CONSTRUCTION OF TUBE WELL, PIPE LINE, DRIP SYSTEM AND SOLAR PUMP SET AT VILLAGE DURGAWATO KA NOHRA GP GHASA AND VILLAGE BAPER GP GHASA BLOKC MAVLI MJSA 2.0 ( PHASE-2 STATE FUND

Tube well

Constructionof tubewell after completionof drillingby rotary/percussion method&upto100mtr.depth inall typeof rocks by DTH system as per IS:2800Part1:1991and IS:2800PartII:1979(bothamendeduptodate)and technical specifications. Thework shall be deemed completed only after obtainingsandfreewater. Theborewell shouldhaveathroughoutnominal size bore beyond casing pipe. ( item no. 2.3.2 from PHED BSR 2023) Nominal bore 200 mm dia.

Supply of ERW MS black casing pipe ISI marked(IS: 4270/2001) or amended upto date of following sizes. ( item no. 2.11.3 from PHED BSR 2023) 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m)

S & F tube well cover of MS sheet ( 6mm thick) with nuts and bolts complete for casing size 200 mm dia PWD BSR 2019 4.8.4

Providing and Fixing of ISI marked PVC storage tank of following capacity as per IS: 12701-1989 (of approved make) with cover, 25 mm dia. 1 mtr long GI overflow pipe, 25 cm long 25 mm dia washout GI pipe with plug & socket, including P&F 32 mm dia Ball Cock (Float valve) IS 1703 marked with rod and PVC ball complete with brass weight 1000 gm, including P&F 15mm dia CI quarter turn heavy duty Bib Cocks four no's of superior quality and approved make, including interconnections complete job. : ( item no. 2.28.1 from PHED BSR 2021-22 )1000 liter

SOLAR PUMP SET 5 HP AC INSTALLATION AND COMMISSIONING

Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably design to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document. 10.0 HP (PHED Udaipur BSR 2023 Item No. 10.2)

Providing, installation, testing and commissioning of AC submersible pump sets with inbuilt or individual solar pump controller with Maximum power point tracking (MPPT) for optimally use the solar panel and maximize water discharge to deliver maximum water during the day including PVC flat submersible cable from controller to motor pumps.. Solar pump shall be of Stainless steel construction and performance shall be as per scope of work and minimum lift of water shall be as per defined in scope . Pump controller shall have Adequate protection against dry operation of motor pump set, and against hails and storms. Full protection against open circuit, accidental short circuit and reverse polarity should be provided. A good reliable on/off switch be provided. The cable shall be ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date ( standard insulation) and conductor as per class 5 of IS 8130:1980 or amended up to date. The duty condition of pump set shall be as per scope of work and entire work shall be executed as per technical specification and direction of Engineer in charge (PHED Udaipur BSR 2024 Item No. 10.5.4)

Drip Irrigation System

Supply, Installation, Testing and Commission of Drip Irrigation System for various Spacing Drip & various spacing of dripers/emitters including mains PVC/HDPE pipelines, class II : 4 to 6 kg/sqm pressure, size 50-90mm diameter, laterals 12mm to 16mm diameter, class II 2.5 kg/sqm pressure and emitters for 4/8 LPH discharge with complete assembly including various valves, Screen filter 20-25 Cum/hr/Disc Filter and ventury and manifold, Air release valve 1", NRV 1.5"/2", Bypass Assembly 1.5"x1.5", Control valve 75/63/50mm, Flush valve 63/50mm, Throttle valve 2", fitttings & accessaries, Specifications as per Annexure IVa to IVg of GOI Operational Guidelines 2021 for PDMC Componenmt of PMKSY. For 5 ha

Providing and Fixing of Hydrocyclone filter of various capacity conforming to IS; 14743, as per PMKSY - MI Operational Guidelines.For capacity 25 cum/Hr.x2"

Providing and Fixing of fertilizer tank with complete assembly of various capacity of any approved make, as per PMKSY - MI Operational Guidelines. For capacity 30 litrs

Providing and Fixing of Backwash Assembly Sand filter of various capacity conforming to IS; 14606, as per PMKSY - MI Operational Guidelines. For capacity 25 cum/Hr.x2"

Pipe Line

Excavation of trench for pipe line work Including refilling of earth GKN BSR 2025 2 B

Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . 75 mm dia PHED BSR 2022-23 Item no 1.4.1.2 Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.

1 inch Garden plastic pipe

Please Enable Macros to View BoQ information