Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.1 LAccepted-AOC 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹20.9 L+₹3,217.20 (0.15%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹22.7 L+₹1.8 L (8.54%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹30.9 L+₹10.1 L (48.2%)Rejected-Finance 2 EVEREST VIHAR PT T N MISHRA MARG NIRMAN NAGAR JAIPUR 302019 | JAIPUR | RAJASTHAN | 302019 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
26 Jun 2020, 6:00 pmClosed
GE AF UTARLAI
GARRISON ENGINEER AIR FORCE UTARLAI PB NO 11 BARMER (RAJ) PIN 344001
REPAIR TO STREET LIGHT, HIGH MAST LIGHT, PATHWAY LIGHT, POST LAMP LATERN AND CONNECTED WORK AT AF STN UTARLAI
2020_MES_347552_1
8109/03/E8 dt 26 May 2020
Open Tender
Civil Works
Item Rate
180 days
GE AF UTARLAI
As per NIT
7 documents required · 7 mandatory
₹500
GE AF UTARLAI
₹60,000
Yes
14 Aug 2020
26 May 2020
27 Jun 2020
26 May 2020
26 Jun 2020
9 Jun 2020
Amount
M&L for disconnecting and taking down U/S street light fittings of any type/rating from pole or wall dismantling the same for necessary repair or replacment of U/S spars complete and refixing, connecting and testing the same all as specified and directed by Engineer-in-Charge. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley as supply only under respective items of BoQ. (b) T&P required for repair/ maintenance such as ladder, vehicle, manpower etc, shall be included in the quoted rate of this item.
Supply only of copper ballast suitable for HPSV/MH lamp fitting of following wattages. Make : Havells/ Philips/ Crompton Greaves/HPL
Supply only Ignitor suitable for HPSV lamp fitting of rating 70/150/250/400 watt
Supply only Surge protection device compatible with industrial & outdoor LED fixtures and model of following ratings:- Make:- Havells/ Philips/ Crompton Greaves/HPL/Bajaj
Suitable for 25 Watt LED fitting
Suitable for 40 Watt LED fitting
Suitable for 70 Watt LED fitting
Suitable for 90 Watt LED fitting
Suitable for 120 Watt LED fitting
Suitable for 150 Watt LED fitting
Suitable for 200 Watt LED fitting
Supply only LED drivers compatible with industrial & outdoor LED fixtures of IS 15885 (Part 2/ Sec 13) or as per existing make and model of following ratings:- Make:- Havells/ Philips/ Crompton Greaves/HPL/Bajaj
Suitable for 25 Watt LED fitting
Suitable for 40 Watt LED fitting
Suitable for 70 Watt LED fitting
Suitable for 90 Watt LED fitting
Suitable for 120 Watt LED fitting
Suitable for 150 Watt LED fitting
Suitable for 200 Watt LED fitting
Supply and fixing of GI pipe bracket light grade of 40mm dia ISI marked duly bent to shape with an angle including clamps, nuts, bolts, washers etc compltete and dismantling of existing old u/s brackets of all as specified and directed by Engineer-in-Charge. (Note: - The total length of the bracket shall be 1.5m)
Supply and fixing in replacement of PVC insulated and over all PVC sheathed, stranded copper conductor wire 1.5 sqmm x 3 core ISI marked.complete from fitting to pole junction box complete all as specified.
M&L for disconnecting jumpers of street light fittings from OH LT line and remove carbon and replace the damaged jumpers refixing, connecting and testing the same complete all as required at site.
S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat stranded conductor of following sizes including taking down old U/S cable:-
2.5 sqmm 2 core
4 sqmm 2 core
10 sqmm, 2 core
S & F in replacement of HDPE junction box of size 32 cm x 23 cm with bus bar mounted on insulators, 10 Amp MCB SP and fixing on poles with MS Clamps and connecting with existing cable all as directed.
M&L for repair and replacment of U/S time switch accessories/ spares including reconnecting and testing complete Note : - Spares/accessories required for replacement shall be measured and paid sepratley under respective items of BoQ.
Supply only time switch analog type, single phase, 230 Volts of rating 20 Amps,
Supply only Nature Switch-02 (sensor) of illuminance level for switching ON is ≤ 30 Lux and for Switching OFF ≥ 10 Lux along with part night operation facility of 4-12 hrs.
Supply only contactor 40 amps, 4 pole, 415 volts fixing with existing box by suitable size of copper cable with suitable size of lugs
Supply only contactor 63 amps, 4 pole, 415 volts fixing with existing box by suitable size of copper cable with suitable size of lugs
Supply only MCB TPN 40 Amps, 415 Volts, 50 Hz AC supply system
Supply only MCB TPN 63 Amps, 415 Volts, 50 Hz AC supply system
M & L in repairs for lowering of high mast lantern carriage for disconnecting and taking down U/S high mast light fittings of any type/rating dismantling the same for necessary repair or replacment of U/S spares and refixing, connecting, testing including raising high mast lantern carriage to its original position complete all as required at site and directed by Engineer-in-Charge. Notes:- (a) Spares/accessories required for replacement shall be measured and paid sepratley under respective items of BoQ. (b) T&P required for repair/ maintenance such as ladder, vehicle, menpower etc, shall be included in the quoted rate of this item.
Supply and fixing in replacement of 70/72 watt LED street light of new generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source with IP65 protection suitable upto 40 mm mounting pipe as directed by engineer-in-charge. Make: Havells/Philips/Wipro/ Crompton
Supply and fixing in replacement of 70 watt LED flood light, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light, suitable for highlighting architectural facade and general purpose lighting. Make: Havells/ Philips/Wipro/ Crompton
Supply and fixing in replacement of 60 watt LED street light energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source with IP65 protection as directed by Engineer-in-Charge. Make: Havells/ Philips/ Wipro/ Crompton
Supply and fixing in replacement of 45 watt LED street light energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source with IP65 protection as directed by Engineer-in-Charge. Make: Havells/ Philips/ Wipro/ Crompton
Supply and fixing in replacement of 25 watt LED street light energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source with IP65 protection as directed by Engineer-in-Charge. Make: Havells/ Philips/ Wipro/ Crompton
Supply install and testing in replacement of out door wheather proof bus bar chamber of size 80 cm x 30 cm x 25 cm made out of 18 SWG MS sheet having one side openable hinged door shuter with looking arangement mounted on 40x40x6mm anlge iron frame with legs welded and 04 nos copper bus bar of 400 Amp rating provn of one MCCB TPN 100 Amp 16 KA for controlling Electric supply complete erracted on ground with necessary PCC 1:3:6 type C2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland , lugs/thimbles all as specified. NOTE: Cost of dismantling/ taking down old unserviceable bus bar chamber shall be included in the quotedd rate of this item.
Labour only for removing and taking out existing underground LT Cable from trenches or pole or underground in pipe duct carefully cleaning of the same for relaying incase serviceable cable complete all as specified and directed.
185 Sqmm 3.5 core
150 Sqmm 3.5 core
120 Sqmm 3.5 core
95 Sqmm 3.5 core
70 Sqmm 3.5 core
50 Sqmm 3.5 core
25 Sqmm 3.5 core /4 core
16 Sqmm 2 core
10 Sqmm 2 core
Relaying, Jointing and testing only of underground armoured cable LT XLPE insulated cable 1100 Volts PVC bedded aluminium conductor cable received from item no 07 here in above Complete all as directed by Engineer-in-Charge.
185 Sqmm 3.5 core
150 Sqmm 3.5 core
120 Sqmm 3.5 core
95 Sqmm 3.5 core
70 Sqmm 3.5 core
50 Sqmm 3.5 core
25 Sqmm 3.5 core /4 core
16 Sqmm 2 core
10 Sqmm 2 core
Supply & Laying, Jointing and testing in replacement underground armoured cable LT XLPE insulated cable 1100 Volts PVC bedded galvanised steel strip or wire armoured electric LT UG cable heavy duty with multi stranded aluminium conductor laid in trenches/walls/ducts passing through pipe cable of following size Complete all as specified
185 Sqmm 3.5 core
150 Sqmm 3.5 core
120 Sqmm 3.5 core
95 Sqmm 3.5 core
70 Sqmm 3.5 core
50 Sqmm 3.5 core
25 Sqmm 4 core
16 Sqmm 2 core
10 Sqmm 2 core
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 mtr depth for laying of cable and getting out in any type of soil.
Excavation in trenches for each additional 1.5 Mtr or part thereof in depth beyond the first 1.5 Mtr for laying of cable and getting out in any tyoe of soil.
Removing of excavated surplus soil not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point.
Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm thick.
M & L for sand cushioning to all around the cable protection of natural Tibba sand all as directed. (Note : Punning thickness will be measured and paid for payment purpose.)
S & F stone patti quarry faced Jodhpur type 4 to 5 cm thick and 25 to 30 cm wide putting on cable abutting to each other for cable protection all as directed.
Labour only for laying only serviceable stone patti obtained from item No 23 for protection of cable all as directed.
M & L in replacement of pre-stressed concrete pole 9 Mtr long 102 mm X 172 mm at top and 102 X 279 mm at bottom class 10, complete all as directed by Engineer-in-Charge. Note : Excavation & PCC will be measured and paid separately.
M & L PCC 1:4:8 type C2 using 40 mm graded stone aggregate for foundation of pole. Complete all as directed by Engineer-in-Charge.
M & L PCC 1:3:6 type C1 using 20 mm graded stone aggregate for pedestal of pole coping includinf formwork. Complete all as directed by Engineer-in-Charge.
Labour only for trimming/cutting of tree branches touching HT/LT overhead lines wide growth around poles and making clear span of 2m all around OH line with pole and plants all as directed by Engineer-in-Charge.
S & F in replacement MCB 10 Amp, single pole curve 'C' , 230 Volt 10 KA,
Supply and laying in replacement of light grade galvanised steel tube 40mm bore light grade for protection of cable complete all as directed by Engineer-in-Charge.
Supply and fixing of LT cable route indicator cast iron of suitable size mounted on 40 x 40 x 3 mm angle iron with height of 1.5 metre along with LT cable trench including planting in ground with PCC complete all as specified and directed.by Engr-in-Charge.
Labour for drilling hole under road for laying of U/G cable through pipe of suitable size complete all as specified and directed at site.
Supply, install, testing and commissioning in replacement of factory made and tested (including CPRI type test certified) LT feeder pillar box (KIOSK) out door type, floor mounted, compartmantalised and IP-54 suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars installed on porcelain insulators. The panel shall be dust and vermin proof, made of 3.15mm thick CRCA MS sheet and with base frame of 40x40x6mm angle iron , powder coated, Front and rear opening type with aprons for cable entry with double door shutter and locking arrangement with and including following items. (Location- Central Park) NOTE: Cost of dismantling/ taking down old unserviceable LT feeder piller box shall be included in the quotedd rate of this item. Incoming (a) MCCB 100 amps, 4 pole, 25 KA, 415 volts grade, with thermal magnetic - 01 No (b) Bus bar electrolytic grade copper and supported on Non-hygroscopic, non carbonising, corrosion resistance SMC insulators 300 Amp, 4 pole, mounted on insulators for incomming supply - 01 Set. (c) Volt meter and Amp meter 415 volts, 50 Hz AC supply -01 set. (d) Neon indicating lamps (R, Y & B) -01` Set. Outgoing (a) MCB TPN 63 amps, 4 pole, 10 KA , 415 volts, 50 Hz - 01 No. (b) MCB SPN 40 amps, 10 KA , 230 volts- 03 Nos.
Surface Dressing / Cleaning of Surrounding Area of Two Pole / Four Pole / Sub Stn structure including removing of tree brances, small trees plants bushes etc complete all as directed by Engr-in-Charge
M&L for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20X15 cm size complete all as directed by Engr-in-Charge
Single-Phase load of 5kW (Swadeep-02EC5kW1P) with Contactor, Incoming MCB & Outgoing MCB rating of 40-63 Amps & main load Circuit Wiring of min. 10 sq.mm. Make of Nature Switch: Kakatiya Energy Systems/ BAJAJ/ Healer, Contactors: BCH/ L&T/ Schneider, MCBs: HAGER/Schneider/L&T (Exora/AU series) /C&S, Enclosure & Circuit Sheet: Sintex or equivalent, Circuit Wiring: Polycab/Finolex or equivalent. Contactor should Conform to IEC-60947-4-1 / IS-13947-4-1 and MCBs should Conform to IEC-60898 / IS-8828
Three-Phase load of 12kW (Swadeep-02EC12kW1P) with Contactor, Incoming MCB & Outgoing MCB rating of 40-63 Amps & main load Circuit Wiring of min. 10 sq.mm. Make of Nature Switch: Kakatiya Energy Systems/ BAJAJ/ Healer, Contactors: BCH/ L&T/ Schneider, MCBs: HAGER/Schneider/L&T (Exora/AU series) /C&S, Enclosure & Circuit Sheet: Sintex or equivalent, Circuit Wiring: Polycab/Finolex or equivalent. Contactor should Conform to IEC-60947-4-1 / IS-13947-4-1 and MCBs should Conform to IEC-60898 / IS-8828
Supply and Fixing in replacement of 9 watt pathway LED bollard light with opel arylic diffuser and IP 65 protection including cable connection to UG cable using 1.5 sqmm PVC insulated PVC sheathed 1100 V grade twin core copper conductor wire all as directed by Engr-in-Charge all as per Bajaj ordering product code No. 111284, Model;- Tulip, Cat No. BGBOM 650 9W LED or quivalent in Havells/Philips/wipro /crompton Greaves.
Supply and fixing in replacement of LED aviation obstruction light comprising of aluminium housing with polycarbonate enclosure all as per Bajaj product code 110731 luminaire type BGAV302 LED or equivalent of approved make including all necessary fitting accessories and LED lamps complete all as directed.
S&F in replacement of post top lantern light "MAPLE" decorative post top for 360 degree indirect light IP 65 protection resistant to impact and corrosion . Glare-free and better uniformity. 40 watt LED 230 V 50 Hz including necessry fitting accessories complete allas per Crompton cat No. LPTO-40-CDl or equivalent Philips/Wipro/Havells
Godara Construction and General Suppliers
M.D. CONSTRUCTION CO.
Rasam Engg Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .