(i) Repair and maintenance work of Short firing range (ii) Renovation work of long firing range at GC CRPF, Neemuch

Amount

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Old work (one or more coats)

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

Providing, fixing, commisioning and testing of a Automatic-operated target trolley. The frame is 9 feet high and 6 feet 6 inches wide, built from 45/3 (mild steel angle with dimensions of 45mm x 45mm x 3mm) iron angle. It features a galvanised wheel system with firing ball bearings to accommodate a target mounted on the frame with all required electrical, civil and machanical joint, connection and fabrication and complete all work. design and other changing scope of works on the any stage/time as per the Engineer-in-Charge.

Providing, fixing, commisioning and testing 0 to 50 yard PDM. It features a galvanised wheel system with firing ball bearings to accommodate a target mounted on the frame with all required electrical, civil and machanical joint, connection and fabrication and complete all work. design and other changing scope of works on the any stage/time as per the Engineer-in-Charge.

Providing, fixing, commisioning and testing of a Automatic Using a timer to turn the target. It features a galvanised wheel system with firing ball bearings to accommodate a target mounted on the frame with all required electrical, civil and machanical joint, connection and fabrication and complete all work. design and other changing scope of works on the any stage/time as per the Engineer-in-Charge.

Providing, fixing, commisioning and testing Panel for distributing power as required accessories according to the existing installed panels with all required electrical, civil and machanical joint, connection and fabrication and complete all work. design and other changing scope of works on the any stage/time as per the Engineer-in-Charge.

Providing, fixing, commisioning and testing A three phase junction box with with a 30 to 40 meter multicourse wire is located at the shooting hand with all required electrical, civil and machanical joint, connection and fabrication and complete all work. design and other changing scope of works on the any stage/time as per the Engineer-in-Charge.

Providing and fixing testing commisioning of Civic engagement in for firing range

Providing, fixing, commisioning and testing Electrical work involving Each set requires three auto-moving targets with a length of approximately 3.5 meters. with all required electrical, civil and machanical joint, connection and fabrication and complete all work. design and other changing scope of works on the any stage/time as per the Engineer-in-Charge.

Providing, fixing, commisioning and testing of a hand-operated target trolley. The frame is 9 feet high and 6 feet 6 inches wide, built from 45/3 (mild steel angle with dimensions of 45mm x 45mm x 3mm) iron angle. It features a galvanised wheel system with firing ball bearings to accommodate a target mounted on the frame with all required electrical, civil and machanical joint, connection and fabrication and complete all work. design and other changing scope of works on the any stage/time as per the Engineer-in-Charge.

Providing, fixing and all setting of Tyre (Truck Tyre which should be dia of Overall Length 7085 MM) for Inclined soil protection 5 Row(Total distance of 01 Row =60 Mtr) including nut bolt anchoring with all required electrical, civil and machanical joint, connection and fabrication. Required complete all work. A part from that the design and other changing scope of works on the any stage/time as per the Engineer-in-Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

ABHISHEK TIWARI (BID ID -3245956)

paras udyog (BID ID -3242680)

HONEST ENTERPRISES AND SUPPLIERS (BID ID -3243933)