Chain link fencing around Helipad at Sindu Ghat

Amount

Earth work in excavati..;n by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars

Centring and shuttermg including strutting, propping etc. and removal of form for·Foundations: footings, bases of columns etc. for mass concrete.

Centring and shuttermg including strutting, propping etc. and removal of form for·Columns, Pillars, Piers, Abutments, Pos ts and Strut

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 coarse sand)

Strctural steel work in single section fixed with connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G. I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge.Made of G. I. wire of dia 4mm

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) upto 3m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. stud tied with G.l. staples and G.l. clips to retain horizontal including necessary bolts or G.l. barbed wire tied to angle iron all complete as per direction of Engineer -in-charge with reinforced barbed tape (R.B.T.) I Spring core (2.5mm thick) wire of high tensile strength of 165kg/ sq.mm with tape (0.52mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid'' separately)

Carriage of cement and Reinforcement steel by mechanical trasnport from average lead upto 5 km

Carriage of sand and coarse Aggregate by mechanical trasnport from average lead up to 10

M/S SONAM TASHI GOVT CONTRACTOR

Aggxima Entrprise

M/S LADAKH STEEL INDUSTRY