Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-Finance | L1 | Accepted-Finance Found lowest rate | |
| 2 | L2₹5.0 L+₹37,084.01 (7.95%)Accepted-Finance | L2 | Accepted-Finance Quoted high rate | |
| 3 | L3₹5.2 L+₹51,552.11 (11.1%)Accepted-Finance | L3 | Accepted-Finance Quoted high rate | |
| 4 | L4₹5.2 L+₹55,359.50 (11.9%)Accepted-Finance | L4 | Accepted-Finance Quoted high rate | |
| 5 | L5₹5.2 L+₹56,654.02 (12.2%)Accepted-Finance S O LAWANG PHUNCHOK R O IGO | L5 | Accepted-Finance Quoted high rate |
Tender Value
₹7.6 L
EMD Value
₹15,200
Closing Date
19 Sept 2026, 2:00 pmClosed
Executive Engineer REW Leh
REW Leh
Major Repair at H/S Igoo
2026_RDD_19516_12
39-UTL REW Leh of 2026-27
Open Tender
Civil Works - Others
Percentage
30 days
Leh
Please refer Tender documents.
3 documents required · 3 mandatory
₹200
Payable To Executive engineer REW Leh
₹15,200
12 Oct 2026
9 Sept 2026
21 Sept 2026
9 Sept 2026
19 Sept 2026
9 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) | 189.29 | Kgs | 574.35 | ₹1,08,718.71 |
| - | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) | 12.5 | Kgs | 605.62 | ₹7,570.25 |
| 3 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 4.0 mm thickness (weight not less than 10 kg / sqm) | 4.46 | Sqm | 1,398.34 | ₹6,236.6 |
| 4 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.
Pre-laminated particle board with decorative lamination on both side | 20.9 | Sqm | 1,044.83 | ₹21,836.95 |
| - | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) | 53.95 | Sqm | 1,398.38 | ₹75,442.6 |
| 6 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm | 18 | Nos | 136.19 | ₹2,451.42 |
| 7 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 125mm | 18 | Nos | 56.22 | ₹1,011.96 |
| 8 | Structural steel work riveted, bolted or welded in builtup sections, trusses and
framed work, including | 1,000 | Kgs | 157.39 | ₹1,57,390 |
| - | Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint onoverlapping of sheets complete(upto any pitch in horizontal/ vertical or curvedsurfaces) ,excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
0.63 mm thick with zinc coating not less than 275 gm/ m3 | 92.9 | Sqm | 1,090.8 | ₹1,01,335.32 |
| 10 | Providing and fixing 12 mm thick pre laminated flooring of approved brand as
per direction of engineer incharge, complete job AC-4 including carriage. | 194.85 | Sqm | 1,434.33 | ₹2,79,484.94 |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.24 MB
BOQ_46216.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .