ADDN ALTN TO BLDG NO 1/3 NCC OFFICERS MESS OF HQ NCC DTE (TNP and AN) UNDER GE CHENNAI

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for flyash brick work with old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed.

M & L for Brickwork with fly ash bricks ,straight or curved in any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for Preparation of new plastered surfaces of wall and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY

Supply only Liquid water proofing compoud

Dubbing out average 15mm thick on irregular face of walls in patches in CM (1:4) complete all as specified and directed.

M&L for rendering 5 mm thick using CM (1:3) on ceiling surfaces in patches finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of old decorated plastered surfaces of ceiling and applying two coats of white wash all as specified and as directed.

M&L for preparation of newly plastered surfaces on ceiling and applying three coat of white wash all as specified and directed.

M&L forPreparing the new surface thoroughly by cleaning,of roof slab till the mother slab is exposed and washing down with clean water to remove all dirt etc. The slab should be recoated with slurry of Dr. Fixit Pidicrete URP or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP and cement in 1:1 proportion. After drying, Dilute 2 parts of Dr. Fixit Primeseal or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP with 1 one part of water. This dilution shall cover 7 to 8 sq.mt. Allow it to dry for6 to 8 hrs.Apply the first coat of Dr. Fixit Newcoat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP without any dilution at the rate of 2 sq mt per litre and allow it to dry before taking up the second and third coats, the rate of application being the same. and open woven glass fibre mesh of 2.5 mm x 2.5 mm must be sandwiched between the first and second coat. While the 1st coat is still wet, place the fibre mesh on it. After the coat dries, start applying the 2nd coat of Dr. Fixit Newcoat or its techno commercial equivalent in BASF/FOSROC/CICO/MC-BAUCHMIE/STP .

M & L for Complete removal of existing treatment & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of new plastered surfaces of walls complete all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of new plastered surfaces of walls complete all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

M & L for complete removal of existing treatment on wall surfaces and washing, rubbing down and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 to 1.5 mm thick plaster of paris on old surfaces of wall complete all as specified and as directed.

M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed.

M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed.

M & L for Applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towel, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 - W (Grade E-250 Quality -B ) complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each including builders hardware complete all as specified and as directed.

Taking down door shutters of any description exc 1 Sqm and n.exc 2 Sqm and refixing in the same opening after laying floor tiles and making necessary alterations to the size of shutters to suit with the door opening to the required height all as specified and as directed.

M&L for Second class Hard wood, plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make. GYPTECH /ARMSTRONG or equivalent complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane (any thickness, size, quality or description ) to wooden/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified

S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clips complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed.

S&F 2nd class hard wood panelled shutters 35mm thick, plain framed (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS :1003(Part-I), kiln seasoned and chemically treated and fitted to chowkats complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood Glazed and skeleton door/window shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs, complete all as specified and as directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165 complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials treating ends of posts, back of chowkats etc with tar or coal tar black paint area tarred exc 0.1sqm but n.exc 0.5sqm each complete all as specified and as directed.

M&L treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, back of chowkats, etc.,area n exc 0.1 sq. m each etc with tar or coal tar black paint complete all as specified and directed.

S&F stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long all as specified.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long all as specified.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

S&F mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F in repairs Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S& F 140 mm over all length of cover plates floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed.

S&F Ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed overall length of cover plate 150mm complete all as specified and as directed.

M & L in repairs 20mm dia mild steel CP curtain rods with brackets, stop rollers etc all as specified

S & F Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface all as specified and directed.

Supply and fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

M& L in repairs mortice lock vertical type brass size 100 mm 4 levers with stainless steel handle set suitable for right or left, inside or outside opening doors complete all as specified and directed.

S&F aluminium anodised powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ ventilator/partition, glazing clips with one or more rebates including joining cleats fot fixing complete all as directed by Engr-in-Charge.

S&F Anodised aluminium door shutters powder coating of any colour (Thickness of powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified

S & F aluminium powder coated sliding window 3 track using aluminium section weighing not less than 0.900 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 4mm thick tinted glass fixed with glazing clips, and one for aluminium wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh, hinges, bow handles, locking arrangements etc complete all as specified and as directed.

S&F aluminium anodised powder coated (minimum thickness of powder coating 50 micron) window security grills DG 104 with frame 6mm thick 75 mm aperture fixed with joining cleats etc complete all as specified and as directed.

S&F for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutter and shelves etc. In repairs including Ist class hard wood bedding all around the shutter and paints with synthetic enamel paint to beading complete all as specified and as directed.

S & F 12 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to aluminium/ timber frame work complete all as specified and as directed.

M&L for 6mm thick external teak wood lipping over 18/19mm thick particle board fixed with nails complete all as specified and as directed.

S&F in repairs continuous (piano) hinges mild steel, bright finish or electro galvanised width of flaps (When open) in mm 30mm complete all as specified and as directed.

Supply and Fix in repair Locks, drawer, cupboard shutters grade I, size 75 mm Brass 4 levers complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and as directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M &L Non -skid coloured ceramic tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item No. 70 above but on skirting/dado including backing coat of 10 mm thick in CM 1:4 complete all as specified and as directed.

M & L for ceramic mosaic exterior wall tiles of 10mm thick in multi colour and area not exceeding 0.18Sqm as approved by GE, fixed in vertical surfaces in patches such as in dado/ walls set and jointed in neat cement slurry and pointed in white or coloured cement to match tile over and including a backing coat in Cement Mortar 1:4, 10mm thick complete all as specified and as directed.

M & L for glazed ceramic coloured tiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.

M&L for Vitrified Ceramic light coloured tiles in Patches of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and pattern of the tile as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Ditto all as item No. 74 above but on vertical surfaces such as skirting, dados and risers to step etc.but providing 10mm rendering on wall in CM 1:3 complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 25mm dia complete all as specified and as directed.

Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings all as specified for following pipes :- (a) 20mm outer dia bore

(b) 25mm outer dia bore

(c) 32mm outer dia bore

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs including dismantling of existing tank of any description and removing to store and S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminum rod and polyethylene high density float screwed for iron pipe complete all as specified and directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20mm dia bore pipes complete all as specified and as directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25mm dia bore pipes complete all as specified and as directed.

S&F in repairs toilet paper holder with flat recessed type matt chromium plated of make that shall match with existing fitting i.e, jaquar complete all as specified and as directed.

S & F in repairs 15mm Bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs for two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make Jaquar or its techno commercial equivalent in other makes complete all as specified and directed.

S&F in repairs for two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union of make Prayag or its techno commercial equivalent in other makes complete all as specified and directed.

S&F in repairs 15mm dia pillar taps fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

S&F 15mm dia concealed Brass Angle stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs of make Prayag Cat No 6510 complete all as specified and directed.

S&F in repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair Sink made out of stainless steel 1mm thick with drainage board for kitchen and laboratory with plugs washers and wastes, including beading in cement mortar to dwarf of including fixing canti lever brackets and connecting union to pipe overall size 915mmx460mm bowl size for 410mmx330mmx160mm including 40mm size CP waste coupling and PVC waste pipe complete all as specified and as directed.

S & F in repairs 15 mm dia bore pillar tap long neck with aerator fancy type cast copper alloy with crutch handle screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.

S&F in repairs for 15 mm bore sink cock with swinging spout wall mounted model with wall flange of make that shall match with existing fitting i.e, jaquar complete all as specified and as directed.

S&F in repairs Wall mixer 3-in-1 system with provision for both telephone shower and over head shower and of make that shall match with existing fitting i.e, jaquar complete all as specified and as directed.

Supply and fix in repair PVC connections 15 mm size with two brass nuts of length 450 mm complete all as specified and as directed

S&F in repairs health faucet (hand shower with 1 M flexible tube with wall hook, chromium plated of make that shall match with existing fitting i.e, jaquar complete all as specified and as directed.

S&F in repairs health faucet (hand shower with 1 M flexible tube with wall hook, chromium plated of make that shall match with existing fitting i.e, prayag complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe & waste pipe) but including connections to flushing pipe and outgoing pipes complete all as specified and as directed.

S&F in repairs 125mm Chromium plated brass shower roses with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer's instruction and as directed by the Engineer in charge

S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (ETWC) and fixed including Plastic seat cover, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified

S&F in repairs vitreous china wash basin of oval type including counter top granite platform , waste coupling, waste pipe and brackets etc complete all as specified and as directed.

S&F in repair 20mm dia Tubular towel rail 600mm long between flanges 'D' type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/Colour CP)of make that shall match with existing fitting i.e., jaquar complete all as specified and directed .

S&F in repair Cabinet Mirror PTMT 400 x 500 mm with sided shelves fancy type of superior quality Cat No.554 Make : Prayag complete all as specified and directed.

S&F for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. Fe-410- W(Gde- E-250) quality- B(cut to ordinary lengths i.e. Within 20mm of the length indicated) complete all as specified and as directed.

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) including taking down old one complete all as specified and directed.

S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints laid in trenches or in floors complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls / floors complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) bends 110 mm bore any radius with oval access door complete all as specified and directed.

