Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.1 LAccepted-AOC NEAR PAYAL CINEMA P O SEVOKE ROAD SILIGURI 734 001 | DARJEELING | WEST BENGAL | 734001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹49.1 L+₹51,159 (1.05%)Rejected-Finance SIMULBARI T E PO VILL SIMULBARI PS KURSEONG DIST DARJEELING PIN 734009 WEST BENGAL | SIMULBARI | DARJEELING | WEST BENGAL | 734009 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹49.1 L+₹54,564 (1.12%)Rejected-Finance C O BIKASH CHAKRABORTY OPPOSITE GITAM NURSERY SCHOOL NEAR BAGHAJATIN PARK PO SILIGURI DISTT DARJEELING WEST BENGAL 734401 | DARJEELING | WEST BENGAL | 734401 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹49.1 L+₹55,962 (1.15%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹49.3 L+₹76,076 (1.57%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
23 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
REPAIR MAINT OF MOTOR PUMPS WATER HEATING SYSTEM FILTRATION SYSTEM ETC AT SUKNA AREA UNDER GE SUKNA
2024_MES_669820_1
GE Sukna/8701
Open Tender
Civil Works
Works
270 days
Sukna
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹0
₹92,000
Yes
22 Dec 2024
2 Sept 2024
25 Sept 2024
2 Sept 2024
23 Sept 2024
16 Sept 2024
2 Sept 2024 - 23 Sept 2024
Amount
M&L for Taking out complete motor - pump assembly (centrifugal/mono block) of any make and type from foundation of different water supply installation for necessary repair/overhauling of 1HP to 5HP and transporting to workshop and back complete all as specified and as directed.
All as per ser item No. 1 here-in-before but of pump set capacity/rating 7.5HP to 15HP complete all as specified and as directed.
All as per ser item No. 1 here-in-before but of pump set capacity/rating 20HP to 30HP complete all as specified and as directed.
M&L for Carrying out overhauling of pump including replacement of worn out spares, like bearing, impeller, bushing etc. and reusing of existing serviceable components after proper cleaning, machining all required and assembling, testing at workshop complete for 1HP centrifugal/monoblock pump set and spray painting with approved shade synthetic enamel paint complete all as specified and as sirected. Note :- (a) All new spares/ components will be measured and paid separately under respective items. (b) Replacement of bolts/nuts/washers is deemed to be included in the items.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 2HP complete all as specified and as directed.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 3HP complete all as specified and as directed.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 5HP complete all as specified and as directed.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 7.5HP complete all as specified and as directed.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 10 HP complete all as specified and as directed.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 15 HP complete all as specified and as directed.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 20 HP complete all as specified and as directed.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 25 HP complete all as specified and as directed.
All as per ser item No. 4 here-in-before but of pump set capacity/rating 30 HP complete all as specified and as directed.
M&L for Carrying out overhauling of motor assembly, cutting burnt winding wire, cleaning of core slots and re-winding of stater complete as per IS specifications using super enamelled copper winding wire of appropriate gauge and turn as per existing including providing all insulation materials & varnishing heating, replacement of worn out bushing, bearing terminals etc. including lubrication and assemnling the complete motor assembly of centrifugal/monoblock pump set and testing complete for 2 HP moter complete all as specified and as directed.
All as per ser item No. 14 here-in-before but motor capacity/rating 5 HP complete all as specified and as directed.
All as per ser item No. 14 here-in-before but motor capacity/rating 7.5 HP complete all as specified and as directed.
All as per ser item No. 14 here-in-before but motor capacity/rating 15 HP complete all as specified and as directed.
(d). All as per ser item No.14 here-in-before but motor capacity/rating 20 HP complete all as specified and as directed.
(e). All as per ser item No.14 here-in-before but motor capacity/rating 25/30HP complete all as specified and as directed.
(f). All as per ser item No. 14 here-in-before but motor capacity/rating 1HP heating, varnishing only complete all as specified and as directed.
(g). All as per ser item No.14 here-in-before but motor capacity/rating 2HP heating, varnishing only complete all as specified and as directed.
(h). All as per ser item No.14 here-in-before but motor capacity/rating 3HP heating, varnishing only complete all as specified and as directed.
(i). All as per ser item No.14 here-in-before but motor capacity/rating 5HP heating, varnishing only complete all as specified and as directed.
(j). All as per ser item No. 14 here-in-before but motor capacity/rating 7.5HP heating, varnishing only complete all as specified and as directed.
(k). All as per ser item No.14 here-in-before but motor capacity/rating 10HP heating, varnishing only complete all as specified and as directed.
(l). All as per ser item No. 14 here-in-before but motor capacity/rating 20HP heating, varnishing only complete all as specified and as directed.
(m). All as per ser item No. 14 here-in-before but motor capacity/rating 25HP heating, varnishing only complete all as specified and as directed.
(n)All as per ser item No. 14 here-in-before but motor capacity/rating 30HP heating, varnishing only complete all as specified and as directed.
Supply only following items :-
(a).Gland Packing of any size
(b).Hallide sheet 0.5mm to 3.5mm thick
(c). Rubber sheet 2mm to 6mm thick
(d). High Tension Nuts, Bolts & Washers (ISI marked)
(e). Impeller for 2HP Pump
(f). Impeller for 5HP Pump
(g). Impeller for 7.5HP Pump
(h). Impeller for 10HP Pump
(i). Impeller for 15HP Pump
(j). Impeller for 20HP Pump
(k). Impeller for 25HP Pump
(l). Impeller for 30HP Pump
(m). Pump shaft 2HP Pump
(n). Pump shaft 5HP Pump
(o). Pump shaft 7.5HP Pump
(p). Pump shaft 10HP Pump
(q). Pump shaft 15HP Pump
r). Pump shaft 20HP Pump
(s). Pump shaft 25HP Pump
(t). Pump shaft 30HP Pump
(u). Pump Shaft Sleeve bush 2 HP
(v). Pump Shaft Sleeve bush 5 HP
(w). Pump Shaft Sleeve bush 7.5 HP
(x). Pump Shaft Sleeve bush 10 HP
(y). Pump Shaft Sleeve bush 20 HP
(z). Pump Shaft Sleeve bush 25 HP
(aa).Pump Shaft Sleeve bush 30 HP
(ab). Impeller Balancing ring 20 HP
(ac). Impeller Balancing ring 25 HP
(ad). Impeller Balancing ring 30 HP
(ae). Gland Packing sleeve 2 HP
(af). Gland Packing sleeve 5 HP
(ag). Gland Packing sleeve 7.5 HP
(ah). Gland Packing sleeve 10 HP
(ai). Gland Packing Retainer sleeve 20 HP
(aj). Gland Packing Retainer sleeve 25 HP
(ak). Gland Packing Retainer sleeve 30 HP
(al). Pump Casing wear ring 20 HP
(am). Pump Casing wear ring 25 HP
(an). Pump Casing wear ring 30 HP
(ao). DE and NDE bearing for 2 HP Pump
(ap). DE and NDE bearing for 5 HP Pump
(aq). DE and NDE bearing for 7.5 HP Pump
(ar). DE and NDE bearing for 10 HP Pump
(as). DE and NDE bearing for 15 HP Pump
(at). DE and NDE bearing for 20 HP Pump
(au). DE and NDE bearing for 25 HP Pump
(av). DE and NDE bearing for 30 HP Pump
(aw). DE and NDE bearing for 2 HP Motor
(ax). DE and NDE bearing for 5 HP Motor
(ay). DE and NDE bearing for 7.5 HP Motor
(az). DE and NDE bearing for 10 HP Motor
(aaa).DE and NDE bearing for 15 HP Motor
(aab). DE and NDE bearing for 20 HP Motor
(aac). DE and NDE bearing for 25 HP Motor
(aad). DE and NDE bearing for 30 HP Motor
(aae). Motor terminal 3 Pole 2 HP to 5 HP
(aaf). Motor terminal 6 Pole 7.5 HP & 10 HP
(aag). Motor terminal 6 Pole 15 HP & 20 HP
(aah). Motor terminal 6 Pole 25 HP & 30 HP
M&L for Taking up openwell Submersible pump assembly any make/type and capacity 0.5 HP to 5 HP manually from fountain or openwell etc. and transportation to workshop / MES storee for necessary repafir / safe custody and reconnection, commissioning and testing upto the sbtite satisfaction of Engineering-in-Charge including carrying out painting with two coats of synthetic enamelled paint over a coat of primer and assembling pump and motor including testing complete all as specified and as directed.
Dismantling and oerhauling of submersible pump set including cleaning and de-rusting of casing, replacement of worm out spares and refixing of existing serviceable components after proper cleaning, machining all as required and assembling, testing at workshop complete for 0.5 HP to 1.5 HP capacity submersible pump of any type and make complete all as specified and as directed. (Note :- All spared / components shall be measured and paid under relevent items of this schedule)
All as per ser item No. 91 above but o 2HP to 5 HP capacity submersible pump.
M&L for Taking out burnt winding wire from of 0.5 HP to 02 HP submersible motor rewinding using insulated copper winding wire of appropriate gauge and turn, providing insulation materials and replacement of connected accessories and assembling and testing complete all as directed. (Note :- All spared / components shall be measured and paid under relevent items of this schedule)
All as per ser item No. 93 above but o 3HP to 5 HP capacity submersible pump set.
Supply only following items for maintenance of 0.5 HP to 5 HP Submersible pump set.
(a). Impeller for 0.5 HP to 2 HP Pump
(b). Impeller for 3 HP to 5 HP Pump
(c). Bearing/Bush for 0.5 HP to 2 HP Pump
(d). Bearing/Bush for 3 HP to 5 HP Pump
(e). Sleeve for pump shaft for 0.5 HP to 2 HP Pump
(f). Sleeve for pump shaft for 3 HP to 5 HP Pump
M&L for Taking up submersible pump motor assembly any type and capacity including column pipe approximately 30 to 50 m using chain pully block manually and transportation of submersible pump motor assembly to workshop/ MES store for necessary repair / safe custody complete all as specified and as directed.
M&L for Taking up submersible pump motor assembly any type and capacity including column pipe approximately 51 to 90 m using chain pully block manually and transportation of submersible pump motor assembly to workshop/ MES store for necessary repair / safe custody complete all as specified and as directed.
Dismantling and overhauling of multi stage pump, including cleaning and de-rusting of casing, replacement of worn out spares and refixing of existing serviceable components after proper cleaning, machining all as required and assembling, testing at workshop complete for 7.5 HP to 12.5 HP capacity submersible pump of any type and make including carrying out painting two coats of synthetic enamelled paint over a cost of primer complete all as specified and directed. (Note :- All spared / components shall be measured and paid under relevent items of this schedule)
All as per ser item No.104 above but o 15HP to 20 HP capacity submersible pump set.
M&L for Taking out burnt winding wire from submersible motor of capacity 7.5 HP to 12.5 HP, rewindingusing insulated copper winding wire of appropriate gauge and turn, providding insulation materials and replacement of spares and assembling and testing complete all as specified and as directed. (Note :- All spared / components shall be measured and paid under relevent items of this schedule)
All as per ser item No. 106 above but o 15HP to 20 HP capacity submersible pump set.
Supply only following items for maintenance of 7.5 HP to 20 HP Submersible pump set.
(a). Brass impeller for 7.5 HP to 12.5 HP submersible pump.
(b). Brass impeller for 15 HP to 20 HP submersible pump.
(e). Stage casing bush for 7.5 HP to 12.5 HP submersible pump.
(f) . Stage casing bush for 15 HP to 20 HP submersible pump.
(g). Shaft sleeve bush for 7.5 HP to 12.5 HP submersible pump.
(h). Shaft sleeve bush for 15 HP to 20 HP submersible pump.
(i). Suction bush for 7.5 HP to 12.5 HP submersible pump.
(j). Suction bush for 15 HP to 20 HP submersible pump.
(k). Stainless steel pump shaft for 7.5 HP to 12.5 HP submersible pump.
(l). Stainless steel pump shaft for 15 HP to 20 HP submersible pump.
(m). Pump shaft key
(n). stainless steel stud with nut for submersible Pump.
(o). Oilseal for plunger for submersible pump.
(p). Gun metal bush for 7.5 HP To 20 HP submersible.
(q). Thrust bearing carbon for 7.5 HP to 12.5 HP
r). Thrust bearing carbon for 15 HP to 20 HP
(s). Thrust bearing plate for 7.5 HP to 12.5 HP
(t). Thrust bearing plate for 15 HP to 20 HP
(u). Neck ring for 7.5 HP to 12.5 HP
(v). Neck ring for 15 HP to 20 HP
Lowering pump amd motor including column pipe 50 mm / 80 mm bore in the existing bore well upto 30 m to 50 m from ground level by chain pulley, reconnecting the column pipe to the existing rising main and all electrical connection and testing complete all as directed.
Lowering pump amd motor including column pipe 50 mm / 80 mm bore in the existing bore well upto 51 m to 90 m from ground level by chain pulley, reconnecting the column pipe to the existing rising main and all electrical connection and testing complete all as directed.
Supply and laying flat submersible cable into bore hole/over the ground alongwith submersible pump/centrifugal pump sets, PVC insulated weather / water proof with flexible copper conductor 1100 Volt grade of size 10sqmm 3 core (ISI Marked) including necessary jointing materials / kit and connecting with motor and starter terminals and testing complete all as specified and as directed, Make :- Finolex/Havells/RR kable/ Polycab
All as per ser item No. 131 above but of size 6 sqmm 3 core complete all as specified and as directed. Make :- Finolex/Havells/RR kable/ Polycab
All as per ser item No. 131 above but of size 4 sqmm 3 core complete all as specified and as directed. Make :- Finolex/Havells/RR kable/ Polycab
All as per ser item No. 131 above but of size 2.5 sqmm 3 core complete all as specified and as directed. Make :- Finolex/Havells/RR kable/ Polycab
S&F single phase preventor suitable for motor panel including connection & testing complete all as specified and as directed.
S&F rubber coupling suitable for 2 HP & 3 HP capacity centrifugal pump sset complete all as specified and as directed.
S&F rubber coupling suitable for 5 HP & 7.5 HP capacity centrifugal pump sset complete all as specified and as directed.
S&F rubber coupling suitable for 10 HP & 15 HP capacity centrifugal pump sset complete all as specified and as directed.
S&F rubber coupling suitable for 20 HP to 30 HP capacity centrifugal pump sset complete all as specified and as directed.
S&F PVC flexible and stranded copper cable, unsheathed of size 3 core 10 sqmm (ISI Marked) including drawing through PVC flixible conduit, copper lugging to connect panel board (maintainning colour code) to motor as required including testing on completion and taking out old cable complete all as specified and as directed. Make :- Finolex/Havells/RR kable/ Polycab
All as per ser item No. 140 above but of size 6 sqmm complete all as specified and as directed. Make :- Finolex/Havells/RR kable/ Polycab
S&F in repairs Contactor for 7.5 to 12.5 HP Motor Starter complete all as specified and as directed. Make :- L&T/C&S/Siemens/ABB
S&F in repairs Contactor for 15 to 20 HP Motor Starter complete all as specified and as directed. Make :- L&T/C&S/Siemens/ABB
S&F in repairs Contactor for 25 to 30 HP Motor Starter complete all as specified and as directed. Make :- L&T/C&S/Siemens/ABB
S&F in repairs Over load Relay with actual setting for 7.5 to 12.5 HP Motor Starter complete all as specified and as directed. Make :- L&T/C&S/Siemens/ABB
S&F in repairs Over load Relay with actual setting for 15 to 20 HP Motor Starter complete all as specified and as directed. Make :- L&T/C&S/Siemens/ABB
S&F in repairs Over load Relay with actual setting for 25 to 30 HP Motor Starter complete all as specified and as directed. Make :- L&T/C&S/Siemens/ABB
S&F in repairs Direct on Line starter , suitable for 1 to 3 HP centrifugal / monoblock pump set including testing complete all as specified and as directed. Make :- L&T/Siemens/ABB
S&F in repairs Direct on Line starter , suitable for 5 HP centrifugal / monoblock pump set including testing complete all as specified and as directed. Make :- L&T/Siemens/ABB
S&F in repairs Direct on Line starter , suitable for 1 to 3 HP 415V 3 Ph submersible pump set including testing complete all as specified and as directed. Make :- L&T/Siemens/ABB
S&F in repairs Direct on Line starter , suitable for 5 HP 415V 3 Ph submersible pump set including testing complete all as specified and as directed. Make :- L&T/Siemens/ABB
S&F in repairs fully automatic star delta submersible motor starter suotable for 10 HP including testing complete all as specified and as directed. Make :- L&T/Siemens/ABB
S&F in repairs fully automatic star delta centrifugal/monoblock Motor starter suitable for 20 HP motor comolete all as specified and as directed. Make :-L&T/Siemens/ABB
S&F in repairs fully automatic star delta centrifugal/monoblock Motor starter suitable for 30 HP motor comolete all as specified and as directed. Make :- L&T/Siemens/ABB
S&F in repairs change over switch open execution type of capacity 63 Amps four pole with operating handle and suitable for existing panel complete all as specified and as directed. Make :- L&T/Legrand/Siemens/ABB
S&F in repairs change over switch with sheet metal encluosure of capacity 63 Amps four pole with operating handle complete all as specified and as directed. Make :- L&T/Legrand/Siemens/ABB
S&F for Bronze Vertical Check Valve of size 80mm dia Make :- Zoloto/Kirloskar
All as per item No. 157 here -in- before but 100mm dia Make : Zoloto
S&F Pressure booster pump, cap: 1HP single phase Make: KBS or equivelent
S&F and testing of cast iron Non Return Valve bypass arrangment, swing type of size 80mm bore conforming to IS 5312, PN-1.6 flanged ends with nuts, bolts, washers and gasket including taking out unserviceable complete all as specified and as directed. Make :- Kirloskar/Leader/Upadhayaya/Venus
Supply only 80mm bore MS colum pipe 3 mtr long heavy duty wall thick ness 5 to 6 mm , bothe end Thread 8 TPI , pipe should be painted with anticorrosive paint complete all as specified and as directed. Make :- Tata/Jindal/Bansal
Supply only MS Socket heavy duty 125mm Leanth, 8 TPI thread suitable for 80 mm MS solum pipe, socket should be painted with anticorrosive paint complete all as specified and as directed. Make :- Tata/Jindal/Bansal
M&L for Taking out complete motor - pump assembly (centrifugal/mono block) of any make and type from foundation of different water supply installation for necessary repair/overhauling of 60HP and transporting to workshop and back complete all as specified and as directed.
M&L for Carrying out overhauling of 60 HP motor assembly and including rewinding using super enamelled copper winding wire of appropriate gauge as per existing, cutting burnt winding wire, cleaning of core slots, providing all insulation materials and varnishing, heating, replacement of worn out bearing, impeller, bushing complete all as specified and directed. Note :- (i) Rates quoted shall deemed to be include rate of winding wire, insulation material, varnishing, bearing, impeller & bushing etc.
M&L for Taking out carefully complete filter media from the existing filter beds (21,000 Gallons – 02 Nos, 10,000 Gallons – 01 No) and stacking in segregation size/ item wise (viz. gravell/grit/sand) outside the plant house, distance exc 20 m and n.exc 50 m complete all as specified and directed.
M&L for Washing thoroughly the filter media recovered under ser item No. 02 above with lime and bleaching powder solution and rewashing with clear water thoroughly to remove any trace of chemical agents.
Labour only for Screening and segregating of materials recovered from the filter media and throwing away the unserviceable materials to a distance exc 50 m and n.exc 100 m complete all as directed.
M&L for Cleaning of empty filter bed chamber 21,000 gallons capacity - 2 Nos including taking out silt deposit at bottom and cleaning of AC perforated 25 m long pipes fixed at bottom of the filer bed including replacement of broken AC perforated pipe with all necessary fitting as required and directed. Note: AC perforated pipe shall be measured and paid separately.
S&F AC perforated pipe 80 mm bore dia.
Laying of old serviceable filter media obtained under ser item No. 80 above in the existing filter bed of RCC filter as per the following arrangement: (a) 1st layer 2” x 1 ½ gravel = 3”thick (b) 2nd layer 1 ½ x ½” gravel = 3” thick (c) 3rd layer 1/3” x ¼” gravel = 4” thick (d) 4th layer 3/8” x 1/8” gravel = 4” thick (e) 5th layer 1/10” x ¼” gravel = 6” thick (f) 6th layer 16/30 sand = 2’-0” deep Note:- i) After washing filter media, if the quantity decreased or replacemant is required, filling of new filter media shall be measured and paid separately. ii) The above layer of filter media are tentative which may vary as per directive given by Engr- in- Charge.
Supply and lay properly screened cleaned and washed sea gravel of size 2” x 1 ½” (Barakar) complete as specified and directed.
All as per ser item No. 171 above but of size 1 ½” x ½”.
All as per ser item No. 171 above but of size 1/3” x ¼”.
All as per ser item No. 171 above but of size 3/8” x 1/8”.
All as per ser item No. 171 above but of size 1/10" X 1/14".
Taking out filter agents/media carefully from existing MS pressure filter of 35,000 Gallons capacity having filter media 35CUM (Approximate), cleaning thoroughly inner surface of filter 27 Sqm (Approximate) by scrapping and washing with water, removing silt / rust formation / old paint out of the filter & disposing at a distance n exc 50 m screening/segregating serviceable filter media, washing with lime/bleaching powder solution, cleaning, finally washing with clear water and & re-filling the same in filter in accordance as per original layout/arrangement after painting internal surface of tank including filling/laying of new filter media (as required), replacement of damaged PVC strainers and fixing of old serviceable PVC strainers complete all as specified and directed. Note :- Supply of New filter media, Supply of New PVC strainers and M&L for painting work will be measured and paid separately under relevant item
Supply only PVC strainer suitable for MS pressure filter of 35,000 Gallons capacity as per existing complete all as directed. Supply of New filter media, Supply of New PVC strainers and M&L for painting work will be measured and paid separately under relevant item
Supply only 8/12 mesh coarse sand (Barakar), screened & cleaned for pressure filters complete all as directed. Note - Rate
Supply only 16/30 mesh coarse sand (Barakar), screened & cleaned for pressure filters complete all as directed.
M&L for cleaning and removing of settled silt and mud mixed with sand, gravel etc, manually from hopper tank of size 25 x 32 feet (approximate) at top, 4 x 4 feet (approximate) at bottom & 30 feet (approximate) depth and including disposal of debris to a distance n.exc. 100 m, pumping out of stagnated water with suitable pump and scraping of inner surface of the hopper tank by wire brush and removing moss formation, scraping out deposited rust / paint etc. from the channels / pipe fitted inside the hopper tank and preparation of surfaces and applying one coat of drinking water grade water resistance bituminous paint with necessary T&P, as and when required at site complete all as specified and directed.
Cleaning and removing of silt / mud / sand / shingle etc, from the river stream of length 60 m, 1.2 m wide and 1.2 m depth of intake channels to facilitate flow / conveying of water to the desired extent and including disposal of debries to a distance n.exc. 50 m with necessary T&P, as and when required at site complete all as specified and directed.
Cleaning and removing of silt and dense mud clay mixed with sand, shingle, gravel etc, from collector pond of size 11.30 x 5.75 x 3.00 m approximately (cleaning of mud upto 0.5 m depth maximum) and including disposal of debries to a dostance not exc. 250 m and cleaning of choked / partially choked 6 Nos. intake pipes leading to adjacent pre-sedimentation tank with necessary T&P, as and when required at site complete all as specified and directed.
Cleaning and removing of settled silt and dense mud mixed with sand / shingle / gravel etc, from intake tank of size 13.50 x 4.50 x 3.90 m approximately (upto 1.3 m depth maximum) and including disposal of debries to a distance n.exc. 100 m, thorough cleaning and scraping out all moss formation, cleaning the internal surface of reservoir with bleaching powder with necessary T&P, as and when required at site complete all as specified and directed.
All as per Sl. item No. 183 above but from intake tank of size 5.50 x 2.50 x 4.00 m.
