SPL REP TO BLDG NO EST-152 AT PATHAHIRI, BLDG NO P-21 AND P-23 AT PANZGAM AND PROVN OF GEN SET AT TREHGAM UNDER THE AOR OF GE 874 EWS.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based steel sheet 0.50mm thick, of any colour having tensile strength of 550 Mpa, profiled for ridge as in roof covering, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. with Fe 410 W (Gde E-250) quality 'A' complete all as specified and directed.

All as per item No 5 above but erecting & fixing only complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12mm thick, 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling/false ceiling, including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed.

S&F clean swan batten at 30 cm centre exc 5 and not exc 15 cm of 2nd class soft wood complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed.

M&L for plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm and not exc 6 Sqcm secured with nails complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for 25mm thick PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor finished even and rough to receive the topping layer complete all as specified and directed.

S&F for glazed ceramic tiles coloured of size 350x250x7mm /450x350x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/ rectangular) area of each tile exc 0.06 sqm but n. exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (using 20mm stone aggregate as in plinth protection), 75mm thick complete all as specified and directed.

Demolition of brick/stone wrk built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed.

M&L brick work with old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M& L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick / concrete/stone, surfaces and finished even and smooth without using extra cement mixed with WPC @ 3% by Wt. of cement (External surfaces) complete all as specified and directed. WPC shall be measured and paid separately complete all as specified and directed.

Supply only approved integral water proofing compound complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement (Internal surfaces) complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed.

M&L for preparation of old steel/galvanised surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer on newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed.

Taking down chowkhats or frame exe. 1.5 sqm and n.exc. 4 sqm each with shutter (w/o taking out shutter) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed..

Refixing shutters in same opening exc 1 Sqm and n. exc 2 Sqm each complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

S&F mild steel work with angle or any other section as in door frame, window guard bars, grill and other similar work complete all as specified and directed.

S & F 300 mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy complete all as specified and directed.

M&L for precoated sheet type door spring, heavy type, 200 mm long including roller and roller plate complete all as specified and directed.

S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed.

S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section complete all as specified and directed.

S & F aluminum handles, cast type, anodized 150mm long complete all as specified and directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Harrison rails, stainless steel, with fixing brackets, stops, rollers etc., complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads complete all as specified and directed.

M & L sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed.

S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed fixed to wall or laid in trench complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed.

M&L for PCC (1:4:8), Nominal mix, type C-1 using 20mm graded aggregate as in surface channel and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for providing, cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L material and labour for preparing the new plastered surfaces of walls up to any height and applying two coats of white wash complete all as specified

M&L for Machine cut Kota stone slab flooring 18-20mm thick over screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. sand complete all as specified and directed.

S&F in repair 1.25mm thick Steel rolling shutters, without ball bearing, as specified including top cover, an[1]choring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed complete all as specified and directed.

S&F for 2nd class soft wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed.

S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.

S&F 30mm thick, 2nd class soft wood, Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, shutter for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b) complete all as specified and directed.

S&F for 75mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed.

S&F for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Aluminium handle, cast type, anodised 100 mm long complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.

M&L 20 mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails as in wall, facia, eaves boarding complete all as specified and directed

All as per item No 64 above but fixing only.

M & L for walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m redius, in cement mortar 1:6 complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

M & L for point wiring One light /one fan/one bell point controlled by one switch, with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular Teressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed.

All as per Item No 70 above but point wiring for One socket outlet 5 pins 5 amps controlled by one switch on same board .

All as per Item No 70 above but point wiring One socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per Item No 70 above herein before but wiring with 2.5 sqmm copper wire ( FRLS) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F socket outlet multi 5 pins 6 amp, complete all as specified and directed.

S & F switch socket combination 3 pin 16A, flush type complete all as specified and directed.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed.

Supply and fixing in replacement LED warm lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type/surface type as require with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling/false ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V, fixed sunk/flush to the wall complete all as specified and directed.

S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, including service bracket for incoming through one twin core cable of size 16 Sqmm complete all as specified and directed

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp, bracket GI with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers, shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm sweep complete with fixing arrangement and connection including cutting chasing hole in the wall for exhaust fan etc complete all as specified and directed .

Supply and fixing earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm galvanised iron strip complete all as specified and directed.

Supply and fixing Air termination, single pointed aluminium rod 12mm dia and 300 mm long complete all as specified and directed.

As per srl item No 86 above but using galvanised iron strip 25×4 mm as earthing lead up to 7 mtr.

Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc. of capacity 58.5 KVA complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode using plate 60×60cm ×6 mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected using galvanised GI strip 32×6 mm as earthing lead ,bolts, nuts, check nuts and washers of GI including protection GI pipe med grade 40 mm for earthing lead and GI pipe med grade 20 mm for watering all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated and armoured, heavy duty, electric power cable, cross sectional area 70 Sqmm 3.5 core aluminum conductor 1100 volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed.

Supply, installing, testing and commissioning, factory made & tested including CPRI approved, LT Feeder pillar box indoor type, suitable for 415Volts 3phase 4wire 50Hz AC supply having bus bar chamber with insulated copper bus bar 200amp rating installed on porcelain insulators, The panel shall be dust and vermin proof, IP65/66 protection & made out of MS CRCA quality sheet 2.0mm thick, and 50mm x 50mm x 6mm angle iron base frame with 04 Nos legs 75cm long made out of MS angle iron of size 50mm x 50mm x 6mm, legs embedded in PCC (1:2:4) having bottom of the panel at height of 45cm above ground level, duly powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer inside front opening type with aprons for cable entry with single door shutter and locking arrangements, internal wiring with PVC insulated solid copper conductor FRLS cable, IS-694 marked of adequate size, the scope of work comprising the following:-

Supply and fix Rubber mat of 1 meter x 2 meter x 10 mm complete all as specified and as directed.

Please Enable Macros to View BoQ information