S & F PVC (SWR) bends 75 mm bore any radius with oval access door complete all as specified and directed.

S & F PVC (SWR) Junction (Single T) 75 mm bore with oval access door complete all as specified and directed.

S & F (SWR) branch Single (single Y) equal or unequal for 110 mm bore pipe with oval access door complete all as specified and as directed.

S & F (SWR) vent cowl suitable for 110 mm bore pipe complete all as specified and as directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Cutting holes into or through brick walls but in brick walls superficial area n.exc 150sqcm built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete. and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, kitchen shelfs etc( laid, bedded and pointed in any mortar) complete all as specified and as directed.

M&L for granite slab (of any type) 18 to 20mm thick machine cut, laid over and including 20mm thick cement screed in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/cooking tops including cutting and polishing etc., complete all as specified and as directed,

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in sub base finishing surface even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.

M&L for Precast cover slab 1:2:4, type B1 (using 20mm graded aggregate) in landings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, for manholes etc complete all as specified and as directed. Note: Reinforcement will be measured and paid seperately.

M/L 10mm dia and over TMT bars as in reinforecment cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips all as specified and as directed

Taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses,regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed.

Taking down carefully by unservicable fittings of different size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified

M&L for point wiring of size 1.5 sqmm with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through new non metallic rigid PVC conduit including accessories, concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provision of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

(c ) one 3 pin socket outlet 5 amps on the same board controlled by one switch.

(d) one 3 pin socket outlet 5 amps on independent board controlled by one switch.

(e ) one bell/buzzer point controlled by one bell push

All as per item No 131 above for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

All as per item No 131 above for one 3 pin socket outlet , 15 amps control by one switch independent board with cable 4.0 sqmm size complete all as specified and directed.

M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through non metallic rigid Existing PVC conduit , in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

(c )one 3 pin socket outlet 5 amps on the same board controlled by one switch.

(d) one 3 pin socket outlet 5 amps on independent board controlled by one switch.

All as per item No 134 above but for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

S & F for modular cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge

S & F for modular cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge

S & F for modular cover plate with frame 6 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed by Engr-in-Charge

S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed by Engr-in-Charge

S&F modular bell switch suitable for type AC 240V, 16 amps complete all as specified and directed by Engr-in-Charge

S&F call bell of multi music type A/C 230 volts complete all as specified and directed.

S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed by Engr-in Charge

Taking down ceiling fan and exhaust fans of any size and any description including connected accessories and deposited in AGE E/M store complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator( 2 Modular) and accessories, 230 V, 1200 mm sweep, Five star rated with brushless direct current motor, complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, 5 star complete all as specified and directed

S&F lamp holder insulated body with back plate for batten fittings/angle holder complete all as specified and as directed

S&F of LED bulb 9 w high suitable for lamp holder including taking down carefully unserviceable fittings and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make : Havells Cat No. LED PLUS 9W B22 CDL 2STAR LAMP or techno commercial equivalent in Philips /Bajaj

S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 10 Watts COOL LIGHT environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaries comprising of high brightness LEDs, incl taking down unserviceable fittings of any size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make Havells Cat No. HEXAFT10WLED857SSYMBOPC or techno commercial equivalent in Philips /Bajaj.

S & F 36 Watts 2x2 ceiling COOL LIGHT a versatile 2X2 recess mounted luminaires which suits various ceiling types with option to add mounting kits for POP ceiling & suspension clamp for pendant mounting from true ceiling, complete all as specified and as directed by the Engr-in-Charge. Make Havells Cat No. VENUSNEO2X2PLR36WLED865G2 or equivalent to Philips/Bajaj.

Taking down sub main wiring any type and any size complete after taking proper disconneting of electric supply properly and making surface good complete all as specifided and directed

S&F sub main wiring complete with two runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 6 way MCB DB, TPN with 200 Amp rated bus bar conforming to IP 38 protection including taking down old ones complete all as specified and directed.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 12 way MCB DB, SPN with 200 Amp rated bus bar conforming to IP 38 protection including taking down old ones complete all as specified and directed.

S&F MCB of rating 415 Volts, TPN 100 Amps complete all as specified and directed by Engr-in Charge including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of rating 240 Volts, SPN 63 Amps including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3479430)

DJ Group (BID ID -3484681)

JK INFRA (BID ID -3485081)

Sri Aruna Associates (BID ID -3478422)

SIRITEL SYSTEMS PRIVATE LIMITED (BID ID -3479849)

KS CONSTRUCTIONS (BID ID -3479227)

Banyan Engineers and Contractors (BID ID -3479187)