Renovation of J and K Special Tribunal Building including construction of parking at Janipur Near Daily Excelsior Building, Jammu

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Complete Job)

Providing and applying white cement based putty off average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Complete job)

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 Osqm over and including base Coat of water proofing cement paint applied @ 2.20kg/10sqm) (Complete Job)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : two or more coats on new work. (Complete Job)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. (Complete Job)

Renewing glass panes, with wooden fillets wherever necessary : Glass panes weighing 10 kg/sqm (Complete Job)

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS : 13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement mortar 1 : 4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. (Complete Job)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood (Complete Job)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. plywood 5 ply 9 mm thick (Complete Job)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 300x10 mm (Complete Job)

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm (Complete Job)

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality) (Complete Job)

Providing and fixing C.P jet of approved make (Complete Job)

Supply and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 Part-I and M.S top cover of required thickness for rolling shutters. 80 X 1.25 mm M.S. laths with 1.25 mm thick top cover (Complete job).

Renewing bottom rail and I or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer: (Complete Job)

Flush pointing with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska: With F.P.S. brick tiles (Complete Job)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40 mm nominal size) (Crushed) (Complete Job)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-15 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. (Complete Job)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) (Crushed) (Complete Job)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. (Complete Job)

Puneet Verma

M/S GUCHHU RAM

Ashok Kumar Gupta

Sanjay Kumar Gupta