Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹30.0 L+₹9,230.70 (0.31%)Rejected-Finance ALPHA HOUSE PLOT NO 29 AGP P10 ASHWIN SECTOR NEW CIDCO NASIK 422 009 | NASHIK | MAHARASHTRA | 422009 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹32.2 L+₹2.3 L (7.80%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹32.1 L+₹2.2 L (7.31%)Rejected-Finance 10 SANJAY HSG SOCIETY RACCA COLONY SHARANPUR ROAD NASHIK 422 002 | NASHIK | MAHARASHTRA | 422002 | L4 | Rejected-Finance Not Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
1 Jan 2020, 6:00 pmClosed
Garrison Engineer Nasik Road
Garrison Engineer Nasik Road AOP Complex Near AOP Gate PO Gandhinagar Nasik 422006
As pe Tender Documents
2019_MES_304406_1
GE/NRC/8725/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Nasik Road
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Nasik Road
₹60,000
Yes
30 Jan 2020
6 Dec 2019
6 Jan 2020
6 Dec 2019
1 Jan 2020
20 Dec 2019
Amount
Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground
Dismantling fencing wire mesh, any type complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface
Excavating in trenches,n exc 1.5 m wide and n exc 1.5m in depth for foundation etc in any type of soils
Returning filling in, including spreading, leveling , watering & well ramming in layer n exc 25 cm as in soft/loose soils
Removing excavated material n exc 50m & depositing where directed at a level n exc 1.5m above the staring point as in soils
M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete
M&L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) in Cement concrete in foundations, filling and mass concrete compete all as specified by EIC.
S&F Mild steel works in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 all as directed by EIC
S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.
S&F 5 to 10 mm neck diameter Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete alll as specified and directed.
M&L for two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of surfaces.
Demolition of Brickwork or stone/boulder masonry, built in built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete article complete all as specified and directed.
Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete.
M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.
-ditto all as iteme No 17 above but except bricks.
M&L for providing PCC 1:3:6 type C1(using 20mm graded stone agg) as in coping, plinth course, steps and risers, parapets, and railing upto 60cm in height etc complete including necessary from workin required complete all as specified and directed.
S&F Providing precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, Kerb stones etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match with CM 1:6 complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc. including racking out jionts, hacking for key, scrubbing down with water, etc.
M&L for rendering 15mm thick on fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete.
M&L for rendering 15mm thick on other than fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete.
M&L for 20mm th Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchv ith shade of granite complete all as specified and directed by Engr in Charge.
M&L for reinforced cement concrete (nominal mix) type B1, 1:2:4 (20 mm gradaed aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed by EIC.
- ditto all as per item No 25 above but in beams, cantilevers, lintels over 1.5 m span
- ditto all as per item No 25 above but in foundations, footings, plinth beams, bases for column etc.
- ditto all as per item No 25 above but in walls, retaining walls, ballast walls and the like.
S&F mild steel 10m dia and over cut to length, bent to shape requred, including cranking, bending, spirally for hooping for coumns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to TMT bars.
-ditto all as per item No 29 above but 6mm to8 mm dia
ditto all as per item No 29 above but 5mm dia and over and incl 10 mm dia stirrups, spacers and binders.
Formwork to flat rough finished surfaces sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
-ditto all as per item No 32 above but in pillars, post, struts, piers, columns and stanchions
-ditto all as per item No 32 above but in side and soffits of floor or rough beams beam hauncings girders etc.
-ditto all as per item No 32 above but in faces of walls, retaining walls, abutment, parapet and staircaserailings etc.
-ditto all as per item No 32 above but in soffits of suspended slab such as roof slab, floor slab, landings and similar work not exc 200mm th.
S&F Providing precast cement concrete louvres and jallies (As per existing size and design), type B0 1:2:4 (12.5mm graded stone aggregates) 35mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid) set in CM 1:6 complete all as specified and directed by EIC.
M&L for three coat of white wash on newly prepared surfaces including preperation on wall surfaces etc complete.
M&L for preparing newly plastered surfaces of any descripion and applying 2 coats of cement base paint over a coat of primer complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc.
S&F Mild steel in Framed work such as side hung/sliding as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work con- forming to Fe.290.Gde-E-165
S&F Mild steel works in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for
Separating, scraping and cleaning of reinforcement (Demolition measured separately)
Demolition of Concrete work of any description and in any position not otherwise specifically provided for
Dismantaling of stone slabs of any descripation or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed
Scarifying or picking gravelled, surfaces of any description in area n. exc 400 sqm and exc 50mm but n. exc 100mm deep including removed material stalking at a distance n. exc 50mtr complete all as specified and directed.
M&L for hard core of broken stone or boulders of gauge not exc 63 mm deposited spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate), 100mm thick
M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in CM 1:4 all as specified and directed.
M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on including 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and directd
M&L for cement concrete 1:3:6 Type - C2 ( using 40mm graded stone aggragate) as in surface channel & drain all as specified and directed
M&L for extra for forming fair finished drains or channels exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for reinforced cement concrete type B1, 1:2:4 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves complete all as specified.
M&L for provding pre cast cement concrete type B1 1:2:4 (20 mm graded aggregate) in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similr articles with plain faces and set in CM 1:6 complete all as specified.
M&L for providing precast cement concrete type C1, (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and directed.
M&L for providing precast cement concrete type C1, (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and directed.
S&F Reinforced concrete pipes, class NP3, 300mm bore dia laid and jointed complete with collars complete all as specified and directed by EIC.
M&L for preparation of new surfaces of Brick, stone, concrete, asbestos cement or platser surfaces of any description over 10 cmm girth or width, not otherwise described and applying two coat of synthetic enamel over a coat of primer complete all as specified and directed.
NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 77,700.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.
Alpha Construction
M/S SAMEER SUBHASH PATANI
Vishal Constructions
Bidder Name
Vishal Constructions
M/S SAMEER SUBHASH PATANI
Alpha Construction
M/s. SHRI SAINATH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .