REPAIR AND REPLACEMENT OF FLOORING TILING PLUMBING AND MISC WORK FOR NEW RAISING AD REGT UNDER GE ARMY DHAR ROAD

Amount

Taking down cement plaster or cement Lime plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc upto a height of 20m complete all as specified and as directed.

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings, to be finished even and smooth without using extra cement upto a height of 20m complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6, to be finished even and smooth without using extra cement upto a height of 20m complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and fair with water proofing compound by weight as per manufacturer's instructions upto a height of 20m complete all as specified and as directed. (WPC will be paid separately).

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash upto a height of 20m complete all as specified and as directed.

Preparation of newly plastered surface of walls and apply three coats of white wash upto a height of 20m complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkalic resistant primer and two coats of putty upto a height of 20m complete all as specified and as directed.

M & L for Preparing new plastered or Old plastered surfaces of walls and applying two coats of water proofing putty over one coat of primer and Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces upto a height of 20m complete all as spd and driected .

Demolition of reinforcement Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the similar situations complete all as specified and as directed.

Form work to edges of concrete flats, breaks in floors, treads, breaks in floors, window cills, concrete railings, openings in concrete walls floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10cm wide complete all as specified and as directed. .

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc. complete all as specified and as directed.

M&L for TMT or deformed bar 10mm dia, cut to length, bent to shape required includidng cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9 mm dia.or securing with clips complete all as specified and as directed.

All as per item above but 6 to 8mm dia bars

Taking down chowkhat or frame n exc. 1.5 sqm each but with shutters without taking off shutter from the frame.

All as per item above but exceeding 1.5 Sqm but not exc 4.00 Sqm.

Taking down shutters only of any description area not exc 1.00 sqm each complete all as specified and directed.

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.

S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.

ditto as per item No above but size of 105x60mm.

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shwon in drg consisting with two nos pintol hinges 100 mm long, two nos stove enemaled tower bolts 150 mm long and one no steel handle, deovitailed are welded each panelan complete with necessary cleats and stopers including Taking down all as specified as directed.

Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, partly fixed and partly openable with outer glazed shutter and inner side wire gauge shutter consisting with 2 Nos pintos hinges 100mm long 2 Nos stove enamelled tower bolt 150mm long and 1 Nos steel handle dovetailed or welded with each shutter complete with necessary cleat and stopper including taking down complete all as specified and directed (MS Gaurd bar/grill work will be measured and separately.

S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framing for doors cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.

S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered head s for securing glass/wire mesh etc size of member of shutter with sash bar as specified complete all as specified and as directed.

S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.complete all as specified and as directed.

Supply and fixing for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed. .

Providing Kitchen cabinet /Cupboard shutter in required size at site made out of 18mm thick MDF made out of 18mm thick one side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions.

S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised Width of flaps (when open) in 30mm.

S&F magnetic catcher suitable for kitchen cabinet shutter complete all as specified and directed

S&F for butt hinges, stainless steel, ISI Marked 100mm size, complete all as specified and as directed.

M&L for preparation of new or previously untreated plastered or concrete surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and smooth without using extra cement with water proofing compound by weight as per manufacturer's instructions complete all as specified and directed. (WPC will be paid separately).

Supply only Integral water proofing compound complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.

M&L for PCC 1:2:4, type B1, (20mm graded aggregate) 25mm thick as in sub floor including use of necessary forw work complete all as specified and directed.

M&L for joint free Non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

All as per item above but in skirtings laid over 15mm thick plaster in CM 1:4.

M&L for joint free Non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular ) polished, area of each tiles n.exc 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6) complete.

All as per item above but in skirtings laid over 15mm thick plaster in CM 1:4.

M & L for machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 15mm thick screed bed in CM 1:4 all as specified and as directed.

M & L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 10mm thick plaster in CM 1:4 all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

S&F for 18 to 20mm thick marble slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Rounding to edges of kota/marble stone slabs on edge, such as in steps and other similar situations.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for brick work with sub class `B' bricks, straight or curved on plan to any radius in half brick thick walls built cement mortor 1:4 complete all as specified.

S&F for MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and directed.

All as per item above but 75mm size.

S&F for aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified.

S&F for aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified.

S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified.

S&F for extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified.

S&F for aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and directed.

S&F for stainless steel door stopper 150mm long with double legged rubber bushes at the end complete all as specified and directed.

S&F for mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of eire and avedrage width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Taking down shutters of any description n exc 1 Sqm each and refixing in the same opening

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in the same opening

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc upto a height of 20m complete all as specified and directed

S&F for 4 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc upto a height of 20m complete all as specified and directed.

Taking down aluminium doors shutters and refixing the same after re-setting of all aluminium sections including cleats, beadings and panelscomplete all as specified and directed.

Supply only for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleatsglazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified.

S&F Anodised Power coated aluminium window and ventilator shutters, fixed typwithout sash bar, aluminium sectionweighing 0.55 kg/m includingnecessary joining cleats, glazingclips, rubber packing, anodisedaluminium snap beading, screwsetc. complete all as specified.

S&F 4.8 mm thick tinted sheet glass ordinary quality and glazing with Al glazing clips& EPDM beading in square exc 0.5 sqm in each pane

S&F in repairs door closer hydraulically regulated universal type,sutiable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg of extruded aluminium section designation No-3 complete all as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty & fixed as in repair and including taking down old shutter and refixing in same opening after replacing floor spring complete all as directed.

S&F in repair 20mm dia aluminium Drapery rod, coated finish including PVC brackets & end knob as required complete all as specified

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gde E-165.

Framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165.

S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied and fixed complete to wood or steel member, weight exc 4 kg per Sqm complete all as specified and directed.

Cutting channels, grooves or rebates n exc 15cm girth and trimming surfaces with or without reinforcement.

Taking down and S&F false ceiling with exposed GI powder coated, white colour, grid false ceiling system space using "SILHOUETTE" XL 15mm (nominal) designer grid with 6mm Armstrong white or Global White with black reveal and 600 mm x 600 mm x 15 mm thick prime fine fissured RH 99 micro, look white/coloured tiles(superfine 15mm / silhouette) (M/s Armstrong ceiling tiles) including suspender/ragbolts, plugging to wall/ceiling etc all as per M/s Armstrong ceiling systems complete all as specified and as directed

Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified

Taking up or down 20mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified

M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified and directed

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed completeto walls and ceilings or laid in floors etc complete all as specified .

Re-fixing old steel tubing, bore of pipe in 15mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified

Re-fixing old steel tubing, bore of pipe in 20mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified

Dismantling water tanks exc 250 & n exc 500 capacity in litres and removing to contractor's store

S&F for 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified

Dismantling water tanks exc 500 & n exc 1000 capacity in litres and removing to contractors store

S&F for 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified

S&F in repairs for bib taps, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs for stop valves, 15mm bore, chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in reparis for pillar cock/valve 15mm bore, foam flow chromium plated, fancy type, capstan heads, screwed down high pressure all as specified and directed.

Supply and fixing in repairs brass chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union all as specified.

Supply and fixing in repairs tubular towel rail 20mm dia brass chromium plated, D type, 60cm long between flanges all as specified and approved.

Supply and fixing in repairs brass hat and coat hooks, solid body, 175mm to 250mm all as specified.

S&F in repairs Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repairs grating doom 125mm dia of PTMT (minimum weight 40gms) with waste hole complete all as specified and directed.

S&F in repairs Waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

Taking down CI, AC, PVC pipes of 100/110/200 mm dia of any description including all fittings complete all as specified.

Supply and Fixing 110/200mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified.

S&F in repairs for PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified

Supply and Fixing in repairs, salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ including CI cover complete all as specified and directed

S&F in repairs vitreous china squatting pan white oriisa pattern size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P-trap including cement concrete bedding and making good the disturbed portion to match with the existing surface of floor,complete all as specified and directed.

S&F in repairs vitreous china ware wash down Water Closet (Pedestal) white, including white PVC seat and cover, closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, complete all as specified and directed..

Supply and fixing in repairs low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white,with inlet, including brackets complete all as specified and directed.

S&F in repairs for vitreous china ware Wash Hand Basin, white, flat back of size 550 x 400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length with all fittings etc complete all as specified and directed.

S&F in repairs stainless steel plate rack of overall size 600mmx900mm and weight not less than 6 Kgs as approved and directed.

S&F in repair sink made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, over all size 495mmx420mm, bowl size 410mm x 330mm x160mm complete all as specified and directed

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

S & F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S&F plain galvanized 0.63 mm mild steel sheeting in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and the work upto a height of 20m complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) 6 to 8mm thick forming holes, withoutany attachment complete all as specified and directed.

S&F Rough cast wired figured glass, 6.4mm thick n.exc. 1.5 sqm complete all as specified and directed.

Deduct Schedule of Credit of Rs. (-) 62970.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

NARESH KUMAR KHAJURIA (BID ID -3354453)

M/S SANJAY STEEL WORKS (BID ID -3354314)

PARAS RAM ASGOTRA AND SONS (BID ID -3353725)