Repairing and Painting work of Snanagaar at Ahirana under ward-04 zone-04.

Finishing walls with Putty approved brand and manufacture and of required shade on undocorated wall surface to give even shade over inchuading curing and cost of all material. labour, T&P etc required for proper completion of work

Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over (d) 1.25 Ltr 10sqm including one coat of primer applid 0.75L.ir/10sqm coat curing and cost of all material, labour, T&P etc required for proper completion of work for two coat

Supply and fixing of Hem, Internal dia AC. down pipes complete with roseheads, bends MS clamps 2.5cm x 3mm. Fixed to wall by 15cm. Long 6mm dia nails and including repairs of plaster pointing etc if damaged during fixing of the pipes including cost of all materials, labours, tools and plant etc. required for proper completion of wor

Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, Including all CPVC plain & brass threaded fittings. Ve fixing the pipe with clamps at 1.00 mm spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, Including all CPVC plain & brass threaded fittings, Ve fixing the pipe with clamps at 1.00 mm spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing wash basin with C.1 brackets, 15 mm CP. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Mirror of Atul make with indian polish pf 600x450 mm dia size with beveled edge.

cement concrete flooring 124(1 coment 2 course sand 4 gronded shnd with a floating coat of neat cement, Incing cement slurry, but excluding the cost of meeting of steps etc complete 40 mm thick with 20mm nominal size stome aggregate

Apply priming coat over new steel and other mental surface them with youth or wall exceeding 0.10 Sq. M. orea after and Including preparing the surface by thoroughly clearing prente dirt and other foreign matter and seed with wire brushed fow steel wowed Scropper, od papering mad Amitting infading cost of all materials TAP etc required for proper completion of work Painting Ist coat over priming coat (but excluding root of priming coat) ose steef and other metod surfaces apto 10cm width or girth or small articles not excreding 0.10 Sq.M. in area with superior synthetic enamel such as Laool 3. i glass Apcilite, Superloc, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour tools and plants etc required for proper completion of work. Extra over item 2 and 2(a) above but for every coat of point after first coat

Complete Wiring as per requirement

Wiring point for light with 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated bakelite sheet etc, complete in all respect, as directed

Wiring point for fan fresh air fan (light duty exhaust fan) with 1.5 sq.mm. FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect.

Supply and fitting of ceiling fan Usha, Khetan, Bajaj I.S.I mark including all complete.

Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respec

S/F of Exhaust fan with 1.5sq mm FR PVC insulated copper conductor cable in 25mm dia heavy duty etc all compete

S/F of 13watt LED. lighting of approved quality etc all complete. (MR)

Supply fitting of button holder including all complete of work

Supply and fixing of switch bax 250 x 250 x 65 mm size of each approved make made up of 1.0 mm thick ISI Marked G.P sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps. Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of wark as directed at site by the Engineer in charge

Steel work welded in built up sections/framed work, including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings.brackets, gates and similar works

Add 18 % G.S.T.