pipes lines and returning filling of soil, complete all as specified and directed. Note:- Excavation and earth work below road / hard standing will be measured and paid under relevant items.

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, protection pipe, earth wire up to 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

Material and labour for GI water tubing 25 mm bore, medium grade, ISI marked, with and including all fittings i.e. socket, elbow, tee, bend, reducer, union, nipple etc, laid in trenches / floors / fixed to walls etc complete as specified and directed by Engineer-in-Charge. Make : Tata / Jindal / Prakash Surya / Zenith / Swastik

Supply and fix Gun-Metal, gate valves with iron wheel head, screwed both ends for iron pipe of size 25mm and fixed complete all as specified and directed by Engineer-in-Charge. Make : Zoloto/Leader/Neta/Sant

Cutting and screwing of existing steel tubing for alteration or addition of size 40 or 50 mm done in position without taking down and inserting tee branch connection complete all specified and directed by Engineer-in-Charge.

M/S RAJ CONSTRUCTION AND ELECTRICAL

M/s JS Constructions

M/s Jagdish Chandra Arora

RAM SARAN SAHU

M/S Kesav Dev Agarwal