REPAIR MAINT OF STEEL FURNITURE INCLUDING PAINTING AND POLISHING AT AF STN MEMAURA

Amount

Taking out all old U/S material (Nylon Newar/Plywood) from Charpoy GI pipe and cleaning of dust, wax, grease and replacing the damaged legs/short rails and elbow etc and making good the frame duly tightening all the loose joints of legs/long/short rails and make good the frame in original shape complete all as specified and directed.(Drg No FD-220)

Supply only GI Elbow 32mm dia 3 way heavy duty ISI marked (Drg No FD-220)

Supply only check nut 32mm dia heavy duty ISI marked (Drg No FD-220)

Supply only long rail of GI pipe 32mm dia medium grade (Drg No FD-220)

Labour for cutting the long rail in short rail legs size threading and fixing the frame of charpoy GI pipe complete all as specified and directed. (Drg No FD-220)

Supply and fixing 12mm thick ply wood commercial BWP IS 710, 07 ply plywood (Make-Century ply/greenply/archidply) and fixing same with two Nos of flat iron strip of size 900mm x 32mm x 5mm, bolts, nuts and washers, bolts of size 5x65 mm- 10 Nos round head bolts after drilling the three hole of each long rail and drilling the two hole on each short rail including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing including two coat of syntetic enamel paint over a coat of redoxide on the the iron strip complete all as per specified and as direction by EIC. (Drg No FD-220)

Taking out old U/S material from all type of steel table and supply of new top of 18/19mm thick veneered MDF board phenol formal dehyde synthetic resin bonded as approved by Engr-in-Charge and fixing the same by high class furniture cabinet maker including PVC edging of 1.5 mm duly pressed with eddge bending machine on the edges of top all as directed by EIC (Drg No FD-84)

Taking out all old damaged and U/S lever lock from door of Almirah steel large and medium and providing 5 to 7mm brass lever lock with duplicate key Godrej parttern duly tightened with machine screw steel with nuts including welding if required all as directed and specified and shown on drg. (Drg No FD-243 & FD 67)

Taking out all U/S damaged clamps from shelves of Almirah/lockers/cup board boards and S&F new clamps as per old one as required for adjusting the shelves as directed by Engr-in-Charge including two coats of synthetic enamel paint complete all as specified. (Drg No FD-243 & FD 68)

Taking out old U/S damaged handle from Almirah steel large and medium and S&F new one of same length and size and shape chromium plated cast iron handle of Godrej pattern and shall be fitted by using nut and bolts complete all as directed by Engr-in-Charge. (Drg No FD-243 & FD 67)

Taking out old U/S damaged lever lock from drawers and shutter of all type steel table and providing 5 to 7mm brass lock with duplicate key Make Godrej pattern and shall be fitted with machine screw complete all as spcified and directed. (Drg No FD-84)

Repair of drawers of Table steel Clk/Officer by making smooth functioning and painting with OG paint to match with existing surface complete all as directed by Engr-in-Charge. (Drg No FD-84 and FD 84M)

Gas welding with brass rods including preparation of surface by derusting, scrapping and cleaning as required for welding to damaged parts/components of steel surface of furniture article where required to get it serviceable with smooth functioning all as directed by Engr-in-Charge.

Taking out all old U/S materials from seat and back of chair steel varandah cleaning the dust, wax, grease etc from the frame of chair including painting with two coats of synthetic enamelled paint white colour of make- Berger 1st quality all around the frame and recanning with 4 to 5mm wide and 4mm plastic cane in tighten side and 32 to 34 bends on around the frame end recanning with 4 to 5mm weaving side rest all as specified and shown on drg and all as directed by Engr-in-Charge. (FD-256)

Supply and fixing of hand rest of 1st class hard shisham wood duly white painted for chair tube steel varandah all as directed.

Supply & fixing of new rubber shoe/ cap plastic for steel varandah chair.

M&L cleaning, dusting, cobs, grease, wax etc from almirah steel medium with shelves derusted the rusted portion/parts up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge. (FD-67)

All as per item No 17 here in before but almirah steel large with shelves.FD-243

M&L cleaning, dusting etc from chair tube steel with arms derusted the rusted portion/parts of up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge.

All as per item no. 19 here in before but for chair tube steel w/o arms

Taking out unserviceable damaged seat frame from chair tube steel CB with arms and replace the same with new with 1st class hard wood shisham well finish painted with two coats synthetic enamel paint over a coat of pink primer duly caned in Godrej pattern with white colour cane 2.5 mm wide and 0.3 thick & border with 3 to 3.2 mm wide & 0.4mm thick cane half round all as directed by Engineer-in-charge

All as per item no. 21 here in before but for back frame

All as per item no. 21 here in before but for seat frame to chair tube steel w/o arms

All as per item no. 21 here in before but for back frame to chair tube steel w/o arms

Dismantling and re-assembling with new components of the following unserviceable parts/componets of chair revolving steel all as specified by Engr-in-Charge

(a) supply & fixed new seat made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic (range of fabrics not less than Rs 300/Rm)and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.

(b) All as above but back complete.

(c) supply & fixing new arm rest made of polyurethene as per drg

(d) complete pedestle assy as per complete all as per drg and directed.

(e) supplying and fixing new twin wheel castors of required dia complete all as directed.

(f) supply & fix new chrome free cylinder tube shall be fixed complete all as per drg and directed.

(g) Taking out old/un serviceable shifting locking lever assembely and Supply & fix new as shown in drawing complete all as directed.

Dismantling and re-assembling with new components of the following unserviceable parts/componets of chair writing steel all as specified by Engr-in-Charge

(a) Taking out old/unserviceable seat and supply & fixed new seat made of 12mm thick hot pressed plywood with acrylic/poly propylene fabric( range not less than 300/RM) and mouled polyurethene foam 50 mm thick and 50 density with PVC lipping all round complete all as shown on drawing.

(b) All as above but unserviciable back complete.

(c) Taking out old broken/unserviciable arm rest of chair writing steel & supply & fixing new PU arm rest as per drg

(d) Preparation of old painted surface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubular frame of chair writing steel.

(e) Taking out unserviceable/broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC

Teapoy Varandah (Following items) (FD-383/255)

Rubber shoe std quality as per drg

18mm thick Post forming top(PFT) exterior grade ( Make-Century/Greenply/Action tesa) shall be provided on top of teapoy varandah complete.Rest all as per drg

10 mm thick MS bar welded to each leg and one centre stiffner provided including welding works wherever required complete as directed by EIC

Taking out all old U/S PVC seat and back of chair steel varandah MAP cleaning the dust, wax, grease etc from the frame of chair including painting with two coats of synthetic enamelled paint white colour of make- Berger 1st quality all around the frame and S&F PVC seat and Back (make-AMKO/COMFO/Classic/HARMONY)rest all as specified and shown on drg and all as directed by Engr-in-Charge.

Bed hard officers (following items) (Drg No FD-359/MA, P/11/MA and P-II/15)

12 mm thick plywood top BWP grade IS 710, 07 ply (make-Centuryply/ Greenply/ archidply) as per existing shape and size with 8 Nos shunken nut/bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

Hard rubber shoe std quality as per drg

replace particle board of head rest/Foot rest exterior grade with PVC edging complete as per drg.

Rack steel Adj 3/6 tier (following items) (Drg No FD-106)

Welding wherever required as directed by E-in-Incharge

Repairs to shelves include tinkering/denting, welding, etc. all as shown, as specified & as directed

HALLIOX ENTERPRISES

m/s pal associates

Mohit Enterprises

Sheo Prasad

R K GUPTA AND SONS