PROVN OF OTM ACCN FOR INFO BN (PHASE-II)

Amount

BUILDINGS & STRUCTURE (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for “BUILDINGS & STRUCTURE” as listed in Schedule ‘A’ Part-I. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 41,82,23,000.00 inserted by the MES in Schedule ‘A’ Part-I.

SITE CLEARANCE AND SITE DEVELOPMENT INCLUDING EARTHWORK AND EXCAVATION (Sch 'A' PART-II)

Lump sum price worked out by the Contractor for “SITE CLEARANCE AND SITE DEVELOPMENT INCLUDING EARTHWORK AND EXCAVATION” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 1,36,30,963.61 inserted by the MES in Schedule ‘A’ Part-II.

INTERNAL WATER SUPPLY (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 10,45,912.99 inserted by the MES in Schedule ‘A’ Part-III.

INTERNAL ELECTRIFICATION (Sch 'A' PART-IV)

Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 62,03,657.45 inserted by the MES in Schedule ‘A’ Part-IV.

EXTERNAL WATER SUPPLY (Sch 'A' Part-V)

Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY)” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 19,76,973.17 inserted by the MES in Schedule ‘A’ Part-V.

EXTERNAL ELECTRIC SUPPLY (Sch 'A' Part-VI)

Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIC SUPPLY)” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 44,38,119.68 inserted by the MES in Schedule ‘A’ Part-VI.

ROAD, PATH & CULVERT (Sch 'A' Part-VII)

Lump sum price worked out by the Contractor for “(ROAD, PATH & CULVERT )” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 1,47,40,757.79 inserted by the MES in Schedule ‘A’ Part-VII.

COMPOUND WALL, FENCING & GATE (Sch 'A' PART-VIII)

Lump sum price worked out by the Contractor for “(COMPOUND WALL, FENCING & GATE)” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 7,20,786.76 inserted by the MES in Schedule ‘A’ Part-VIII.

AREA DRAINAGE (Sch 'A' Part-IX)

Lump sum price worked out by the Contractor for “(AREA DRAINAGE )” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 60,47,928.94 inserted by the MES in Schedule ‘A’ Part-IX.

SEWAGE DISPOSAL (Sch 'A' Part-X)

Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)” as listed in Schedule ‘A’ Part-X. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 12,91,622.85 inserted by the MES in Schedule ‘A’ Part-X.

LIGHTNING PROTECTION (Sch 'A' Part-XI)

Lump sum price worked out by the Contractor for “(LIGHTNING PROTECTION)” as listed in Schedule ‘A’ Part-XI. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 3,41,476.60 inserted by the MES in Schedule ‘A’ Part-XI.

SOLAR WATER HEATER (Sch 'A' Part-XII)

Lump sum price worked out by the Contractor for “(SOLAR WATER HEATER)” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 11,61,267.83 inserted by the MES in Schedule ‘A’ Part-XII.

RCC RETAINING WALL (Sch 'A' Part-XIII)

Lump sum price worked out by the Contractor for “(RCC RETAINING WALL)” as listed in Schedule ‘A’ Part-XIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 27,78,503.95 inserted by the MES in Schedule ‘A’ Part-XIII.

(SCHEDULE 'A' PART-XIV) BLANK

DEMOLITION OF EXTISTING BUILDING (Sch 'A' Part-XV)

Lump sum price worked out by the Contractor for “(DEMOLITION OF EXTISTING BUILDING)” as listed in Schedule ‘A’ Part-XV. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 12,98,281.91 inserted by the MES in Schedule ‘A’ Part-XV.

DEMOLITION OF INTERNAL ELECTRIFICATION (Sch 'A' Part-XVI)

Lump sum price worked out by the Contractor for “(DEMOLITION OF INTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-XVI. Representing ** ___ % ______ percent *Above / Below the lump sum price of ₹ 99,325.10 inserted by the MES in Schedule ‘A’ Part-XVI.

MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch 'A' Part-XVII)

EXTERNAL WATER SUPPLY S&F sluice valve of 100mm heavy duty, PN - 1.6, ISI Mark flanged ends drilled having stainless steel/brass spindle with cast iron wheel head conforming IS-14846 complete with nuts, bolts, washers, and gaskets complete all as specified and as directed.

S&F sluice valve of 80mm heavy duty, PN - 1.6, ISI Mark flanged ends drilled having stainless steel/brass spindle with cast iron wheel head conforming IS-14846 complete with nuts, bolts, washers, and gaskets complete all as specified and as directed.

M&L for construction of valve pit of internal size 120 cm x 120 cm x 100 cm with one brick thick brick masonary wall in cement mortar (1:4) PCC foundation 15 cm thick (1:4:8) type D-2 with 15 cm offsets, PCC copping 5 cm thick (1:2:4) type B-1, plastering 15 mm thick in cement mortar (1:4), 40x40x6mm angle iron frame and 3mm thick MS sheet cover with locking arrangement including painting to steel surfaces with two coats of synthetic arrangement including painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer and necessary excavation and earth work including dismantling of existing one complete all as specified and as directed.

All as per Item No. 17.03 above but of 90 cm x 90 cm x 60 cm complete all as specified and as directed.

Material & Labour for drilling trial bore of 250 mm dia upto 150 mtrs depth with reverse rotary circulation or direct circulation or combination of both by using power rig for housing of 250mm normal bore reduced to 150mm below ground level, laying in any kinds of soil strata including hard stone boulders etc complete all as specified and as directed. Note: (i) Maximum number of bore wells to be dug not more than 02 Nos including trial bore. (ii) The cost of removal of Mud/Slurry from the site shall be deemed to be included in the unit rate quoted. (iii) The rate quoted is deemed to be include for hire charges of Rig , T&P , Machinery , Fuel charges , labour , consumables, transportation , drilling and operation , sample strata box of suitable size duly painted including use and waste of all necessary appliances and materials in all respects to all entire satisfaction of complete work.

Material & Labour for Development of trial bore by Reaming up to 525 mm for 50 RM from ground level including casing pipe of 250mm dia and thickness 8mm and pea gravel in step from 200mm to 350 mm, from 350mm to 450 mm, from 450mm to 550 mm, from 550mm to 650 mm completed all as specified and directed.

Material & Labour for Development of trial bore by Reaming up to 525 mm from depth exceeding 50 metre to 150 meter including casing pipe of 150mm dia and thickness 8mm and pea gravel in step from 200mm to 350 mm, from 350mm to 450 mm, from 450mm to 550 mm, from 550mm to 650 mm completed all as specified and directed. .

Supply, lowering and fixing/jointing in position 150 mm bore (Low Carbon Galvanised) L.C.G Strainer 3 mtr/6 mtr long with minimum 6 mm thickness each conforming to IS:8110 of 2000 with mild steel socket threaded/by electric arc welding both sides complete all as specified and as directed.

M & L for Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water complete all as specified and as directed.

M & L for Yield test for the bore well by continuously pumping for 16 hours to determine safe pumping yield complete all as specified and as directed.

Supply, lowering and fixing in position MS reducing socket 250 mm x 150 mm nominal bore, 7 mm thick and properly welded to pipe with MS flat iron 75 mm x 6 mm coupler ring including MS iron clamps complete all as specified and as directed.

Supply and Fixing Bail plug, having 3 mtr length and suitable for 150 mm bore 7 mm thick casing pipes complete all as specified and as directed.

Supply and Fixing Well Cap made out of 5 mm thick MS plate suitable to cover 250 mm dia ERW heavy duty MS casing pipe 7mm thick with provision of suitable holes for passing two runs of flat 3 core 6 Sq.mm submersible pumping cable complete all as specified and as directed.

M & L electro logging test of trial bore by authorised Govt. Scientist/agency including submission of test reports duly signed complete all as specified and as directed.

S & F MS heavy duty 100 mm bore pipe 3 mtr long both end flanged with suitable nut bolt, washers and gasket etc complete all as specified and as directed.

Supply, install testing and commissioning submersible pump 12 HP, electric driven 415V, Three phase with discharge capacity 410 PLM at 60 mtr head for 100 mm dia column pipe including tail piece and flange (Casing pipe size) complete all as specified and as directed.

PVC Insulated & Seathed multistranded flexible copper conductor flat cable 1100 volts grade for submersible pump of size 3 core 6 Sqmm completed all specified and as directed.

S&F Nonreturn Valve of size 100mm (4') dia completed all specified and as directed.

Supply and fix valves, sluice, flanges of class 1.6 PN 100 mm (4') dia completed all specified and as directed.

Supply and laying, jointing and testing ductile iron (D) pressure pipes with spigot and socket ends, S/S including specials class "K-9" 100 mm (4") dia completed all specified and as directed.

Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 100 mm dia bore and fixing up in Cast Iron Water supply mains of size 50 mm dia completed all specified and as directed.

Supply and lay pipe Ductile iron, S/S including specials, class 'K-9', 100 mm (4") completed all specified and as directed.

S & F chain pulley block triple spur gear 2 ton capacity with Mtr length manually operated complete with hooks confirming to IS-2429 (Part-I) complete as per site requirement completed all specified and as directed.

Supply, Installation, testing and commissioning of LT feeder pillar board outdoor type cubicle panel board suitable for 3 phase , 4 wire 415 volt 50 hz factory fabricated CPRI type tested powder coated made out of 3.15 mm thick CRCA sheet and MS angle iron section 50x50x6mm frame with front and back open able double door system with locking arrangement louver and air vent gasket for natural air flow of air with canopy, inner compartment made out of 2 mm thick CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arrangements with copper bus bar three phase and neutral suitable capacity marked RED,YELLOW,BLUE and BLACK insulators, made of high strength insulated materials 1100 voltage, bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity, lifting lugs (02 Nos) arrangement to be connect earthing strip at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers. The panel should be chemically treated with 07 tank metal treatment process for anticorrosive treatment. The panel shall be completely dust and vermine proof and degree of protection not less than IP-55 and general construction confirming to IS -1347 epoxy powder coated and the control circuit shall be connected by multi stranded copper conductor flexible wire not less than 1.5 Sqmm in proper colour coding and drawn through in flexible conduit. All internal connection should be made by using copper strip/wire of suitable size and making incoming and outgoing connection using suitable size of gland, thumbing , grouting of the panel to PCC foundation PCC-M10 using 20 mm graded stone aggregate complete with following accessories all as specified and directed.(Borewell Panel) Item Continued as 17.25

EXTERNAL ELECTRIC SUPPLY Material and labour for cutting of bituminous road to 90cm in depth and 60cm in width for laying of GI pipes and making good of cutting area with earth filling, 450mm thick sand filling and finally on top level of the road filling with 250mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) complete all as specified and as directed.

Supply, Installation, testing and commissioning of LT feeder pillar board outdoor type cubicle panel board suitable for 3 phase , 4 wire 415 volt 50 hz factory fabricated CPRI type tested powder coated made out of 3.15 mm thick CRCA sheet and MS angle iron section 50x50x6mm frame with front and back open able double door system with locking arrangement louver and air vent gasket for natural air flow of air with canopy, inner compartment made out of 2 mm thick CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arrangements with aluminum bus bar of cap 160 amps three phase and neutral suitable capacity marked RED,YELLOW,BLUE and BLACK insulators, made of high strength insulated materials 1100 voltage, bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity, lifting lugs (02 Nos), arrangement to be connect earthing strip at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers. The panel should be chemically treated with 07 tank metal treatment process for anticorrosive treatment. The panel shall be completely dust and vermine proof and degree of protection not less than IP-55 and general construction confirming to IS -1347 epoxy powder coated and the control circuit shall be connected by multi stranded copper conductor flexible wire not less than 1.5 Sqmm in proper colour coding and drawn through in flexible conduit. All internal connection should be made by using copper strip/wire of suitable size and making incoming and outgoing connection using suitable size of gland, thimbling, grouting of the panel to PCC foundation PCC-M10 using 20 mm graded stone aggregate complete with following accessories all as specified and directed.(Panel No -01 – Education Bldg/Bn HQ/Santry Post) Item Continued as 17.28

Incoming (a) Incoming MCCB 4P having breaking capacity 35 KA of rating 100A adjustable type thermal magnetic release type with extended terminals – 01 No. (b) Indication lamp LED type (Red, yellow, Blue) -01 set (c) Multifunction meter (KWH, V, A, PF, KVA, KVAR and Maximum Demand KW) – 01 No. Outgoing (d) Outgoing 4P MCCB, 16 KA, 63 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 01 No (e) Outgoing 4P MCCB, 16 KA, 40 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 01 No (f) MCB 4 Pole 415 volts,5 to 32 amps – 01 No

Supply, Installation, testing and commissioning of LT feeder pillar board outdoor type cubicle panel board suitable for 3 phase , 4 wire 415 volt 50 hz factory fabricated CPRI type tested powder coated made out of 3.15 mm thick CRCA sheet and MS angle iron section 50x50x6mm frame with front and back open able double door system with locking arrangement louver and air vent gasket for natural air flow of air with canopy, inner compartment made out of 2 mm thick CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arrangements with aluminium bus bar of cap 300 amps three phase and neutral suitable capacity marked RED,YELLOW,BLUE and BLACK insulators, made of high strength insulated materials 1100 voltage, bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity, lifting lugs (02 Nos) ,arrangement to be connect earthing strip at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers. The panel should be chemically treated with 07 tank metal treatment process for anticorrosive treatment. The panel shall be completely dust and vermine proof and degree of protection not less than IP-55 and general construction confirming to IS -1347 epoxy powder coated and the control circuit shall be connected by multi stranded copper conductor flexible wire not less than 1.5 Sqmm in proper colour coding and drawn through in flexible conduit. All internal connection should be made by using copper strip/wire of suitable size and making incoming and outgoing connection using suitable size of gland, thimbling , grouting of the panel to PCC foundation PCC-M10 using 20 mm graded stone aggregate complete with following accessories all as specified and directed.(Panel No -02 – Offr Accn/Mess/Servant Qtr) Item Continued as 17.30

INCOMING (a) Incoming MCCB 4P having breaking capacity 36 KA of rating 200A adjustable type thermal magnetic release type with extended terminals - 01No. (b) Indication lamp LED type (Red, yellow, Blue) -01 set (c) Multifunction meter (KWH, V, A, PF, KVA, KVAR and Maximum Demand KW) – 01 No. Outgoing (a) Outgoing 4P MCCB, 25 KA, 160 Amps, 50 Hz,415V thermal magnetic adjustable setting type with extended terminals– 01 No (b) Outgoing 4P MCCB, 16 KA, 63 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 01 No (c) Outgoing 4P MCCB, 16 KA, 40 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 01 No (d) MCB 4 Pole 415 volts,5 to 32 amps – 01 No

Supply, Installation, testing and commissioning of LT feeder pillar board outdoor type cubicle panel board suitable for 3 phase , 4 wire 415 volt 50 hz factory fabricated CPRI type tested powder coated made out of 3.15 mm thick CRCA sheet and MS angle iron section 50x50x6mm frame with front and back open able double door system with locking arrangement louver and air vent gasket for natural air flow of air with canopy, inner compartment made out of 2 mm thick CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arrangements with aluminium bus bar of cap 160 amps three phase and neutral suitable capacity marked RED,YELLOW,BLUE and BLACK insulators, made of high strength insulated materials 1100 voltage, bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity, lifting lugs (02 Nos) ,arrangement to be connect earthing strip at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers. The panel should be chemically treated with 07 tank metal treatment process for anticorrosive treatment. The panel shall be completely dust and vermine proof and degree of protection not less than IP-55 and general construction confirming to IS -1347 epoxy powder coated and the control circuit shall be connected by multi stranded copper conductor flexible wire not less than 1.5 Sqmm in proper colour coding and drawn through in flexible conduit. All internal connection should be made by using copper strip/wire of suitable size and making incoming and outgoing connection using suitable size of gland, thimbling , grouting of the panel to PCC foundation PCC-M10 using 20 mm graded stone aggregate complete with following accessories all as specified and directed. (Panel No -03 – Adm Block, Quarter guard complex and Armouries) Item Continued as 17.30

INCOMING (a) Incoming MCCB 4P having breaking capacity 35 KA of rating 100A adjustable type thermal magnetic release type with extended terminals - 01No. (b) Indication lamp LED type (Red, yellow, Blue) -01 set (c) Multifunction meter (KWH, V, A, PF, KVA, KVAR and Maximum Demand KW) – 01 No. OUTGOING (d) Outgoing 4P MCCB, 16 KA, 63 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 01 No (e) Outgoing 4P MCCB, 16 KA, 40 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 02 Nos (f) MCB 4 Pole 415 volts,5 to 32 amps – 01 No

Supply, Installation, testing and commissioning of LT feeder pillar board outdoor type cubicle panel board suitable for 3 phase , 4 wire 415 volt 50 hz factory fabricated CPRI type tested powder coated made out of 3.15 mm thick CRCA sheet and MS angle iron section 50x50x6mm frame with front and back open able double door system with locking arrangement louver and air vent gasket for natural air flow of air with canopy, inner compartment made out of 2 mm thick CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arrangements with aluminium bus bar of cap 400 amps three phase and neutral suitable capacity marked RED,YELLOW,BLUE and BLACK insulators, made of high strength insulated materials 1100 voltage, bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity, lifting lugs (02 Nos) ,arrangement to be connect earthing strip at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers. The panel should be chemically treated with 07 tank metal treatment process for anticorrosive treatment. The panel shall be completely dust and vermine proof and degree of protection not less than IP-55 and general construction confirming to IS -1347 epoxy powder coated and the control circuit shall be connected by multi stranded copper conductor flexible wire not less than 1.5 Sqmm in proper colour coding and drawn through in flexible conduit. All internal connection should be made by using copper strip/wire of suitable size and making incoming and outgoing connection using suitable size of gland, thimbling , grouting of the panel to PCC foundation PCC-M10 using 20 mm graded stone aggregate complete with following accessories all as specified and directed.(Panel No -04 – Single Ors Accn/CHDH/Single JCOs Accn/ Sentry Posts/Tradesmen Shop & MI Room) Item Continued as 17.33

Incoming : (a) Incoming MCCB 4P having breaking capacity 36 KA of rating 250A adjustable type thermal magnetic release type with extended terminals - 01No. (b) Indication lamp LED type (Red, yellow, Blue) -01 set (c) Multifunction meter (KWH, V, A, PF, KVA, KVAR and Maximum Demand KW) – 01 No. Outgoing : (d) Outgoing 4P MCCB, 16 KA, 100 Amps, 50 Hz,415V thermal magnetic adjustable setting type with extended terminals– 02 Nos (e) Outgoing 4P MCCB, 16 KA, 63 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 02 Nos (f) Outgoing 4P MCCB, 16 KA, 40 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 02 Nos (g) MCB 4 Pole 415 volts,5 to 32 amps – 01 No

Supply, Installation, testing and commissioning of LT feeder pillar board outdoor type cubicle panel board suitable for 3 phase , 4 wire 415 volt 50 hz factory fabricated CPRI type tested powder coated made out of 3.15 mm thick CRCA sheet and MS angle iron section 50x50x6mm frame with front and back open able double door system with locking arrangement louver and air vent gasket for natural air flow of air with canopy, inner compartment made out of 2 mm thick CRCA sheet duly compartmentalized for each MCCB of incoming and outgoing with lockable arrangements with aluminium bus bar of cap 100 amps three phase and neutral suitable capacity marked RED,YELLOW,BLUE and BLACK insulators, made of high strength insulated materials 1100 voltage, bus bar chambers having front hinged covers with a set of electrolytic grade high conductivity, lifting lugs (02 Nos) ,arrangement to be connect earthing strip at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers. The panel should be chemically treated with 07 tank metal treatment process for anticorrosive treatment. The panel shall be completely dust and vermine proof and degree of protection not less than IP-55 and general construction confirming to IS -1347 epoxy powder coated and the control circuit shall be connected by multi stranded copper conductor flexible wire not less than 1.5 Sqmm in proper colour coding and drawn through in flexible conduit. All internal connection should be made by using copper strip/wire of suitable size and making incoming and outgoing connection using suitable size of gland, thimbling , grouting of the panel to PCC foundation PCC-M10 using 20 mm graded stone aggregate complete with following accessories all as specified and directed.(Panel No -05 – Small Arms/Coy Storage Accn / Storage Accn/ MT Store/Sentry Posts & Scales Accn) Item Continued as 17.36

INCOMING (a) Incoming MCCB 4P having breaking capacity 36 KA of rating 63Amps adjustable type thermal and fixed magnetic release type with extended terminals - 01No. (b) Indication lamp LED type (Red, yellow, Blue) -01 set (c) Multifunction meter (KWH,V,A,PF,KVA,KVAR,and Maximum Demand KW) – 01 No. OUTGOING (d) Outgoing 4P MCCB, 10 KA, 5 to 32 Amps, 50 Hz,415V fixed thermal and fixed magnetic setting type with extended terminals– 02 Nos (e) MCB 4 Pole 415 volts,10 KA 5 to 32 amps – 04 Nos

Supply and fixing Street light PVC Junction box with terminal plate of size 130 x 180 x 77 mm, impact and corrosion resistant including thermal management in multiple optics complete all as specified and directed.

Supply, installation, testing and commissioning of Solar LED luminaire 30 Watt mounting on GI pole of suitable size with Lithium Ferrus Phosphate rechargeable battery including all accessories complete all as specified and directed.

Supply and fix 3 core 1.5 sq mm PVC sheathed multistranded copper conductor cable 1.1 KV grade cable including necessary accessories complete all as specified and directed.

SEWAGE DISPOSAL RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls, Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 150 users complete all as specified and directed.

Soakage wells exc in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC completed filled with bricks bats of size 2.4m dia x 3.00m effective depth complete all as specified and directed.

RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls, Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users complete all as specified and directed.

Soakage wells exc in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC completed filled with bricks bats of size 1.8m dia x 3.00m effective depth complete all as specified and directed.

On site LLDPE septic tank conventional designed to carry sewage and sullage water, excavation in in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc, complete for 10 user complete all as specified and directed.

Soakage wells exc in anytype of soil, foundation in PCC 1:3:6 walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC completed filled with bricks bats of size 1.20m dia x1.50 m effective depth complete all as specified and directed.

SOLAR WATER HEATER S & F 16 amps rating industrial wall mounted plug and socket 2P+E with box suitable for IP 55 degree of protection with all fittings complete all as specified and directed.

INTERNAL WATER SUPPLY S & F Brass Chromium plated Urinal Spreader and fixed to urinal pot complete all as specified and directed.

INTERNAL ELECTRIFICATION M & L for point wiring for One light/fan point controlled by one switch with 2x1.5 sq mm (nominal area) 1100 Volts grade PVC insulated unsheathed multi stranded FRLSH multi stranded copper conductor cable, drawing through and including concealled non metallic PVC rigid conduit medium grade, concealed in wall/ceiling/fixed to roof for one light/ call bell / bracket / exhaust fan point controlled by one switch along with PVC insulated multi stranded copper conductor FRLSH cable 1x1.5 sqmm for earth continuity conductor and connected to earth dolly including fixing of GI flush mounting box of suitable module and suitable inner plate and modular plate of suitable size. The modular plate shall be flushed to wall, fixed with SS screw, complete all as specified and directed. NOTE : Chase cutting shall be measured & paid under appropriate items here-in-after.

All as per Srl Item No. 17.48 here-in-before but for One Call Bell/ Buzzer point controlled by one bell push switch.

All as per Srl Item No. 17.48 here-in-before but One switch socket out let point 6 Amps on independent board.

All as per Srl Item No. 17.48 here-in-before but One switch socket out let point 6 Amps on the same board with other switches.

M & L for point wiring with 2x 2.5 sq mm (nominal area) 1100 Volts grade PVC insulated unsheathed multi stranded FRLS multi stranded copper conductor cable, drawing through and including non metallic PVC rigid conduit medium grade, concealed in wall/ceiling/fixed to roof for 15 Amps switch socket outlet controlled by one switch along with PVC insulated multi stranded copper conductor cable 1x2.5 sqmm for earth continuity conductor and connected to earth dolly including fixing of GI flush mounting box of suitable module and suitable inner plate and with modular plate of suitable size. The modular plate shall be flushed to wall, fixed with SS/cadmium plated screw, complete all as specified and directed.

M & L for point wiring with 2x 4 sq mm (nominal area) 1100 Volts grade PVC insulated unsheathed multi stranded FRLS multi stranded copper conductor cable, drawing through and including non metallic PVC rigid conduit medium grade, concealed in wall/ceiling/fixed to roof for AC Starter Switch switch along with PVC insulated multi stranded copper conductor cable 1x4 sqmm for earth continuity conductor and connected to earth dolly including fixing of GI flush mounting box of suitable module and suitable inner plate and with modular plate of suitable size. The modular plate shall be flushed to wall, fixed with SS/cadmium plated screw, complete all as specified and directed.

S&F of Modular type TV Co-axial socket outlet-1 Module in the modular MS / GI sheet box and cover plate including connections etc complete all as specified and directed.

S&F of Modular type RJ-11 telephone socket outlet in the modular MS/GI sheet box and cover plate including connections etc Double RJ-11 in one Module complete all as specified and directed.

S&F Motor starter switch push button type 2 module 240 Volts 50 Hz (5HP) 25 Amps with all accessories complete all as specified and directed.

S&F LED light fitting 1x 20 W, 6500 K, 230 V, wall mounted Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate diffuser, environmental friendly,ennergy efficient LED batten with integrated electronic driver, fixed on and including 02 Nos of PVC round/square block, screws etc complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Model : E-Lite LED Pride Plus nxt Cat No. LHEXBLP7PN1W020 Make : Havells or equivalent approved make.

All as per Srl Item No. 17.57 here-in-before but LED light fitting 1x 18 W, 230 V. Cat No. LHEXBLP7PN1W018 Make : Havells or equivalent approved make.

All as per Srl Item No. 17.57 here-in-before but LED light fitting 1x 5 W, 230 V. Cat No.LHEXBLP7PN1W005 Make : Havells or equivalent approved make.

All as per Srl Item No. 17.57 here-in-before but flame proof light fitting 1x 18 W, 230 V. Make : Bajaj or equivalent approved make.

S&F 2' x 2' surface/recessed mounting LED light 36 Watts, 230 V, 50Hz, AC, with in built driver and occupancy sensor , complete with all accessories pre-wried and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Model : Venus Neo HE PIR , Cat Part No. VENUS -NEOHE2X2R36WLED857PIRSENSOR of Make Havells or equivalent make as approved by GE. NOTE : Necessary fixing arrangement i.e. clip on facilities in case of surface mounting deemed to be included in the item rate.

All as per item Srl Item No. 17.61 here-in-before but LED light 24 Watts, 230 V, 50Hz, AC. Model : Venus Neo HE PIR ,Cat Part No.VENUSNEOHE2X2R24 WLED857PIRSENSOR of Make Bajaj or equivalent make as approved by GE.

S & F Energy saving, environmental friendly, long life, decorative, corrosion resistant, surface-suspended luminaires round LED panel with premium diffuser 25 Watt 6500K complete all as specified and directed. Cat No. MONDO400RDP/S25WLED857SPSWH of Make Havells or equivalent make as approved by GE.

S & F Energy saving, environmental friendly, long life, Decorative wall light fixture made up of Polycarbonate, with and including 1x6 W LED lamp B22 base complete all as specified and directed. Model : Apple Cat No.LHFOFTE1TZ1W012 Make : Havells or equivalent make as approved by GE.

All as per item No. 17.64 here-in-before but with 1x9 W LED lamp B22 base. Make : Havells or equivalent make as approved by GE.

S & F Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution, energy efficient ,environmental friendly, round profile LED lighting fixture of 6 W 6500K complete all as specified and directed. Cat No. LHEAAHP7IL1W006 of Make Havells or equivalent approved as approved by GE.

All as per Srl Item No. 17.66 here-in-before but LED light fitting 1x12 W, 6500K Cat No. LHEAAHP7IL1W012 of Make Havells or equivalent as approved by GE.

All as per Srl Item No. 17.66 here-in-before but LED light fitting 1x24 W,6500K Cat No.LHEAAHP7IL1W024 of Make Havells or equivalent as approved by GE.

S & F LED Bulkhead 6.5 W 6000 K including LED Lamp 6.5W , non PIR with premium quality diffuser for glarefree light and easy to install snapfit installer completea all as specified and directed. Cat No. LHEXCGP7IN5W006 of Make Havells or equivalent as approved by GE.

All as per Srl item No. 17.69 here-in-before but LED light fitting 1x13.5 W, 230 V including LED Lamp 13.5W complete all as specified and directed. Make : Havells or equivalent as approved by GE.

S & F energy saving and environmental friendly long life LED Bldg security light 25 Watt made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment incl driver with IP66 protection and impact resistance of IK07 complete with GI light grade bracket 40 mm dia 1.2 mtr long bend to shape with fixing arrangement and connecting wire all as specified and directed. Cat No. ENDURAPEARLSL25WLED757SASYTOPCMP of Make Havells or equivalent as approved by GE.

All as per Srl item No. 17.71 here-in-before but LED light fitting 1x30 W, 230 V. Make : Havells or equivalent as approved by GE.

All as per Srl item No. 17.72 here-in-before but LED light fitting 1x35 W, 230 V. Make : Havells or equivalent as approved by GE.

S&F Wall Mounted Fan Polycarbonate Body with 400 mm sweep, High performance motor for better air delivery , Smooth oscillation & smooth running, Aerodynamically designed & balanced heavy duty PP blades, Superior low voltage performance , single phase 240 Volts, AC 50 Hz and connecting up complete including louvers and provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan all as specified and as directed including writing of MES No 2 cm height with synthetic enamel paint complete all as specified and directed.

S&F BLDC Exhaust Fan Sturdy ABS Body with louvers 150 mm sweep, 1900 RPM, single phase 240 Volts, AC 50 Hz , air delivery 240M³/Hr. , Power consumption 22 W and connecting up complete including provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan all as specified and as directed including writing of MES No 2 cm height with synthetic enamel paint complete all as specified and directed.

All as per Srl Item No. 17.75 here-in-before but 200mm sweep, air delivery 272M³ per minutes and rated power 40W(±10%) complete all as specified and directed.

All as per Srl Item No. 17.75 here-in-before but 250mm sweep, 1300 RPM, air delivery 720M³ per minutes and rated power 40W complete all as specified and directed.

Supply & Fixing Mushroom Prismatic decorative light fittings made of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base including one LED Lamp7W complete all as specified and directed.

S & F DB with sheet metal enclosure 240 volts, 6 way Single phase double door with copper bus bar neutral link, earth link, earthing studs, without MCBs complete all as specified and directed.

Sub total

SHRI BALAJEE PALACE PRIVATE LIMITED

Aalaya Engineering Project Private Limited

M/S SUNRISE ENTERPRISE

Agarwal Jagdish Construction Company Private Limited

PRABIR KANTI ROY

M.P. SITANI AND SONS

Phoenix Infra

M.P. Khaitan