Cleaning and removing of mud with sand from 2,50,000 gallons capacity RCC circular sedimentation tank, constructed in two concentric RCC chambers of 1,25,000 Gallons capacity each and including disposal of debris to a distance n.exc. 100 m with necessary T&P, as and when required.
Cleaning and removing of settled silt and mud from existing clarifier set (RCC) 40,000 gallons capacity and including disposal of debris to a distance n.exc. 100 m and thorough cleaning and scrapping out all moss formation and final treatment of the inner surface of the tank with bleaching powder solution with necessary T&P, as and when required at site complete all as specified and directed.
Cleaning and removing of settled silt and mud from existing flocculator set (RCC) 40,000 gallons capacity and including disposal of debris to a distance n.exc. 100 m and thorough cleaning and scrapping out all moss formation and final treatment of the inner surface of the tank with bleaching powder solution with necessary T&P, as and when required at site complete all as specified and directed.
Cleaning and removing of settled silt and mud from existing clear water sump set (RCC) 100000 gallons capacity and including disposal of debris to a distance n.exc. 100 m and thorough cleaning and scrapping out all moss formation and final treatment of the inner surface of the tank with bleaching powder solution with necessary T&P, as and when required at site complete all as specified and directed.
M&L for cleaning of RCC underground water sump of 5000 gallons capacity by pumping out the accumulated water using pumpset and including removing the complete sludge by suction process using either suction pump or vacuum process, cleaning internal surface completely by scraping and washing using high pressure water jet to dislodge all the mud, dirt, algae, fungus and layers of calcinations etc., vacuum cleaning to remove dislodged waste, cleaning with bleaching powder on internal surface of the sump to make it sterilize and take care of any further suspended bacteria, viruses which might have remained in the tank without disturbing the water supply to the area and including painting the details of sump capacity, date of cleaning and due date of cleaning on the sump wall and applying one coat of white wash to entire tank internal and external exposed surfaces complete all as specified and directed.
As as per item No.189 above but 20,000 Gallons capavity.
As as per item No.189 above but 40,000 Gallons capavity.
As as per item No. 189 above but 50,000 Gallons capavity
As as per item No.189 above but 100,000 Gallons capavity
M&L for cleaning of RCC / Steel overhead tank of 40,000/50000 gallons capacity and including cleaning internal surface completely by scraping and washing using high pressure water jet to dislodge all the mud, dirt, algae, fungus and layers of calcinations etc., vacuum cleaning to remove dislodged waste, cleaning with bleaching powder on internal surface of the sump to make it sterilize and take care of any further suspended bacteria, viruses which might have remained in the tank without disturbing the water supply to the area and including painting the details of sump capacity, date of cleaning and due date of cleaning on the sump wall complete all as specified and directed by Engr-in-Charge.
As as per item No.194 above but 75,000 Gallons capavity
As as per item No. 194 above but 1,00,000 Gallons capavity
M&L for painting with supper enameled synthetic paint after scrapping out and prepration of surface of open CI/GI pipeline up to 300,200,150,100,80 mm dia appx 100 RM, and above size of sulice valves appx 15, and metalic parts of sedimentation tank, railling of flacualtor, fire point, In/out get, floculator paddel, 2 x main gate and supporting including writting existing matter etc complete all as specified and directed by EIC
M&L for painting with supper enameled synthetic paint after scrapping out and prepration of surface of OHT steel structures at TRH Pump house complete all as specified and directed by EIC
M&L for structural steel fabricated from structural steel sections including nuts bolts, washers, welding , bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat of, one under coat and one finishing coat of paint.
M&L for structural steel fabricated from structural steel sections including nuts bolts, washers, welding , bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat of, one under coat and one finishing coat of paint.
R N SAH N CO (BID ID -3103231)
M/S B D ENTERPRISE (BID ID -3107637)
M/s B. K. Ghosh and Co. (BID ID -3106041)
GEETA CONSTRUCTION (BID ID -3108100)
M/S JAGRITI ENTERPRISES (BID ID -3106348)
MS ORIENT ENGINEERING WORKS (BID ID -3105569)
D K SARKAR (BID ID -3103027)
R N De (BID ID -3107422)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .