SPL REPAIR TO BLDG NO TML 48 PANDEY HALL AT THE INF SCHOOL UNDER GE MIS MHOW

Amount

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material outside cantt area all as specified and directed by Engr-in-Charge. Note: Work will be carried out in patches upto triple storey.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and directed .

M&L for rendering 15mm thick in CM 1:4 in on fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and directed . (Including all necessary scaffolding lifiting arrangement for external surfaces up to 15.00m height).

Dismantling floors hearth or wall tilling including cement mortor bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and directed .

M&L for Non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed .

M&L for Glazed ceramic coloured tiles 300x450x7 to 8 mm thick on vertical surface as in skirting,dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10 mm thick screed in CM 1:4 complete all as specified and directed .

M&L for vitrified ceramic tiles flooring (Dark shade) 10mm thick (Square/Rectangular) polished area of each tiles exceeding 0.42 Sqm but not exeeding 1.00 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick sreed bed in CM (1:4) complete all as specified and as directed

M&L for vitrified ceramic tiles Dado/Skirting (Dark shade) 10mm thick (Square/Rectangular) polished area of each tiles exceeding 0.42 Sqm but not exeeding 1.00 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick sreed bed in CM (1:4) complete all as specified and as directed

Rougening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed

M&L for Granite 20mm thick (any colour)(tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in colour cement 1;2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screedbed in cm1:4 edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed

M&L for 25 mm thick plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in levelling course complete all as specified and as directed

M&L 75 mm thick Cement concrete type D- 2, 1:4:8 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and as directed

Demolition of brick work built in cement mortar incl all quoins arches pillars etc. complete all as specified and as directed

M&L for brick work with fly ash bricks modular size straight or curved on plan exc. 6.00m mean radius built in CM(1:6) complete all as specified and as directed

All as per item No 16.00 above but except bricks. Note: Old serviceable brick shall be re-used

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed

M&L for Plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregates as in copings etc. and in similar works including weathering,slightly rounded or chamfered angles and throating and necessary form works,all as specified.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames ) not exc 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish(without any extra cost to Govt), & removing from site all as specified and directed by Engr-in-charge

All as per item No 21.00 above but exc 1.50 sqm and not exc 4 sqm each.

S&F factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 Nos 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer & tarring back of chowkats and holdfasts complete all as specified and as directed

All as per item No 23.00 above but frame size125x60mm complete all as specified and as directed

S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F mild steel butt hings medium weight 75 mm long complete all as specified and as directed

S&F 30mm thick Flush shutters, soild core construction, with particle board core and plywood face panels, both faces are covered with decorative face veener with lipping/frame to match complete, all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made 2nd class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats complete all as specified and as directed

S&F mild steel butt hings medium weight 100 mm long complete all as specified and as directed

S&F Aluminium handle cast type, anodised size 150mm long, D type complete all as specified and as directed

S&F Aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm complete all as specified and as directed

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

Taking down aluminium chowkhats or frame with shutter exc 4.00 Sqm complete all as specified and as directed

S&F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of chowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick. (e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 5mm thick tinted glass make Modi, float . (g) Stainless steel Grade 304 handle eisc type -02 Nos per shutter ( inside & out side). (h) Stainless steel Grade 304 door stopper heavy duty-01 Nos per shutter. (i) Stainless steel Grade 304 tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality, Hydraulic floor spring make and type as approved by GE openable both from inside & out side -01 Nos per shutter complete. Note : Febrication of aluminum door shall be done by authoried fabricator.

S&F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) with following specification and making good the adjacent side of jambs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required (Make : Jindal/Hindalco or Equivalent) complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

M&L for powder coated aluminium frame for doors, windows, ventilators, grills etc with one or more rebates including joining cleat for fixing etc. and fixing in position complete all as specified and directed at site.

M&L for powder coated aluminium section/angle/Tee etc in covering of nosing of steps etc including fixing with suitable length of SS screws/fastner/rebates, joining cleat for fixing and necessary adhesive etc. and fixing in position complete all as specified and directed at site.

S&F in repairs double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Repair to Aluminium door including adjusting , necessary bedding, clip, rubber beader, repair to floor door closer complete all as directed by Engr-in-Charge.

S&F in repairs Aluminium (extruded section) body door closer hydraullicaly regulated designation No 2, universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 and 60kg complete all as specified and directed.

Dismanting Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves gutter etc, fixed with self tapping screws complete all as specified and directed.

Refixing Pre- painted galvalume aluminum any type as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/eaves gutter/valley for rain water etc fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantling 40 sq cm and over in section framed work of any description complete all as specified and directed.

S&F structural steel works of Fe 410W (Gde E 250) quality A, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication complete all as specified and directed.

Dismantling boarding any description fixed in any position with nail complete all as spd and directed.

S&F anodised aluminium snap grid of 605x605mm size frame work for false ceiling with hangers 6mm dia GI (upto 1200mm length) adujsting level fixed to roof slabs/steel structure by mean of ceiling cleats made out of GI flats 40x3 mm size 60mm long and expansion hod fasteners 12.5 mm dia 40mm long complete all as spd and directed.

S&F 5 mm thick PVC Prelaminated (3D) false ceiling panel of size 600x600mm PVC sheet of density 600 Kg /cbm manufactured by ISO certified company is stuck on both side with adhesive including fixing/inserting in aluminium sanp grid etc complete all as per manufacture's specfication and as directed of Engr-in-Charge.

S&F 5mm thick perforated PVC false ceiling panel of size 600x600mm plain embossed PVC sheet of density 600 Kg /cbm manufactured by ISO certified company is stuck on both side with adhesive including fixing/inserting in aluminium sanp grid etc complete all as per manufacture's specfication and as directed.

S&F in repairs 5mm thick printed any colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions, corner/side lipping inclusive of Solvent Cement and fixing over and including PVC frame work of 5 mm thick PVC sheet fillet of width 35mm for wall panelling, screws etc complete all as specified and directed.

S&F in repairs stainless steel curtain rod, with fixing brackets, side ball stops, rollers, etc complete all as specified and directed.

S&F in repairs 18/19 mm thick Prelaminated Particle board,interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws/nails to timber/steel frame work as in shelves,cup board shutters, book case, writing table stand, shelves etc including fixing of plain fillets square or rectangular of 2nd class hard wood not exc 3 sq.cm in leaping to shutters/shelves complete all as specified and directed.

S&F in repairs Aluminium Hat pegs, solid body, 125mm to 175 mm fixing with screws complete all as specified and directed.

S&F 3mm thick ordinary glass sheet quality and glazing with oil putty in square n. exc 0.5 sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 story building complete all as specified and directed.

All as per item 56.00 above but frosted glass.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm complete all as specified and directed.

S&F in repairs PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle incl. cast iron brackets, PVC flush pipe 32mm dia , 15mm PVC connection 450mm long complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white including P or S trap, fixing bolts, cover, flush pipe and joints complete all as specified and directed.

S&F in repairs vetrious china urinal half stall white coloured with urinal spreader of CP for fixing with 15mm dia pipe,( Minimum weight 60 Gms)Complete including providing and fixing plugs,beeding urinal against wall in cement mortar 1;2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with spreader, flush pipe,grating and union for discharge pipe ( Excluding of fxing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repairs urinal partition with HPL board material 10 to 12 mm thick of size 900x450x350mm fixed with Stainless brackets and screws/fasteners complete all as specified and as directed

S&F in repairs white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste coupling and 32mm PVC waste pipe 900mm long, 15mm PVC connection 450mm long and MS brackets (cutting pinning for inserting brackets) complete all as specified and as directed

S&F in repairs white vitreous china wash basin white (oval shaped under counter) size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting complete all as specified and as directed

S&F in repairs brass CP WHB Mixer (swan neck) of bore dia of pipe 15mm for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs PVC connection 15mm, 450mm long with nuts and washers complete all as specified and directed.

S&F in repairs chromium plated bib tap 15mm size with crutch or butterfly handle screwed down screwed fro iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs push type stop cock of cast copper alloy screwed down high pressure with screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.

S&F angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.

S&F Grating doom 100mm dia without hole chromium plated complete all as specified and directed.

S&F Grating doom 100mm dia with hole,chromium plated complete all as specified and directed.

S&F PVC Waste pipe 32 mm dia and suitable length straight or flexible type for wash hand basin /sink/urinal complete all as specified and directed.

S&F in repairs Tubular towel rail, 20mm dia, D type 60cm long between flanges of brass chromium plated complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner glass shelf of 30mm dia with CP bracket superior quality complete all as specified and directed.

S&F in repairs health fauccet with SS flexible pipe of 1 to 1.50 mtr length including holder/bracket complete all as specified and directed.

S&F in repairs SS Toilet paper holder complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 15 mm bore complete all as specified and directed.

S&F in repairs 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed.

S&F in repairs 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed.

S&F in repairs 40 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed.

S&F in repairs PVC SWR bends of bore 110mm dia complete all as specified and directed.

S&F in repairs PVC SWR bends of bore 75 mm dia complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tank including, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500ltrs including making connections,20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe anf fixed (min wt 210 gram) complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tank including, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ballscrewed for iron pipe anf fixed (min wt 210 gram) complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including prepartion of new wooden surfaces over 10cm width or girth complete all as specified and directed.

M&L for two coat synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface all as specified and directed

M&L for two coats of oil bound distemper to newly plastered surfaces including applying a coat of wall care putty and preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of walls, washing rubbing down and stooping of distempered and painted surfaces and applying two coat of oil bound distemper over a coat of primer including applying 2mm thick wall care putty wall putty complete all as specified and directed.

M&L for complete removal of existing treatment of external walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc applying two coats of walls with Acrylic Smooth exterior paint of required shade in old plastered surface (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Including all necessary scaffolding lifiting arrangement upto 12.00m height) complete all as specified and directed.

M&L for preparation of newly plastered walls surfaces including cornices, pillasters and applying two coats of walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Including all necessary scaffolding lifiting arrangement upto 12 mtr height ) complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, sub base etc complete all as specified and directed.

M&L for machine pressed coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over compacted dry sand and jointed with coloured cement slurry and pigment complete all as specified and directed. Note: Sand cushioning shall be measured and paid separately.

M&L for sand filling/stone dust under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for precast factory made cement concete block (Kerb stone) type B1 1:2:4 (using 20mm graded stone aggregate) fixed dry mortar complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on concrete surface over coat of primer including prepartion of new surface over 10cm width or girth complete all as specified and as directed.

S&F in repairs precast RCC jalli of reinforced cement concrete type B1 using 12.5mm stone aggregate louvres and jallies, 25mm thick (measured solid) set in CM 1:4, including all mouldings, reinforcement, from work etc complete all as specified and as directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fittings complete etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc. complete all as specified and as directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.

Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including taking down old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm IS marked inclusive of tees bend elbows etc upto and including modular sunken anodised steel box for housing modular switch socket, regulator etc including modular cover plate and cover frame of any module ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for the following:-

(a) One light/fan point controlled by one, one way switch 5 Amps

(b) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

All as per item No. 108.00 above but using 2.5 sq. mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq. mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

All as per item No. 108.00 above but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of 4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S&F Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified.

S&F Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified.

S&F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S&F ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro/Philips as approved by GE.

S&F in repairs decorative ultra slim LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps complete all as specified and as directed. Make: Cat No LHEXACP7IN1W010 of Havells or equivalent make in Wipro/Philips/Bajaj as approved by GE.

S&F in repairs LED ceiling light fittings 34/36 watt recess mounting type 2x2 luminaire, 6000k complete with driver duly connection wire etc complete all as specified and as directed. Make:- Jaguar Cat No. LSVR01S036XC, Crompton Cat No. LCTLRN-36-FO-CDL, Bajaj Cat Pt No. BZRSQL 36W GZ1 WH or equivalent in Havells/ Wipro/Philips as approved by GE.

S&F Verticle Decorative wall mounted two way 10 watt LED light fitting, 600Lumen, warm light made out of polycarbonate/metal complete all as specified and as directed. Make: Bajaj /Havells/ Wipro /Philips

S&F in repairs post top lantern LED Type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. Make: Bajaj cat Pt No. BGCTNP20W LED WH/WW 18WH or equivalent in Havells/ Wipro/Philips as approved by GE.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make:- Cat No ENXT P 36L WH CR PC SD of Bajaj or equivalent make in Philips/Wipro/Havells as approved by GE.

M&L for sub main wiring with 04 runs of 6 sqmm main wire along with 02 run of 06 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including rigid non-metallic PVC concealed conduit (medium grade) not less than 32mm dia with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same complete all as specified and directed. NOTE:- Four runs of main copper conductor, two run of earth wire, one run of PVC conduit and cutting chasing including making good shall be measured as one unit length. Make of cable - Havells / Finolex / RR Kabel Ltd. / L&T Make of PVC Conduit( FRLS) - Presto Plast / Finolex / Jindal / Asian / AKG

S&F in repairs double door TPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

S&F in repairs double door SPN DBs 12 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

S&F in repairs MCB TP 25 to 63 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F in repairs MCB TPN 40 to 100 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F MCB SPN 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F exhaust fan of PVC body 250 mm sweep ventil air DX green type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windows including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in quoted rate).

M&L for Earthing complete (in replacement) with galvanized steel earth plate electrode 60cm x 60cmx 6 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.3 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C-1 with 40 mm thick RCC 1:2:4 type B-J cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed including testing on completion.. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

sunway associates (BID ID -3339987)

M/S UnitedConstruction (BID ID -3340108)

Goyal Construction (BID ID -3332191)

Jamna Constructions (BID ID -3340003)

SATHI ENTERPRISES (BID ID -3339922)