Rejuvenation of Campal area of Panaji City as a green space with recreation centre and facility for smart parking

Amount

Excavation of old solid waste dump /earth by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30cm in depth ,1.5m in width as well as 10 sqm on plan) including carriage of excavated old solid waste dump/earth lead upto 50m and all lift, screening ,manually picking & segregating different waste materials, spreading /window and screening in h rotary trommel (trommel of required capacity to be brought at site by the contractor at their own cost) including cost of transport from windrow area to rotary trowmel and bailing of plastics and storage of other non biodegradable material including spraying innoculums and biosanitisers (1 Litre per cum of old garbage), providing barricading , dangerlihting guarding and all safety measures to prevent air pollution /water pollution including working in foul conditions as directed all complete.Upto 1.50m depth

Excavation of old solid waste dump /earth by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30cm in depth ,1.5m in width as well as 10 sqm on plan) including carriage of excavated old solid waste dump/earth lead upto 50m and all lift, screening ,manually picking & segregating different waste materials, spreading /window and screening in h rotary trommel (trommel of required capacity to be brought at site by the contractor at their own cost) including cost of transport from windrow area to rotary trowmel and bailing of plastics and storage of other non biodegradable material including spraying innoculums and biosanitisers (1 Litre per cum of old garbage), providing barricading , dangerlihting guarding and all safety measures to prevent air pollution /water pollution including working in foul conditions as directed in : Below 1.50mt upto 3.00 mt depth

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :Upto 1.50m depth

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in Below 1.50mt upto 3.00 mt depth

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed inBelow 3.0 mt upto 4.5 mt depth

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed inBelow 4.5mt upto 6.0 mt depth

Filling n plinth and floors with contractors material /brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers (excluding rock) not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer.

Loading and unloading of excavated earth.By mechanical transport including loading , unloading and stacking upto a lead upto 10 kms

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. (a) Pre-Construction

Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. (b) Post Construction

Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.

Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin- charge. All works upto floor V level: M-30 grade of concrete

Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin- charge. All works upto floor V level: M-25 grade of concrete

Centering & shuttering including Strutting, Propping & removal of forms for: a)Foundations, Footings, Bases for columns

Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)

Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

Staircases (except spiral staircases) excluding landing

Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Suspended floors, roofs landings, shelves & their supports

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m,for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs landings,beams & balconies.(From 3.50m upto 4.50m)

Providing TMT steel reinforcement (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Brick work using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with bricks of class designation 40 kgs / cm2. in foundation and plinth.

Brick work using fly ash bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) with bricks of class designation 40 Kg / sq. cm, in superstructure upto floor V level. Brick size 230mm X 110mm X 80 mm

Providing and laying half brick masonry using fly ash bricks in cement mortar 1:3 (1 cement : 3 coarse sand) with 2 nos of 6mm dia M.S bars at every third course embedded in cement mortar above plinth upto floor V level.(With bricks of class designation 40 kg/sq.cm.)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces,in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 6mm thick in a single coat in cement mortar1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar1:4 using waterproofing compound at 1kg per cement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand faced treatment 6to8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying 2 coats of white cement based wall care putty of approved make over plastered / RCC surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and conveyance of all materials, labour charges, scaffolding, sundries etc. complete.

Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Painting three or more coats with acrylic exterior paint of approved brand and manufacture (such as weather shield, APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Finishing wall with waterproofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to give an even shade.

Applying priming coat with ready mixed red lead paint of approved brand and manufacture on steel work.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Painting (one or more coats) with black japan paint of approved brand and manufacture to give an even shade.

Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and applying Melamine polishing on wood work (one or more coat) Glossy

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete.-on Concrete Flooring

Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete. 600x 600 mm Dark Shades

Providing and laying vitrified Antiskid floor tiles in different sizes of Johnson, Somany,Kajaria (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete. 300 x 300 mm dark Shades - 10mm thick

Supply and installtion spike resistance rubber flooring for Locker room it consist of colour rubber granules and 30% synthetic EPDM granules floor should be Environmental friendly, non-toxic, Recycled , non-polluted, anti-slip and anti-fatigue Laid with adhesive as per manufacturer’s instruction over existing leveled surface with following Technical specification. Density (kg/m):1250/1400,Hardness (Shore a):65, Length (m):not less than 10 mtr Width (m):not less than 1 mtr ,Thickness (mm): 10mm (tolarance in thickness not less than ±0.3mm), Tensile Strength ASTM D41206A(2013) :- not less than 2MPa , Tear strength ASTM D62400 (2012) :- not less than 10 kn/m, Compression set ASTM D395-03(2008) Method B:-not less than 12%

Kotah stone slab flooring over 30 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing etc. complete. 20mm thick

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab.-Elite Brown

Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.:600 x 600 mm - Dark Shades

Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.600 x 600 mm - light Shades

Precast plain Cement Tacktiles 32mm thk of required shade in floors, treads of steps and landing laid on 25mm bed of cement mortar 1:4(1cement:4coarse sand) jointed with neat cement slurry with pigment to match the shade of tiles including rubbing and polishing complete.

Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Providing and fixing Granite stone slabs (flamed finish) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs,including rubbing and polishing complete-Elite Brown

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm-Jet Black

52mm thick cement concrete flooring/ IPS Flooring with metallic concrete hardener topping, under layer of 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layers 12 mm thick metallic cement hardener constituting of mix 1:2 (1 cement: 2 graded stone aggregate 6 mm nominal size by volume with which metallic quality is mixed in ratio 4:1 (4 parts of cement: 1 part of metallic) hardening compound of approved floor hardening compound of approved quality) by weight, including finishing complete.

Providing and laying 20mm thick cuddapah in shelves over 20 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) etc.complete

Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the Engineer

Full/half rounding and polishing of edges of granite slab as per the requirement.

Surface Preparation Prepare the concrete surface using Grinding/ Scarifying to remove any loose material, Contaminations and laitance to provide a sound, fine gripping surface. Clean the entire floor area using a powerful industrial vacuum cleaner. FLOORING OF 3mm THICK:Providing Moisture barrier of 2mm thick Providing and applying 2 part water dispersed epoxy resin primer Sikafloor ®-80 primer or equivalent Providing and applying three part, self smoothing underlay screed Sikafloor 81 Epocem or equivalent to a thickness of 2mm @ approx. 4.5 kg/m2 having carbon dioxide diffusion coefficient 4168 as per Klopfer Engel fried method Water vapour diffusion co-efficient µH2O = 252 as per DIN 52615, Water absorption co-efficient W = 0.02 kg/m2as per DIN 52617.. When applied at minimum 2 mm thickness it can be laid over high moisture content substrate and must be used when substrate moisture is more than 4%. Installation of Self leveling epoxy – 1mm Providing and applying four part, self smoothing, solvent free, coloured, smooth glossy, epoxy resin screed Sikafloor®-261hs 1 mm having compressive strength of 65 N/mm2 ASTM C 579, Flexural strength of 45N/mm2 as per DIN EN 196, tensile strength of 16N/mm2 as per ISO 527, Shore D Hardness 75 As per DIN 53 505, abrasion resistance 0.35mm as per IS 1237&IS9162-79. All in complete as per the manufacturers specifications and directions of the engineer in charge.

Providing and fixing Toilet cubicals as under with door, pilaster and divider of 18mm thick board both side decorative compact laminate of required colour ,shade and sizes as manufactured by Besco by Merino or Greenlam Sturdo or T Line or equivalent as approved, including stainless steel accessories ( SS-304 grade) like square top rail. Front panel and divder wall with stripe shoe touching floor ( No gap shall be at bottom of divder/front panel except door) , knob, thumb turn and indicator, twin coat hook, door stopper, adjustable shoe, gravity hinges, and locking arrangement, SS channel etc as desired. all complete as per drawings . The cubical unit shall be installed in approved finish, shades and colours as per specifications and direction of Engineer in charge. The cubical unit shall be minimum 10 years guarantee for the board against any moisture and 5 years guarantee for the hardwares. (Cubical size =(900mm width x1500mm depth), Cubical Height =2100mm, External Laminate finish = Metallic).

Providing 20mm thick marble slab to urinal partitions with cement complete

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing M.S. fan clamp type 1or II of 16 mm dia M.S. bar bent to shape with hooke ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete.

Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(As Directed by Engineer in Charge) Note: Only Calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having are less than 0.30 sqm. The Calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection>85% noncombustible as per B.S.476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC.

Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring 'T' with :b) GI Metal Ceiling Clip in plain Beveled edge global white colour tiles of size 600x600 and 0.4- 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

Providing water proofing treatment over the new R.C.C. roofs, terrace, toilet by spreading cement slurry over the R.C.C. slab and laying of10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. inthe R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.(Terrace, Sunken Portion of WC's, Toilet, Kitchen etc)

Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck, using integral crystalline admixture @ 0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R- 2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (To be used in Concrete of Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS)

Providing and applying indepth crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS) a)For vertical surface of Underground Tank@ 0.70 kg per sqm

Providing and applying indepth crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (Retaining Wall) ( AS PER MANUFACTURES SPECIFICATIONS) a)For horizontal surface of Underground Tank@ 1.10 kg per sqm

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in position.Second class Indian teak wood

Providing and fixing of approved colour/shade and texture 30 mm thick single piece granite stone door frame in approved width having suitable width rebate min 12 mm deep matching with the shutter thickness at all levels using 6 mm (min) thick base of tile /stone adhesive Bal gold star grey + Bal Admix Ad-1 of Ardex Endura or Laticrete – 254 Platinum-(Grey & White) of MYK Laticrete or Araldite with marble chips including filling joints with white cement mixed with matching colored pigment to match shade of the slab including rubbing and mirror polishing of exposed edges , curing etc. complete.

FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. Specified Cross Section d) 5” x 2 ½ “

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos shutter thickness :: b) 35mm

Providing and fixing hydraulic floor spring of reputed make Everrite, prabhat or equivalent as per the manufacturer's as specification having double action spring as approved by the Engineer-in-charge.

Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete.

Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete: 125 x 70 x 4.0mm (ordinary type)

Providing and fixing chromium plated brass butt hinges with necessary screws etc. complete: 75 x 40 x 2.5 mm (ordinary type)

Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete.250 x 10 mm

Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete.

Providing and fixing chromium plated brass handle with necessary screws etc. complete.-125mm

Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size.

Provided and fixing chromium plated brass 100 mm. mortice latch and a pair of levers and handles with necessary screws etc. complete (Indian make of approved quality).

Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.

Extra for providing mechanical device, chain and crank operation for operating rolling shutters.Exceeding 10.00 sq.m. and upto 16.80 sq.m. in area

Providing and fixing Ball bearings for rolling shutters

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Design, supply & installation of suspended Spider Glazing system (Frameless glass structural glazing) designed to withstand the wind pressure as pr IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21mm thick. The Glass fins and glass panel assembly shall be connected to Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding , other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.

Extra over design, supply and installation of Spider glazing system, for provision of 12mm thk clear toughened glass door shutter fittings including the cost of top & bottom patch fitting, over panel patch, panel connector pivot, over panel/sidepanel connector with pivot, bottom lock, stainless steel hardware fittings of 316 grade for operating door i.e. door handle 450mm Lg, floor spring of approved make and locking arrangement etc. complete including the cost of cutting the floor and making good the same, as per design and drawing all complete as required.

Providing and fixing 18 mm thick approved colour/shade and texture pre- mirror polished granite stone slab in jambs and lintel internally (using single length upto 2.0 mt.) at all levels using 6 mm (min) thick base of tile /stone adhesive Bal gold star grey + Bal Admix Ad-1 of Ardex Endura or Laticrete – 254 Platinum-(Grey & White) of MYK Laticrete , filling joints with white cement mixed with matching colored pigment to match shade of the slab including rubbing and polishing, curing etc. complete. (Quality of granite stone slab shall be of price range of Rs 1665.00 to Rs 1885.00 per sq.mt).

