Providing and Fixing Open Gym and Equipment of at Different Location in R. K. Puram Assembly Constituency (AC-44)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 15m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand).

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size).

Supply & fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness or equivalent Make ABS BOARD/ SIT UP BOARD (Double) of size 1400x1366x650mm fabricated with main post of 114mm and “C” Class G.I. pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 60-80 micron thick. All joints of pipe are4 robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint are applied at all welding points prior to finishing. Sit up boards and Base plate cover to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and UV resistant and environmental friendly. All complete as per direction and approval of engineerin- charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipment etc including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply & fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness or equivalent Make SHOULDER TWIRL DOUBLE / ARM WHEEL make of size 857x850x1815mm fabricated with main post of 114mm and “C” Class G.I. pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 60-80mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paints are applied at all welding points prior to finishing. Packaging: Safety 3-layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipment etc including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply & fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness or equivalent Make Aerial Stroller • Product Area : 1m x 0.5m (5ft x 2.6ft) • Safe Play Area : 2m x 1.5m (6.6ft x 5ft). Ideal For 13 Years & above. • Strengthens Leg Muscles. Lower body workout Technical Specification: The Aerial Stroller having Ergonomic design with 80NB GI main vertical support pipes of Aerial Stroller are fixed over 10mm thick base plate. Clamping plates are attached to main frame to hold the rest of assemblies. Bottom horizontal pipe is of 50NB GI pipe. An ergonomically designed Handle frame is connected to main frame. Footrest bend and Handle having 40NB and 25NB Dia galvanized pipe respectively. The materials used for foorest is aluminum/LLDPE/HDPE/Nylon. Specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. Pipe Materials & Class: Heavy Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used. Powder coating shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. Bearing Housing shall be made from MS material. Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI / FAG / NRB make shall be provided for smooth & trouble-free movement. Pins shall be made from EN8/ MS material & Circlips made from standard material. Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015. Color shall be Multicolor for optional or customized and as per RAL Shade. Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply & fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness or equivalent MakeChest & Shoulder Exercise Combo: Item Descriptions • Product Area : 2020mm x 1050mm • Safe Play Area : 4020mm x 3050mm• Ideal For : 13 Years & above Function • Strengthens Back Muscles.• trengthens Chest Muscles.• Upper body workout Technical Specification:•Post Dia: The "Chest & Combo " having Ergonomic design with 100NB GI main vertical support pipe isfixed over 10mm thick base plate. clamping plates are attached to main frame to hold the rest of assemblies.•Footrest and Handles: Footrest frame and Handle having 32NB and 25NB Dia galvanized pipe with Rubber grips respectively. •Seat: Ergonomically Designed, Complete Rotational Molded single piece part, Material :- LLDPE/HDPE/Nylon. •Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. •Pipe Materials or Class: Medium Duty ('B' Class) and Heavy Duty ('C' Class) Series of pipes only.Wall thickness of pipe varies according to class/series of pipe used.•Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.•Bearing Housing is made from MS material. •Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make, to provid smooth & trouble-free movement. •Pins and Circlips: 25mm and 47mm diameter pins are made from EN9 material & Circlips made from standard material. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015 Color: Multicolor for optional or customized and as per RAL Shade. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply & fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness or equivalent LEG EXTENTION : Product Area: 0.73m x 0.75m (2.4ft x 2.5ft).Safe Play Area: 2.73m x 2.75m (8.9ft x 9ft). Ideal For: 13 Years & above. Function:For lower body workout. Technical Specification:Main Frame of Leg extension is 100NB G.I Pipe.The paired 25NB pipe handle with PVC/ rubber handgrips at the end is fixed over 40NB pipe frame.Two rolling frames are made by 40 NB & 20 NB G.I. pipes. Rolling frames are hinged at the one end of 40 NB bend pipe frame with specially designed bearing housing. The materials used for forest are aluminium/LLDPE/HDPE/Nylon. A suitable Nylon roller is provided for foot rest on rolling frame for cushioning purpose. Two PU rubber bushes are attached to main support pipe to avoid jerk due to impact of rolling frames.Bearing Housing shall be made from MS material. Bearings are oil sealed, selflubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement. All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron. Medium Duty ('B' Class) and Heavy Duty ('C' Class) Series of pipes only. Wall thickness of pipe varies according to class/series of pipe used. Powder coating shall be done with pure polyester raw material. Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. Certificate: ISO9001:2015. Color shall be Multicolor for optional or customized and as per RAL shade. Safety 3-layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Supply & fixing of Arihant /Kompon /Landscape /Koochie / Hugo / Grandslam Fitness or equivalent Make HIP TWISTER TRIPLE/ WAIST TWISTER size1840x1840x2000mm fabricated with main post of 114mm “C” Class G. I. Pipe made of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel of 60-80mm micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paints are applied at all welding points prior to finishing. Rotating and base plate cover to be made from virgin LLPDE manufactured by rotational moulding with minimum thickness of plastic of 8mm colourful and UV resistant and nvironmental friendly. Bearing used shall be made maintenance free, duly oil sealed and self-lubricated made by reputed company to be approved by Engineer-incharge. Equipment to be fitted with inbuilt limiter to prevent unwanted movement. Safety 3-layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipment etc including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines. Including anchor fasteners on a concrete foundation and J shaped welded bolt and once the concrete is set, fix the equipment on to it and cover nuts and bolts with technical specifications.

Providing and Laying 20 mm thick EPDM rubber flooring.

Please Enable Macros to View BoQ information