M/o completed scheme finishing and furnishing i/c T.C. etc. complete at Vikas Sadan.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in- Charge.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. a)With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (a) Two coat

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. a)One coat

French spirit polishing: a) two or more coat on new work including a coat of wood filler

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: A) One or more coats on old work

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality. a) 1.0 mm thick.

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete.

Providing and fixing table top glass of 10 mm thick of any colour i/c cutting of required shape and sizes, moulding, edge bevelling, creating hole etc. as per the direction of the Engineer-in-charge.

Providing and fixing roller blinds of Lush blackout fabric 100% polyster, thickness 0.33mm(+0.05mm), weight 310gms/sqm (+5%) of make Approved make Mac, D-Decor, Hunter Douglas, Marvel, VISTA, DECK & Areolux or equivalent brand, of required shade and including head rails with fixed movement chain, PVC hook, cabs, top channel, bottom roller etc. all complete whenever required as per direction of Engineer-in-charge. (Measurements of fabric will be taken only for the purpose of payments).

Providing & fixing (Zebra) blinds Essence range with pelmet of white powder coated. Aluminium alloy Extruded rail. Size 75.6X12mm; weight=480 gms /running mtr. Roller tube of anodized aluminium alloy extruded grooved tube. Size:40mm outside diameter (+2%); weight=220gms/running mtr. Control unit made of high strength reinforced plastic with beaded endless chain of 4.5mm plastic beads molded on 2.0mm thick polyster cord with pitch of the beads is 6mm. bottom rail made up of white powder coated high strength aluminium alloy extruded tube, size:51+1mm Width; Weight= 215gms /running mtr (+5%) Valance Rail of white powder coated aluminium extruded alloy, which is size:84.5+1mm, Width; Weight= 320gms/running mtr. (+1mm). Fabric:100% polyster, Fabric width:125-180 GSM, Fabric thickness :0.39-0.43mm, Fabric colour fastness to light. Approved make Mac, D-Decor, Hunter Douglas, Marvel, VISTA, DECK & Areolux or eqivalent brand. (Measurements of fabric will be taken only for the purpose of payments).

Providing and laying in position cement concrete of specific grade excluding the cost of centering and shuttering a) 1:1½:3 (1 cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 10 mm nominal size derived from natural sources).

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. A) With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.

Providing & fixing false ceiling at all heights with 12 mm thick pin hole mineral fibre square edged ceiling tiles 595x595mm to be laid in true horizontal level suspended on inter-locking metal T-Grid comprising of main-T runners, cross - T of length 1200 mm and secondary intermediate cross-T of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. (Note- Tiles, Main-T, Cross-T, secondary intermediate cross-T, Perimeter wall angle will be provided by Department i.e. serviceable material taken out after dismantling from A block corridors)

Modified Estimated Cost after using Correction Factor on DSR-2023 on account of [email protected]

Add Cost index @3%on excepted item no.12,13,14 i.e. on 2369172.67

Please Enable Macros to View BoQ information