Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹31.4 L+₹2.7 L (9.27%)Rejected-Finance | L2 | Rejected-Finance Other than lowest quoted | |
| 3 | L3₹32.4 L+₹3.7 L (12.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest quoted | |
| 4 | L4₹32.8 L+₹4.1 L (14.3%)Rejected-Finance VILL MAHULLYA PS PATAN NAWA KHAS DIST PALAMU JHARKHAND 822123 | NAWA KHAS | PALAMU | JHARKHAND | 822123 | L4 | Rejected-Finance Other than lowest quoted | |
| 5 | L5₹33.9 L+₹5.2 L (18.2%)Rejected-Finance | L5 | Rejected-Finance Other than lowest quoted |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
3 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Sahil Ratusaria, IDSE
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
WELCOME MAINT AND CERTAIN REPAIR/ REPLACEMENT WORKS IN OFFRS JCOs AND OR MD ACCN IN NAMKUM KHOJATOLI POCKET UNDER GE RANCHI
2024_MES_658238_1
8200/1557/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Ranchi, 7th Club Road Ranchi, PI
Class D Cat a (i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹60,000
Yes
2 Sept 2024
7 Jun 2024
5 Jul 2024
8 Jun 2024
3 Jul 2024
21 Jun 2024
Amount
M & L for preparing old plastered surfaces of wall and and applying one coat of distemper oil emulsion, white or tinted complete all as specified and directed.
All as per ser item No 1 above but on ceiling
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete all as specified and as directed.
M & L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as specified and directed
M&L complete removal of existing treatmemt and finishing the surfaces of wall with two coats of cement base paint of, any colour, complete all as specified and directed.
M&L preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.
All as per Ser item No 6 above, but applying two coat of synthetic enamel paint white or tinted complete all as specified and as directed.
M&L preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed.
Refixing shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.
Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets.
M&L for providing aluminium snap Grid frame work for false ceiling with of size 595X595 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX36.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mmdia MS wire, J bolts, nuts and washers as per manufacturer's complete all as specified and directed.
M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.
Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed.
M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified and as directed
All as per item No 14 above, but except bricks
Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed.
M&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and as directed.
M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.
M&L prepration of newely plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.
M & L taking down shutter of any description, area n exc 1 Sqm each for repairing the steel windows in any position by replacing the projecting type hinges (Single pane) welding the new hinge and refixing the shutter including applying two coats of synthetic enamel paint over a coat of primer and making the surfaces good including all necessary scaffolding arrangments at any height upto four story all as directed .
S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed.
S&F 2nd class hardwood plain fillets, square, rectangular or rectangular in section, clean sawn secured with nails sectional area n exc 3 Sqcm complete all as specified and directed.
Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed.
S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane.
Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.
S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and directed.
S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 .
S&F 1.00mm thick Mild steel, plain, black sheet in covering to door shutters covering to door chowkats (frames) cut to size edges beaded if directed, holes punched incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd complete all as specified and directed.
M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete all as specified and directed.
M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed.
M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair complete all as specified and directed.
M&L cement concrete type E-2 (1:5:10) using 40mm graded aggregate as in sunken portion of toilets
M&L rendering 15mm thick in cement mortar 1:4 with water proofing compound 2% by wt of cement, finished even and smooth without using extra cement in sunken portion complete all as specified. Note:- WPC shall be measured and paid separately
Supply only integral water proofing compound.
S&F in repairs IVC hand shower (Health faucet) with 8mm dia, 01 (one) metre long PVC tube and wall hook with plastic body complete all as specified & directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.
S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .
S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed both ends for or iron pipe or for unions and fixed complete all as specified and directed
All as per item No 41 above but two way angle cock
S&F in repairs15mm dia pillar tap cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed
S&F in repair 15mm dia central hole basin mixer with U shaped round cated spout with 450mm long braided hoses (hot & cold) complete all as specified and directed.
S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed
S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling
S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)
S&F in repair CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed
S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete of make-Parryware-slimline/ Commander-water bird
S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour.
S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.
S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete all as specified and directed.
S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)
M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar
S&F cast brass fanlight pivot with plate size 25mmx65mm and suitable for shutter of 35mm thick complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples
M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work.
S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete all as specified and directed.
S&F 4.00 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete all as specified and directed.
S&F 4 lever brass mortice lock vertical type size 65mm long complete all as specified and directed.
Taking down aluminium doors shutters only (area exc 1.0 sqm but not exc 2.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed.
S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as a approved and fixed to rackets all as specified and directed.
S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design complete all as specified and directed.
Dismantling floor , hearth or wall tiling includiing cement mortar bedding , removing serviceable tiles to store and rubbish off the premises
M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed with white or coloured cement slurry white or coloured cement. Complete all as specified and as directed.
M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
M&L Non skid coloured Jointfree tiles 7-8 mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm, on vertical surface such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.
M&L vitrified coloured ceramic tiles 10 mm thick (square or rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc over and including 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.
All as per Item No 71 above but as in Skirting with 10mm thick rendering in CM 1:3, Complete all as specified and as directed.
M&L 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified & directed.
Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore.
Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore.
All as per Item no 76 but here in for 20mm outer dia
M/S AMOD KUMAR PANDEY
Barehar Construction Pvt Ltd
M/S ANUJ KUMAR
JAYSHREE ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .