ADDITION ALTERATION AND SPECIAL REPAIRS TO SINGLE OFFICERS ACCOMODATION P163 65 ACCN IN DRDO TOWNSHIP PHASE I CV RAMAN NAGAR BANGALORE

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar 1:4 and finished to match with existing surface complete all as specified and as directed.

S&F to frame factory made solid PVC door shutter 30mm thick (style) considering of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails and bottom rail on side and on gap insert for top rail and bottom rail paneling of plain colour PVC shutter to be fitted in MS frame included/sealed to the stile, rails with suitable PVC sheet heading and jointed together with solvent colour complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exc 4sqm each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

Taking down, easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws etc., and refixing in the same opening after laying of tiles, shutters of any description exceeding 1.0 sq.m but not exceeding 2.0 sq.m each, complete all as specified and directed.

S & F pressed steel frames of size 125 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges lock strike plate etc complete all as specified and as directed.

M & L PCC 1:3:6 type C0 ( 12.5mm graded stone aggregate) as in filling the chowkats / frames complete all as specified and as directed.

S & F 35 mm thick plain framed paneled factory made shutters with IInd class hardwood rail and style with lock rail and panel of 9 mm BWP commercial ply with commercial veneer on both faces. The size of rail and style as per IS-1003 Part-I complete all as specified and as directed.

S & F 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauge (without sash bars) edges of framing plain, chamfered or round fitted with cut and mitered beads for securing wire gauge sizes of members of door shutters all as specified and as directed.

S & F 35mm thick flush shutters, soild core construction with block board core and plywood face panels, both face is covered with decorative face veneer with lipping / frame to match. The rates for flush shutters include for the provision of suitable blocks for taking mortice locks, latches or other fittings and including provision of magic eye piece complete all as specified and as directed.

S & F moritce lock (six lever) vertical type, brass of 100mm size including handle, screwing and fixing all as specified and as directed.

S & F aluminum body (extruded section) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed all as specified and as directed.

S & F pressed steel frames of size 105 x 60mm x 1.25mm thick for door with one rebate including necessary fixing lugs, hinges lock strike plate etc complete all as specified and as directed.

S & F Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

S & F in repairs Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

S & F Aluminium anodized barrel tower bolts of extruded section, 100 mm long all as specified and as directed.

S & F 150mm long Extruded aluminium alloy handles, fabricated type anodised ,all as specified and as directed.

S & F in repairs 150mm long Extruded aluminium alloy handles, fabricated type anodised ,all as specified and as directed.

S&F Hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate with screws 100mm size

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.

S & F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.

S & F door stopper of aluminium alloy body, 150 mm size all as specified and as directed.

S & F in repairs door stopper of aluminium alloy body, 150 mm size all as specified and as directed.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel.complete all as specified and as directed..

S&F in repairs Butt hinges 100mm size, medium weight, cold rolled mild steel.complete all as specified and as directed..

S&F Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed type B-21 of 100mm size all as specified.

S&F single action spring hinges 100mm size, mild steel with steel wire spring, stove enameled, black complete all as specified and as directed..

Dismantling of composite steel windows/ventilators not exceeding 0.60 Sqm single leaf double shutter with fixed portion including taking down glass panes and mosquito proof mesh but except grill/ guard bars in any position complete all as specified and directed. ( ONLY SHUTTER DISMANTLING)

Dismantling of composite steel windows/ventilators exceeding 0.60 Sqn but not exceeding 1.80 Sqm double/triple leaf double shutter with fixed portion including taking down glass panes and mosquito proof mesh but except grill/ guard bars in any position complete all as specified and directed. ( ONLY SHUTTER DISMANTLING)

Dismantling of Aluminium door double/triple leaf with fixed portion on top including takind down glass panes and prelaminated particle board and grills in any posting complete all as specified and as directed.

S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat section for fixing etc complete all as specified and directed.

S & F powder Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty and glazing with oil putty and necessary clips as squares exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty and necessary clips as square n exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty and glazing with oil putty and necessary clips as squares exc. 0.5 Sqm in each pane complete all as specified and directed.

M&L for Prelaminated particle board12 mm thick , interior grade, prelaminated both side with decorative choice lamination, fixed with screws/clips to Aluminium frame work complete all as specified and as directed..

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S/F in repairs tubular curtain rail, stainless steel anodized 20 mm dia all as specified & as directed including taking down unserviceable rod/rail complete all as specified and directed.

S/F in repairs stainless steel type brackets suitable to hold the curtain rod with sofio phenol (Lotto) and wooden round blocks suitable to curtain rod of 20mm dia, decorative type fixed with suitable steel screws and PVC cleats, including taking down unserviceable brackets complete all as specified and directed.

Cutting chases pinning in making good for brick walls to facing where required and pointing in cement mortar 1:3 to ends or edges of concealed water tubing and similar work including making good cutting not exc 10CM girth. Complete all as specified and directed.

S&F 18 mm thick Prelaminated particle board interior grade one side with decorative choice lamination & other side balancing white lamination, and including 6MM thick teakwood lipping fixed with screws to timber frame work complete including taking down old boards all as specified and directed.

Taking up or down 15mm dia GI tubing surface / concealed laid in wall / floor / ceiling complete all as specified and directed.

Taking up or down 20mm dia GI tubing surface / concealed laid in wall / floor / ceiling complete all as specified and directed.

Supplying & laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 with all fittings fixed on walls / ceiling or laying in floors complete all as specified. Note: The quoted rate shall include for all fittings, like brass elbow, brass tee, male brass threaded adaptor, female brass threaded adaptor etc.

S&F GI Tubing medium grade with all fitting fixed to wall/Ceiling or laid on floor complete of size 20mm bore all as specified and as directed.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 110 mm dia, type B (conforming to IS 13592) single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 75 mm dia, type B (conforming to IS 13592) single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed. Note for Sl item no. 43 & 44:- Provision of necessary scaffolding for replacing defective pipes shall be deemed to be included in quoted rates, and nothing extra will be admissible in this regards.

S&F PVC (SWR) pipe, 40mm dia including necessary connectors, bends, Tee etc conforming to IS:4985-2000 fixed with solvent cement joints, laid on floor or on walls, fixed as drain pipe in wash hand basin, spout pipes in balconies etc., including taking down old unserviceable pipes, complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm bore with access door, complete all as specified and directed.

S&F PVC (SWR) junction single 'T' equal or unequal 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single 'T' equal or unequal 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore with access door, complete all as specified and directed.

S & F PVC (SWR) multi-floor trap, plain with chromium plated grating including jointing with solvent cement, 75mm dia, including dismantling the damaged trap, complete all as specified and directed.

S&F PVC (SWR) floor trap with and including, plain / single hole chromium plated grating including jointing to waste pipe with solvent cement, 75mm dia, complete all as specified and directed.

S & F PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl all as specified and as directed.

S&F PVC (SWR) gully traps square or round mouthed type 'P' of size 150 x 150 mm including taking down connecting to existing line and provision of PCC bedding complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debris out side MD land complete all as specified and as directed. Note:- demolition of traps/pipes if any is deemed to be included in the rates and nothing extra shall be admissible.

Roughening surfaces of old concrete floor by picking sweeping clean , and washing down with water to remove dust complete all as specified and directed

Demolition of cement concrete (un-reinforced) in any description in any position as sunken floor ,Roof padding, floor top etc and removing debris outside MD land complete all as specified and directed.

M&L 15 mm thick rendering in CM 1 : 3 on fair faces of brick work or concrete surfaces finished fair and even mixed with water proofing compound complete all as specified and directed Note : WPC will be measured and paid separately.

Supply only liquid water proofing compound

M&L applying 10mm thick BRUSHBOND RFX GREY or equivalent using stiff brush or trowel to the plastered surface in sunken floor complete all as specified and as directed.

Dismantling water tanks from roof any description of 1000 Ltr capacity complete all as specified and directed

S&F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20 mm bore complete all as specified and directed .

Demolition of cement concrete in ground floor and paving n exc 15cm below or above ground level and removing debris outside MD land complete all as specified and as directed.

M&L for PCC 1 : 5 : 10 type E2 (using 40 mm graded stone aggregate) as in filling and mass concrete of the sunken floors complete all as specified and directed.

M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified and as directed.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) of 25mm thick as in floor finished fear & even all as specified and as directed.

S&F Coloured Non Skid ceramic tiles of grade BIIa/BIIb 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in epoxy grout to match colour of tiles.

M&L glazed ceramic coloured printed tiles of grade BIII in vertical surface of wall tiles of size 300 x 450 x 7mm thick as in dado set and jointed in neat cement slurry & pointed in epoxy grout to match colour of tiles over and including 10 mm thick backing coat in cement motor 1:3 all as specified and as directed.

M&L 5 mm thick polymerized (Latecrete ) cement mortar screed bed for laying floor tiles complete all as specified and directed

M&L Screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes, complete all as specified and directed.

M & L double charged Vitrified tiles light colour 10mm thick (square/rectangular) polished, area of each tiles not below 0.36 sqm, in floors etc, set and jointed and pointed in epoxy grout to match all as specified and directed.

M&L for double charged Vitrified tiles light colour 10mm thick (square/rectangular) polished,size of tiles to match with that in floor, in skirting and dado including 10mm CM1:3 render etc, set and jointed in neat cement slurry and pointed epoxy grout to match complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc debris outside MD land complete all as specified and as directed.

M&L Granite work (of any type), 20mm thick, (table rubbed and pre-mirror polished), in single piece, in steps, jambs, pillars, window cills, cooking platforms, wall cladding to lift and like, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including making hole for gas pipe including full rounding the edges of granite, laid over and including provision of screed bed or bedding layer, 15mm thick in CM 1:4, complete all as specified and directed.

Machine cut kota stone slab flooring 22-25mm thick, using single piece kota stone slab in treads / floor etc., set and jointed in neat cement slurry and pointed in coloured epoxy grout to match, laid over and including provision of screed bed or bedding layer of CM 1:4, 15mm thick, cutting two grooves (serration), complete all as specified and directed.

Machine cut kota stone slab 20-25mm thick, using single piece kota stone slab in risers of staircase etc. to match in size and pattern, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match, laid over and including provision of backing coat of CM 1:4, 10mm thick, including rubbing and polishing including dismantling existing plastering and removal of debris out of premises etc., complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations for Granite / kota stone slab complete all as specified and as directed..

S&F for Framed work as in doors/door frame or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (G FE 410, E-250) quality B complete all as specified and as directed.

M&L framed work such as Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including pintle hinges, stops, hand -made sliding bolt complete all as specified.

Taking down old wooden cupboard shutters and shelves complete all as specified and directed.

M&L for 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timberframe work complete all as specified and as directed.

S & F Continuous (piano) hinges,mild steel, bright finish or elec trogalvanised width of flap is 40mm when it is in open all as specified and as directed

S & F fancy type stainless steel handle of size 100 mm long complete all as specified and as directed

S&F Magnetic ball catches of standard type complete all as specified and as directed.

S&F in repair 40mm dia high density flexible waste pipe with sockets for sink 90cm long all as specified and as directed.

Supply and fix new Stainless steel plate rack of 0.60mm thick sheet, size 787x914x254mm (31"x36"x10") complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding waste, chain and plug and porcelain stopper but including brackets, with inlet and outlet screwed for pipe or connections including Brass chromium plated bottle traps necessary packing, union and cap and complete all as specified and as directed.

S&F in repair Vitreous China wash basin, oval bowl counter wash basin of size 560x470x190mm, with necessary cutting and connections including Brass chromium plated bottle traps necessary packing, union and cap and fixed in repairs complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, water closet pan (pedestal pattern), with PP soft seat cover, hinges, other fixing accessories set (excluding flushing cistern and flush pipe), UPVC (SWR), 'P' trap, and connecting to drain (or outgoing pipe), flush pipe, anti syphonic pipes, including removing debris outside MD land,

Supply and fix in repairs, Vitreous china, white colour, water closet pan (pedestal pattern), with PP soft seat cover, hinges, other fixing accessories set (including flushing cistern and flush pipe), UPVC (SWR), 'P' trap, and connecting to drain (or outgoing pipe), flush pipe, anti syphonic pipes, including removing debris outside MD land, complete all as specified and as directed.

Supply & fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe, including removing debris outside MD land.complete all as specified and as directed.

Supply and fix in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including jointing with new PVC long / short flush bend and making good to the disturbed surfaces complete all as specified and as directed.

Supply and fix Health faucet, with 8 mm dia, 1.2 m long, flexible tube in chrome finish, wall hook with NRV (back flow preventer), complete all as specified and directed.

Supply and fix, two way, bib taps, fancy type, 15 mm dia, cast copper alloy, chromium plated, with CP flange, screwed for iron pipe or for brass ferrule, complete, all as specified and as directed.

Supply and fix in repairs, Bib taps 15 mm dia, fancy type, chromium plated with CP flange complete all as specified and as directed.

Supply and fix basin mixer pillar tap, 15 mm dia, fancy type, chromium plated with CP flange, long shank after taking down old pillar taps complete all as specified and as directed.

Supply and fix in repairs, Angular stop cock, fancy type, with chromium plated wall flange, cast copper alloy, screwed both ends for iron pipe or for brass ferrule,15mm dia, complete all as specified and as directed.

Supply and fix in repairs, Chromium Plated overhead shower rose of size 125 mm with swivel joints, over head shower arm of 200 mm long with wall flange, complete all as specified and as directed.

Supply and fix in repairs, single tube towel rail, brass chromium plated, 600 mm long fixed with chromium plated screws and PVC cleats, complete all as specified and as directed.

Supply and fix, PVC mirror cabinet of size 330 mm x 430 mm , complete after taking down old mirror cabinet all as specified and directed.

S & F PVC connecting pipe 600mm long 15 mm dia both end having brass coupling nut and PVC washer fixed in repair all as specified and as directed.

Supply and fix in repairs, Chromium plated, 15mm bore dia of pipe Wall mixer with bend pipe for overhead shower, built-in non return valve with CP wall flanges, complete all as specified and as directed.

M & L Gun metal Gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including cutting the old pipes as in repair complete all as specified and directed

Excavation in trenches not exc 1.50 m wide and n. exc 1.50 m deep and getting out in hard / dense soil all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate all as specified and directed.

Demolition of concrete of any description as in bed concrete of pipe including breaking up drain pipes of 150 / 160 mm bore (Salt Glazed stone ware / AC / RCC / UPVC) set in cement mortar complete and removing the rubbish outside MD land, providing Material and labour, for Plain Concrete bed to 150 / 160 mm bore drain pipe including packing under and haunching against the sides of pipes, after they are laid and tested, with plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) complete all as specified and as directed. Note : Supply and laying of pipes will be measured and paid for separately under respective items.

Supply and lay, UPVC (SWR Grade) pipes of 160 mm internal dia, foam core, 0.4 Mpa (class 2) with pressure rating @ 4 Kg / Sq cm, laid in trenches and jointed in cement solvent including bends, elbows, etc., complete all as specified and as directed.

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate

Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.all as specified and directed.

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.

Cutting holes into or through in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete superficial area not exc 150sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

M & L PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) with leveling as reqd thickness on roof with water proofing liquid all as specified and as directed. Note: WPC will be measured and paid separately under relevant item.

M & L Rendering 10mm thick in CM 1 : 3 on concrete surface even and smooth on roof surface with mixing of water proof liquid finished when concrete is green complete all as specified and directed. (Note : WPC will be measured and paid separately under relevant item.)

Material and labour for roof treatment as follows:- (a) M&L Chip out the existing loosed bitumen/bitumen membrane completely reach up mother slab, clean the surface throughly to make it smooth and free of any foreigh material, repairs the concrete wherever damaged using PMM HS repairo, repairing of construction joints/cracks by chasing with cutting machine and fill the same with polymerized mortar in HS repairo, coving of 75x75mm should be made at the junction of wall and raft slab using polymerized cement mortar 1:4 admixed with advanced latex plus. (b) Applying one coat of 50% diluted self priming PU roof coat. Allow to dry priming coat for 4-6 hours before applying PU coat and surface to be cleaned before applying PU coat. (c) Applying two coats of single component, cold applied, water based polyurethane modified acrylic dispersion with highly elastic and UV resistant water proofing treatment to the roof with HS PU Roofkoat of Berger or Equivalent at 0.6 kg/Sqm for each coat without dilution confirming to ASTM D 6083-97a (Standard Specification for Liquid Applied Acrylic Coating Used In Roofing) Each coat should allow to dry 4-6 hours The component shall have a density of 1.25 to 1.3kg/per Litre, having tensile strentgh of 1.5N/mm2, having elongation of 350% with solid content not less than 60% in 2 coats .SRI value should be more than 100. The Quoted rate shall include surface prepartion,repair the crack in mother slab by chasing with cutting machine and fill the same with polymerized mortar in CM 1:4 admixed with latex agent of reputed manufacture, making coving at Junction, bore packing, treatment of construction joints completely as per manufacurer's specification and direction of the Engineer In Charge. NOTE:- The above treatment shall be got carried out by the authorised applicator of the manufacturer approved by the GE.

Demolition of reinforced cement concrete of any description and in any position at level of 15 m high as in roof chajjas, fascia and parapet any thickness and removing the debris out side MD land complete all as specified and directed.

Form work to chajjas and similar work rough flat finished surface concrete.complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs exc 5cm but n exc 10 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and directed.

M &L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 9 mm dia complete all as specified and directed.

M&L Mild TMT bars 6mm to 8mm dia as in stirrups ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality.complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in drain covers and similar works and set in CM 1:4 including necessary form work complete all as specified and directed. (note : steel for reinforcement will be measured and paid separately)

M& L for RCC 1:2:4 TYPE B1 (normal mix) (using 20 mm graded stone Aggregate) as in chajjas complete all as specified and directed.

M& L for RCC 1:2:4 TYPE B1 (normal mix) (using 20 mm graded stone Aggregate) as in fins, facias, louvers, parapets complete all as specified and directed.

M& L for RCC 1:2:4 TYPE B1 (normal mix) (using 20 mm graded stone Aggregate) as in Beams, cantilivers, shelves, kitchen slabs complete all as specified and directed.

Cleaning of loose scales & corrosion deposits from exposed reinforcement with steel wire brush or any other mechanical means of exposed steel after removing loose/damaged concrete complete all as specified and as directed.

Applying one coat of anti corrosive agent NITOZINC Primer on exposed steel surfaces (new & old) making sure the surfaces are properly coated complete all as specified and as directed.

Epoxy resin concrete bonding agent NITOBOND EP on old exposed concrete surface for bonding new cementitious materials to existing cementitious surface complete all as specified and as directed.

M&L Pressure Grouting 25 mm thick including any temporary shuttering to edges with cement mortar 1:2 complete all as specified and as directed.

M&L pressure grouting 40 mm thick including any temporary shuttering to edges with cement mortar 1:2 complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L Pre-cast cement concrete block masonry with solid blocks set in CM type B1 1:3:6 using 20mm graded aggregate, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and directed.

M & L precast reinforced cement concrete 1:2:4 type BO, (using 12.5 mm graded stone aggregate) as in pre cast cover slab of size 400x450 mm, 40 mm thick reinforced with hard drawn steel wire fabric of mesh size 150 x 150 mm and 4.75 mm dia wire including taking down cover slabs etc including necessary form work complete all as specified and directed.

S&F Chequered cement concrete commercial Tiles 25cm x 25cm x 20 to 22mm /30cmx30cmx20 to 25mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid and over and including 15mm Screed in CM 1:6 including all as specified and as directed.

M & L 75 mm thick plain cement concrete 1 : 3 : 6 type C2 (using 40 mm graded stone aggregate) as in paving/ plinth protection laid in pannels , finished even and fair complete all as specified and directed.

S & F for chicken mesh of apertuer 12.5mm in least dimension with a weight not less than 0.4Kg/Sqm all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick on curved profile of an color having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as specified. Including taking down of old sheet.complete all as specified and directed.

S&F Toilet paper holder of stainless steel box type fixed by screw in wall as spd and directed

Supply and fix , brass chromium plated, fancy type, soap dish, and fixing with brass screws, complete all as specified and directed.

Supply and fix , Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

Supply and fix , Corner glass shelf(medium) 225mmx225mm with chromium plated bracket superior quality complete all as specified and as directed.

S&F CP Peg set (set of three) fancy type complete all as specified and as directed

Taking down old sinks and Supply and fixing Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm with bowl size 405 x 355 x 178 mm including CP waste coupling of 100 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and directed.

Taking down/ removing vegetation growth / plants of any size of area n.exc 0.5sqm above chajjas, roof slabs, parapet walls, junction of SWR pipe and wall etc up to roots and applying/ injecting chemical and making good the surface in CM 1:3 up to height of 16 m all as specified and as directed.

Taking down cement plastering of any thickness on brick, concrete or stone walls, partitions, ceilings etc including raking out joints, hacking for key, scrubbing down with water etc, removing debris outside MD land complete all as specified and as directed.

M&L for 15mm thick rendering on brick or concrete surface in cement mortar 1:4 and finishing the surface with even and fair all as specified and as directed. Note: Water proofing compound shall be measured and paid separately

M&L for 10mm thick rendering on brick or concrete surface in cement mortar 1:6 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

M&L for two coats of oil bound distemper over one coat of acrylic water based interior grade primer @ 0.8ltr (undiluted / 10Sqm) diluted with water in 1:1 ratio over water proof cement based putty @ 1Kg (undiluted) per sqm of average thickness 1mm over the plastered surface of ceiling and sanding the putty surface with mechanical wall sander having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc all as specified and directed.

M&L for two coats of oil bound distemper over one coat of acrylic water based interior grade primer @ 0.8ltr (undiluted / 10Sqm) diluted with water in 1:1 ratio over water proof cement based putty @ 1Kg (undiluted) per sqm of average thickness 1mm over the plastered surface of wall and sanding the putty surface with mechanical wall sander having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc all as specified and directed.

M&L for preparation of newly plastered wall surface and applying two coat of premium acrylic smooth exterior emulsion of approved colour with silicon additive & color stay technology, excellent dirt pick up resistance with low VOC less than 50 gram / litre as per the LEEDS specifications, anti algal properties in two coats @ 1.79 litre (undiluted) / 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted) / 10 sqm diluted with water in 1:1 ratio as per manufacturer's instruction complete all as specified and directed.

M&L two coats of synthetic enamel paint OVER A COAT OF RED OXIDE PRIMER on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces exc 10 cm in width or girth complete all as specified and as directed.

M&L Preparation of old wooden surfaces and applying two coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed.

M & L for painting of old steel surfaces of any description not otherwise described over 10 cm width or girth two coats of synthetic enamel paint etc complete all as specified and as directed.

M&L for Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" / 9" to make the surface free from dust, loose paint etc, by skilled labour and apply two coats of oil bound distemper over one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted / 10 sqm) diluted with water in 1:1 ratio over water proof cement based putty @ 1 kg (undiluted) per sqm of average thickness 1mm over the plastered surface of ceiling and sanding the putty surface with mechanical wall sander having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc complete all as specified and directed.

M&L for Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" / 9" to make the surface free from dust, loose paint etc, by skilled labour and apply two coats of oil bound distemper over one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted / 10 sqm) diluted with water in 1:1 ratio over water proof cement based putty @ 1 kg (undiluted) per sqm of average thickness 1mm over the plastered surface of wall and sanding the putty surface with mechanical wall sander having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc complete all as specified and directed.

M&L for complete removal of existing treatment of wall / ceiling surface by scrapping with mechanical wall sander (having mechanical vacum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7" / 9" to make the surface free from dust, loose paint etc, by skilled labour and apply two coats of premium acrylic smooth exterior emulsion of approved colour with silicon additive & color stay technology, excellent dirt pick up resistance with low VOC less than 50 gram / litre as per the LEEDS specifications, anti algal properties in two coats @ 1.79 litre (undiluted) / 10 sqm diluted with water as per manufacturer instructions applied over one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted) / 10 sqm diluted with water in 1:1 ratio as per manufacturer's instruction complete all as specified and directed.

Notes for item Nos. 154 to 156, 161 to 163: (i) All coats of painting includes putty shall be carried out through airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30m the spray machine should be of reputed manufacturer with proguard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying paint should be able to spray in hard to reach area and penetration of painting on the surface complete. (ii) The flow speed of spray machine as follows: (a) For putty - max 6 litre per min (b) For primer & paint - min 1 ltr per min. (iii) The painting work shall be carried out through authorized applicator through manufacturer of paint is proposed to be used by the contractor. The contractor shall be in possession of "Memorandum of Understanding" (MOU) with at least one of the manufactures mentioned in the contract(list of makes) and the same shall be submitted to GE before commencement of work.

Taking down old U/S Copper/Aluminium point wiring (Light/fan/socket or power socket, bell etc) complete including fixtures and fittings such as switches, cealing roses, pendents, regulators, sockets, light fittings etc for taking credit (credit shall be made as per conditions) and making good the disturbed surfaces of walls, floors, roofs etc complete all as specified and directed

Material and labour for Point wiring with 1.5 Sqmm, single core, PVC insulated, unsheathed, multistranded copper conductor cable, FRLS type, 1100 volts grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit 25mm dia medium grade and conduit accessories concealed in walls, floors except in roofs duly chases cutting groove by chiselling/mechanically as required and making good the disturbed surfaces to match with existing surface and including GI modular boxes flushed in walls covered with modular white cover plates and frames of required size fixed with cadmium plated iron screws for mounting of modular switches, sockets, regulators etc and including 1.5 sqmm FRLS type PVC insulated, unsheathed, multistranded copper conductor green in colour cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for following :

(a) One light point, ceiling fan/ exhaust fan point controlled by one, one-way switch.

(b) One call bell point controlled by one bell push.

(c) One 5pin socket outlet point controlled by one 5 Amps switch on the same board

(d) One 5pin socket outlet point controlled by one 5 Amps switch on independent board

(e) One light point controlled by two, 2-way switches

All as per item No 165 above, but wiring with 2.5 sqmm and earh continuity conductor with 2.5 sqmm for 6 pin15 amps socket out let point on independent board

Supply and Fix modular switch single pole, one way, 6 Amps, 240 volts, one module complete all as specified and directed.

Supply and Fix modular switch 6 Amps, single pole, 2-way, 240 volts, one module complete all as specified and directed.

Supply and Fix modular socket out let, 5 Pin 6 Amps, two module, 240 volts complete all as specified and directed.

Supply and Fix modular switch, single pole, one way,16 Amps, 240 volts, one module complete all as specified and directed.

Supply and Fix modular socket outlet 6pin 6A/16 Amps, 240 volts, two module complete all as specified and directed.

Supply and Fix modular fan regulator electronic type, 230 Volts, stepped type 120 Watts, two module complete all as specified and directed.

Supply and Fix Ceiling rose surface bakelite 65 x 50 mm, three terminals 230 volts, AC complete all as specified and directed.

Supply and Fix Call Bell ding dong type, 230 Volts, AC and fixing on suitable base plate complete all as specified and directed.

Supply and Fix modular type Bell push 5 Amp, 240 volts, one module complete all as specified and directed.

Supply and Fix VTPN MCB DB 6 way, 415 V, 50Hz, AC suitable for MCB incomer type and MCB TP/SP as outgoings, double door, IP 43 protection with 200 Amps busbar, earth bar complete with powder coated painting and fixing in flush with wall and making electrical connections using suitable sizes of thimble copper lugs etc including removing old DB and making good to match with existing surface complete all as specified and as directed .

Supply and Fix MCB 63 Amps, FP, 415 V, 10 KA 'C' curve complete all as specified and directed.

Supply and fix MCB DB SPN 8 way, 240V, 50Hz sheet metal enclosure double door type IP-43 protection, factory made powder coated painting and tinned copper bus bar neutral link including taking down old one all as specifed and directed.

Supply and Fix MCB DP 40 Amps,10 KA C curve, 240 volts 50 Hz AC including taking down old item complete all as specified and directed.

Supply and Fix MCB SP 6 to 32 Amp 10 KA C curve, 240 volts 50 Hz AC including taking down old one complete all as specified and directed.

Material and labour for submain wiring with 2 run of 4 Sqmm, single core, PVC insulated, unsheathed, multistranded copper conductor cable, FRLS type, 1100 volts grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit 25mm dia medium grade and conduit accessories concealed in walls, floors except in roofs duly chases cutting groove by chiselling/mechanically as required and making good the disturbed surfaces to match with existing surface including 1run of 4 sqmm PVC insulated, single core, unsheathed, multistranded copper conductor green in colour cable, FRLS type, 1100 volts grade as earth continuity conductor and connecting to common earth dolly including taking down old item all as specified and directed. Note :- 2 run of 4 sqmm copper conductor and 1 run of 4 sqmm copper conductor and 1 run of PVC conduit shall be measured as one unit.

Material and labour for submain wiring with 2 run of 6 Sqmm, single core, PVC insulated, unsheathed, multistranded copper conductor cable, FRLS type, 1100 volts grade conforming to IS-694 drawn through in and including non-metallic rigid PVC conduit 25mm dia medium grade and conduit accessories concealed in walls, floors except in roofs duly chases cutting groove by chiselling/mechanically as required and making good the disturbed surfaces to match with existing surface including 1run of 6 sqmm PVC insulated, single core, unsheathed, multistranded copper conductor green in colour cable, FRLS type, 1100 volts grade as earth continuity conductor and connecting to common earth dolly including taking down old item all as specified and directed. Note :- 2 run of 6 sqmm copper conductor and 1 run of 6 sqmm copper conductor and 1 run of PVC conduit shall be measured as one unit.

Supply and fix sheet metal enclosure with a two pin and earth plug and socket including taking down old one complete with MCB SP 20A, 10 KA 'C' curve, 240V, 50 Hz, AC

Supply and fix ceiling fan 1200mm sweep, BLDC 26 watt, white in colour, 230V AC 50 Hz including taking down old ceiling fan and depositing the same in E/M store yard, complete with blades, down rod, canopy, 5 star rated and making electric connection by providing 3 core copper cable from ceiling rose to fan all as specified and directed.

Supply and Fix wall mounted LED tube light fitting 20 Watt (4 ft length) housing made of aluminium extrusion with high efficient LEDS & OPAL DIFFUSER with both input AC connection with high lumen output, environment friendly energy efficient LED with accessories, IP 20 protection Class I, system electrical efficiency 85%, system efficacy> 100 lm/watt, operating voltage between 140-270v, AC 50 Hz , TDH 10%, POWER FACTOR>=0.95, SURGE PROTECTION 2.5 KV, COLOUIR TEMPERATURE 5700 K, CRI>80 integral drivers, complete with diffuser, polyester louver with 20 watt LED tube & integrated electronic driver 20 watt including taking down old unserviceable FTL/CFL fitting all as specified and directed.

Supply and Fix wall mounted LED tube light fitting 10 Watt (2 ft length) housing made of aluminium extrusion with high efficient LEDS & OPAL DIFFUSER with both input AC connection with high lumen output, environment friendly energy efficient LED with accessories, IP 20 protection Class I, system electrical efficiency 85%, system efficacy> 100 lm/watt, operating voltage between 140-270v, AC 50 Hz , TDH 10%, POWER FACTOR>=0.95, SURGE PROTECTION 2.5 KV, COLOUIR TEMPERATURE 5700 K, CRI>80 integral drivers, complete with diffuser, polyester louver with 10 watt LED tube & integrated electronic driver 10 watt including taking down old unserviceable FTL/CFL fitting all as specified and directed.

Supply and fix LED street light fitting 36 W made up of die cast housing with toughend glass and high power LEDs complete with IP 65 protection duly pre-wired and fixing arrangement on wall surface at suitable height by providing GI bracket medium grade of suitble size and adequate length with necessary fixing clamps and making electric connections by providing 3 core copper conductor cable from ceiling rose to light fitting all as specified and directed.

Supply and Fix Lamp holder suitable for B22 bulb PVC/ polycarbonate type with back plate suitable for batten fittings and fixing on base plate complete all as specified and directed.

Supply and fix LED bulb B22 type 18 Watt, 230 V complete all as specified and directed.

Supply and Fix LED light fitting with decorative wall mounting brushed nickel finish fixture with Opal Glass diffuser including LED lamp 9 W, 240V, B22 type and making electric connections by providing 3 core copper conductor cable complete all as specified and directed.

Supply and Fix exhaust fan 300 mm sweep metallic body single phase 230 V AC 50 Hz fixed on SS wire meshed surface complete including making hole on the wall at suitable height making electric connections by providing 3 core copper conductor cable and removing Old U/S Exhautst fan and shall be deposited in MES store yard complete all as specified and directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6.3 mm thick buried in ground vertically to a depth not less than 2.25 metres below normal ground level with top edge of earth plate not less than 1.5 metres below normal ground level including earth lead wire GI 4mm dia connected galvanised iron earth plate by means of GI bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES SSR Part-I connected to earth test point all as specified or indicated including testing on completion with and including 15 mm bore light grade GI protection pipe 7.5 metres long including PCC 1:2:4 pit with pre-cast RCC 1:2:4 type B1 cover 40 mm thick reinforced with 6mm dia MS bars @ 100mm both ways with lifting hook made out of 6mm dia MS bars watering arrangement pipe of 20mm dia medium grade with wire mesh funnel andproviding common salt and charcoal filling all around earth plate upto 15cm thick and necessary excavation and earth work in any type of soil and returning filling of soil, removing surplus soil etc complete all as specified and directed

Supply and fix Microprocessor based electronic energy meters domestic type 10-60 Amps, AC, single phase conforming to IS-13779 or amended upto date, digital type, static energy meter of latest accuracy class suitable for working on 240 volt, 50 Hz with back lit LCD display with special features like TOD, tamper logging, optical communication port & display in absence of power all as per sample all as specified and directed. Note : The quoted rate is deemed to be inclusive of providing 3mm thick hylum sheet mounting plate of siutable size (to be provided inside the meter box of MS sheet ) as per manufacturer's instructions including drilling holes of suitable size, fixed with screws wooden guttas etc, including connecting and testing by switching on prevailing load for atteast 4 Hrs and recording the reading on hourly basis and removing Old U/S energy meter shall be deposited in MES store yard all as specified and directed.

Supply and fix electric water heater(Geyser) storage type steel body of capacity 25 Ltrs comprising of copper inner tank of BEE 5 Star rated complete with all accessories and components such as safety valve, thermostat, NRV, PVC connections (cold and Hot) and necessary fixing arrangements on wall at suitable height with nut and bolts, washers etc embedded in wall and making electric connections by providing 3 core copper conductor cable all as specified Note :- Taking down Old geyser and to be deposited to E/M store.

Material and labour for GI pipe light grade 15mm bore for earth wire protection all as specified and directed.

Earth continuity conductor 4 mm dia galvanised iron or steel wire fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing or main earth wire all as specified and directed.

Supply and fixing non-metallic rigid PVC conduit 25mm dia medium grade ith conduit accessories concealed in walls, floors etc and providing fish wire in conduiut to draw TV/Teleohone wire including chases cutting all as specified and directed.

Material and labour for taking down and dismantling old ceiling fan from any position of any make/ size and carrying out servicing and overhauling including replacement of capacitor, bearings, bush, shaft, rubber reel assembly, canopy and minor parts as required including one coat of spray painting of existing shade, marking MES No with black paint and refixing the same and making electric connections by providing 3 core copper conductor cable from ceilng rose to fan all as specified and directed

Sri Lakshmi Constructions

M/s M Munivenkatappa and Company

SIGNATURE INFRASTRUCTURES(E DHARANI KUMAR REDDY)

Sai Ram Builders

Phoenix Infra

Lucky Enterprises