COMPREHENSIVE MAINT TO MD ACCN AND OTM ACCN IN POCKET 9 (SAHARANPUR) AGE B/R-III UNDER GE ROORKEE

Amount

Taking up or down Steel Tubing 15mm bore (dia) and connections complete all as specified and directed.

Taking up or down Steel Tubing 20mm bore (dia) and connections complete all as specified and directed.

M&L 15mm dia bore steel tubing medium ISI marked grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20mm dia bore steel tubing medium grade ISI marked galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15mm bore fancy type CP brass one way or two way Bib Cock long body (Foam Flow) with Flange (as approved) complete all as specifed and directed.

S&F in repair PVC connection, heavy duty 15 mm bore, 60 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.

S&F in repair new flxible PVC waste pipe of 32 mm bore of 750mm/adequate length including one PVC reducer 32mm complete all as specified and directed.

S&F in repair Coloured PVC Cabinet of size 450mm x 300mm x 90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/ Plastic Cleats, complete as all specified and as directed.

S&F in repair Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe and Making Good to Floor/distrubed surfaces complete all as specified and directed.

S&F in repair, White Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and directed.

S&F in repair Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces complete all as specified and directed.

S&F in repairs PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in floor etc 100 mm thick finished even and fair laid in alternate bays, with spike rolling to surfaces or making impression of expended metal whilst the concrete is green complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling, mass concrete and sub base of floor etc complete all as specified and directed.

M&L for 25 mm thick PCC 1:3:6 type B-0 using 12.5mm graded stone aggregate as in levelling course complete all as specified.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in hardstanding, Plinth protection, path etc 75 mm thick finished even and smooth without using extra cement complete with Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, glossy type with grey cement and no pigment laid dry over and including a layer of 25 mm thick sand cushioning complete all as specified and directed.

Dismantling of brick in floor laid dry on flat or on edge as in floor complete all as specified.

M&L for sub class A old size bricks laid on edge in floor, laid dry include for laying on and including 25mm thick layer of sand and pointed with cement mortar 1:3 complete all as specified and directed.

Ditto all as above but laid dry

M&L for resecuring or easing of door/window shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operation in all respects complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but n. exceeding 4 Sqm each complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n. exceeding 1.5 Sqm each complete of any description all as specified and directed.

Dismantling of wrought Iron or mild steel work of any description not otherwise provided for such as wind ties, valley gutter, supports steel windows, door etc complete all as specified and directed.

S&F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc ccomplete all as specified and directed.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S&F factory made Flush shutters, solid core construction 35mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed.

S&F 35 mm thick IInd class HW Factory Made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.

S&F Framed work as in doors or gates of angle or other section with gusset plates, grill, grating, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 (Gde E-165) complete all as specified and directed.

M&L for PCC (1:3:6) type C1 as in bed blocks for hold fast including necessary formwork complete all as specified and directed.

S&F for 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 150 mm size Aluminium anodised handles cast type, complete all as specified and directed.

S&F for mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F for mild steel sliding door bolts, 300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F for 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.

S&F for SS steel wire mess 0.36mm nominal dia of wire and average width of appearature 1.4mm fixed with tinned tack or galvanised wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling asbestos cement corrugated, semi corrugated, ridge etc sheets in roof covering complete all as specified and directed.

Dismantling plain of steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Fixing only old AC, corrugated or semi corugated sheets in roof wall etc fixed with L-type or J-type or cranked hookbolts complete all as specified and as directed.

M&L for 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridge, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complet all as specified and as directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, valley gutter, drip/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling timber fillets, posts, Rafter, purlins etc. under 40 sq cm in section complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

M&L for Second class hard wood clean sawn in scantlings fixed in unframed work complete all as specified and directed

S&F mild steel (structural work) Rolled sections as in main beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to IS.1161-1979 grade St-240 complete all as specified and directed

Taking down wall/ceiling boards Asbestos plywood of any thickness incluing cover fillets complete all as specified and directed.

S&F for powder coated ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm , cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F of 4 mm thick everest designer ceiling (E- board clasic) board/tiles for insulation and acoustic purpose 595 x 595 mm size fixed with steples on snap grid as in ceiling complete all as specified and directed

Dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

M&L for coloured chequered cement tiles 30cm x 30cm x 30mm thick over 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set with grey cement and pigment, jointed and pointed in neat cement complete all as specified and directed.

M&L for Coloured heavy duty parking tiles tiles 10 mm thick area of each tile exceeding 0.09 sqm and not exc 0.18 sqm, in floors etc. including 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for light colour (Digital colour) Vitrified Ceramic tiles 10 mm hick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade incl 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Coloured (Digital colour) Non skid ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm and not exc 0.18 sqm, in floors etc. including 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 1000 ltrs including GI tank nipple of size 20/15 mm dia complete all as specified and directed.

M&L for white color rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of the tank 500 ltrs including GI tank nipple of size 20/15 mm dia complete all as specified and directed.

Dismentling of old water tank of any size and type complete all as specified and directed

Demolition of brick bats any type any size complete all as specified and directed

Materials and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6 complete all as specified and directed.

All as per item 65 here-in-above but except bricks complete all as directed. (Note :- Serviceable bricks obtained from demolition here-in-before shall be reused)

Taking down cement plaster on brick or concrete walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or on stone masonry surfaces and finished even and fair without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick/concrete work surfaces finished even and fair complete all as specified and directed.

M&L for Three coat of white wash on wall including preparation of new plastered surfaces complete all as specified and directed.

Dismentling of stone slab any type complete all as specified and directed

M&L for machine cut kota stone slab flooring 18-20mm thick over 15 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, complete all as specifed and directed complete all as specified and directed

M&L for Kota stone slab 18-20 mm thick in skirting, etc over 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, complete all as specifed and directed.

M&L for Granite (of any type) 20mm thick machine cut,over 20 mm thick cement screed (1:6) base laid, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed.

S&F in repair ball valves of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and directed

S&F in repairs brass chromium plated bib tap long body for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure with flange complete all as specified and directed

S&F in repair Curtain rod Stainless steel fancy type curtain rod 20 mm dia incl Brackets and knobs complete all as specified and directed.

S&F in repair wall mixer with 3 in 1 (Provision for over head shower and hand shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs health faucet with (1.5 Mtr tube & hooks) complete all as specified and directed.

S&F in repairs Jet Spray with (1.5 Mtr tube) complete all as specified and directed.

S&F in repair Brass CP wash hand basin mixer incl copper nipple for connecting with PVC connection 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs door closer hydraulically regulated designation no. 1 universal type, suitable for door shutters upto 700mm in widht and of weight between 61 to 80 Kg and fixed complete all as specified and directed

S&F in repair stop/Angle Cock fancy type, chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, new or old, any desciption and girth, not otherwise described and treated with two coat of creosote oil all as described complete all as specified and directed

S&F windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM) and Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12 mm and section for shutter should be of 52x25mm, Outer frame & mullion sections to have rebate for glazed shutters. Fly mesh with 20 mm GI flate beading for provision of guard bars/grill. Flymesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2 nos of heavy duty stainless steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and SS mesh for fly mesh shutter with 0.36 mm dia of wire and 1.4 mm aperture. Rubber Gaskets are provided all around the glass. The above frame should be fixed to the concrete/masonry wall by means of self expanding screws. Including 12mm square guard bars with 110mm spacing c/c (Horizontal bay) to be welded on FI 20x6mm alaround except runner portion complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M/S GIRI CONSTRUCTION CO. (BID ID -3313600)

SR CONSTRUCTIONS (BID ID -3308258)

JBN CONSTRUCTION (BID ID -3304002)

BHAGAT JI ENTERPRISES (BID ID -3313977)

Alankar Traders (BID ID -3313708)

AMARJEET SINGH AND CO. (BID ID -3308309)