Providing and Fixing matt finish stainless steel (of 302grade) railing with top pipe of 50mm dia. and vertical pipe of 38mm dia at 0.60m c/c or as required and horizontal pipes of 25mm dia in three rows, all pipes of 2mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75mm dia above newel post of 75mm diameter etc.complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

Providing and laying of aluminium fixed with 65mm x 38mm tubular frame with 6mm thick glass sections are powder coated with pure ployster powder of thickness 75-80 microns with approved standard accessories. The glass would be fixed with taper clips with EPDM beading and including filling gaps with silicone sealant of approved make etc complete. (Shop drawing to be submitted by contractor for approval.)

Supply and installation of Aluminium Louvers. The frame should be made of Aluminium tubes of size 100x50X1.50 mm thk and 50X25x1.50 mm thk C channels. Aluminium Z shaped louvers of 100mm should be fixed to the supporting frame with aluminium cleats, GI screws, etc complete. The whole assembly is powder coated with pure polyester paint. (MS framing to be paid separately)

Steel work(SAIL, TATA. VIZAG only) riveted or bolted in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.In tees, angles, flats and channels

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately).

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

G.I Barbed wire Fencing with MS angles placed at intervals of 1.80m spacing duly embedded in C C bed in masonry wall, provided with horizontal lines of barbed wire weighing 9.38kg/100m (minimum) etc complete.(cost of angle etc., will be paid separately)-Payment to be made per meter cost of total length of barbed wire used. With G I barbed wire

Providing and fixing double-wall hollow blow mold bucket type seat having minimum dimensions as 465 mm side length x 420 mm front width x 400 mm rear height in one piece of HDPE having minimum shell thickness of 3 mm on each wall and minimum density of 0.95 gram/cm3, weight of plastic chair should not be less than 2.2 kg, chair should withstand in high temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, with two digit aluminum number plate for seat to be fixed on aluminum floor mount frame by the process of grouting with bolt. The chair should be fixed with Metal Inserts moulded inside seat to connect seat with Galvanized pipes 25 Nominal Bore and 2mm thickness running under the chairs. The pipes are resting above Aluminum bracket at c/c distance from 1.0 to 1.5 mtr and all open ends of all pipes are to be closed by PVC cap. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant colour fading and 5 year against breakage due to manufacturing. Chair Plastic Part should have been tested with xenon –Arc exposure Test as per ISO 4892-2:2013 ,Cycle-1. The Grey Sale Rating should be (GSR) : > 4, Delta Δ E : < 3 Valid Test Certificate to be submitted The seat should pass BSEN 12520 ;2015 TEST

Supplying and fixing of Factory made Precast RCC slabs at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge Size 700 x 500 x 75 mm with steel reinforcemnt not less than 3.0 kgs per unit

"Providing and laying non-pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand ) including testing of joints, etc. complete. B) 250 mm dia RCC pipe"

Supplying and stacking of (contractor's material) Murrum at site,having P.I. Value not more than 6

Laying and spreading 6 mm thick layer of granular material(gravel or murrum) including watering and rolling with hand roller etc. complete.COMPACTED HARDWITH PROCTOR DENSITY 95%

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Supply and installation of Soil finish/Cinder Trackof athletic Sandwich track system.

Providing M.S. footrests including fixing in manholes with 20 x 20 x 10 cm cement concrete block 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) as per standard design.

Supplying and fixing Heavy duty CI manhole cover and frame of " NECO" make,cover weighing not lesser than the following and being a size of 600 x 600 mm for overhead tank including painting with two coats of anticorrosive paint over a coat of primer etc. Rate shall include providing and fixing locking arrangements, fixing the Man-hole cover, grouting the anchors with C.C 1:2:4 as per specification and as directed.Weight Not less than 50 Kg.

Construction of embankement with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300-2 as per MORTH specification 305

Providing and Laying bi-axial extruded geogrid of Maccaferri make or equivalent Type-20S manufactured from high density polythene polymer as base/sub-base reinforcement.(Reference MoRT&H 701).

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTHspecifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.

Design, supply, installation, testing and commissioning on site Sprinkler Irrigation System with the following items of approved make/brand: HDPE pipe PE-80, 63mm O.D., 6Kg/cm2 pressure rating having ISI mark.- min 350 rmt Clapet Valve/ Riser Quake Release Control (RQRC) Valve -14 nos. Portable M.S.tripod stand with Sprinkler nozzle and fittings - 6 nos. Nylon braided hose pipe 3/4" ( 30 mt. roll) - 6 nos. PVC Air valve - 1 no. Clapet riser - 14 nos. Brass full way valve (heavy duty) with wheel of approved quality 50mm NB - 2 nos. Note: The contractor shall design the layout and submit shop drawings and technical details of all items of approved brand/make to be incorporated in the work for approval of Engineer before commencement of work. The afore-mentioned items are minimum requirements and contractor's quote shall also include incorporation of any additional item which may be found essentail/necessary for the successful commissioning and operation of sprinkler irrigation system. The scope of work under this item shall be restricted to the overall size of grass turf.The scope of work under this item shall also include all connected civil works such as excavation, refilling, PCC, plastering brick masonary chambers with heavy duty C.I./precast concrete cover for valves etc. and any other ancilliary works required for successful commissioning of sprinkler irrigation system and as per the direction of Engineer. The Contractor shall consider all above in his quote.

Supply of 10mm aggregate Layer of 100.00 mm thichness for the ground

Laying & high finish grading of 200.00 mm thickness of Fine Sand and Supply and install pitch upper rootzone.

Supply and Laying of Soil Layer of 200.00 mm thickness for Outfield

Turfing Lawns with Fine Grassing including Ploughing, Dressing (Turfing lawns with fine grassing including ploughing, dressing including breaking of clods, removal of rubbish, dressing and supplying doobs grass roots at 10 cm apart, including supplying and spreading of farm yard manure at rate of0.6 cum per 100 sqm)

Maintenance of Lawns or Turfing of Slopes (Maintenance of lawns or Turfing of slopes (rough grassing) for a period of one year including watering etc)

Football Goal Post : Supply and installtion of imported Uprights & Crossbars made from 102mm x 112mm reinforced aluminium with double recess for flush fitting fixings. Reinforced welded aluminium corner joints for improved aesthetics and superior strength, with laser cut internal fixing for exceptionally accurate joints. Injection moulded toughened nylon net clips that won't deteriorate over time. Lock-in T-bar to allow for easy storage of the bottom net bar against upright for pitch maintenance. Reinforced net support system prevents bowing under intense tension. New, heavy duty ratchet winch and webbing strap allows for high-class net shape with the inclusion of a failsafe wire providing 100% security during matches. Lock-in bottom net bar 38mm diameter aluminium bar with ground secure key lock mechanism complete with 4 sockets and whitePolyester powder coated of size 7.32m x 2.44m Set = 2 Goals with 4 x 460mm deep sockets, and net APPROVED BY FIFA Specification

Supplying and erecting 25 m (clear height) High Mast (Top- 150mm, Bottom- 540mm) with HeadFrame suitable for max. 12 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation (excluding luminaries).

Supplying and installation of symmetrical 900W Cool white IP65 Flood Light with suitable angle as required on the high mast.

Supplying & erecting aviation obstruction light consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete.

Making M- 20 cement concrete foundation suitable by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 25 m high mast).

Supplying & erecting street light control panel outdoor type, for three phase 4 wire system having in built astronomical adjustable programmable digital timer 4 pole contactor, with maintenance mode to switch ON lights during time of repairs, Incomer 40A TPN MCCB with outgoing 10A MCB - 11 no.s in the timer operation mode and 10A MCB 1 no. for the aviation light.

Supplying and stacking of (contractor's material) Murrum/earth at site,having P.I. Value not more than 6 & Spreading the earth/hard soil in layers not exceeding 250 mm in depth breaking clods, watering rolling each layer with half ton roller or wooden or steel hammers and rolling every third and topmost layer with power toller of minimum 8 tonne and dressing up in embankment for roads, flood banks, marginal and guide banks and filling up of ground dressing etc. complete.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees grith upto 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MORTH Specification 201

Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankement upto a distance of 100 metres (average lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.as per MORTH Specification 301

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Construction of granular sub-base by providing coarse graded granitic or baslitic material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH Specification 401 i)For Grading I Material

Construction of granular sub-base by providing coarse graded granitic or baslitic material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH Specification 401 ii)For Grading II Material

Providing. Laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORTH Specification 406

Providing and applying primer coat with bitumen or bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per MoRT&H specifications clause 502.Bitumen 80/100 @ 1.00 kg/sq.m.

Providing and applying tack coat with bitumen grade of 80/100 or bitumen emulsion using pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRT&H specifications clause 503.Bitumen 80/100@ 0.375 kg/sq.m

Providing and laying dense graded bituminious macadam with 40-60 TPH Drum Mix type HMP producing an average output of 50 tonne per hour using crushed aggregates of specified grading, premixed with bituminious binder by specified percentage of weight of total mix and filler, transporting the hotmix to work site, with all leads laying with a hydrostatic /hydraulic paver finisher with sensor to control the required grade, level and alignment, rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction using antistripping agent complete as per MoRT&H Specifications Clause 507

Providing and laying 40 mm thick Bituminious/Asphaltic concrete with 40-60 batch type HMP producing an average output of 50 tonnes per hour using crushed aggregates of specified gradings Premixed with bituminious binder at 6.5 % by weight of total mix and filler using Antistripping agent transporting the hotmix to work site with all leads and applying a tack coat @f 2.00 kg/10sq.m. with hot bitumen of 80/100 and laying with hydrostatic/hydraulic power finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory or tandem rollers to achieve the desired compaction complete as per MORT&H specifications clause 509 and 503

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : All works upto plinth level

Providing & laying of minimun 60mm thick factory made Shot blasted cement concrete Interlocking paver blocks of minimum M40 grade made by heavy duty block making machine with strong vibratory compaction and of approved size and design/ shape laid in 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-incharge. The product should comply with IS 15658: 2006 and manufactured by ISO 9001: 2008 certified plant.Size: 150mm x 150mm x 60 mm (Type: Square Shape):Other Colours

Pre-cast cement concrete kerb-stones(factorymade) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. Size 60 cm L x45 cm H x 15 cm T

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)

Providing and laying seal coat sealing the voids in a bituminious surface laid with F.E loader with 1 Cu.m. bucket capacity to the specified levels, grade and cross fall using Type A or B seal coats as per MoRT&H specifications clause 513.

EPDM Rubber Flooring: As per Standards -Providing and Laying 36MM cast in situ EPDM Granules method made of two layered 30mm Base Layer of Cushion Rubber And 6mm Top EPDM Coloured Granules water permeable all weather material with high resistance to UV rays and various weather conditions.

Providing & Fixing Children's Play Area Equipment: Crystal Maze

Providing & Fixing Children's Play Area Equipment::Pony Spring Rider

Providing & Fixing Children's Play Area Equipment:Duck Spring Rider

Providing & Fixing Children's Play Area Equipment:Double Arc Swing

Providing & Fixing Children's Play Area Equipment:FRP Platform MGR

Providing & Fixing Children's Play Area Equipment:Multi seater See-Saw

Providing & Fixing Children's Play Area Equipment:Multi Activity Play Station

Providing & Fixing Children's Play Area Equipment:Net Rock Scramber 2.1Mtrs

Providing & Fixing Outdoor Gym Equipment:ABS Board

Providing & Fixing Outdoor Gym Equipment:Aerial Stroller

Providing & Fixing Outdoor Gym Equipment:Sky Walker

Providing & Fixing Outdoor Gym Equipment:Walker

Providing & Fixing Outdoor Gym Equipment:Aero Rider

Providing & Fixing Outdoor Gym Equipment:Sleek Benches

Providing & Fixing Outdoor Gym Equipment:Dustbins-Bird Bins

Providing & Fixing Outdoor Gym Equipment:Dustbins-Aluminium

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting for landscaping work

Supplying and stacking of good earth (suitable for horticulture work) at site including royalty and carriage (earth measured in stacks will be reduced by 20% for payment)

Supply at site of work well decayed farmyard manure, from any available source approved by the engineer-in charge including screening and stacking as per MORTH Specification 308.2

Supplying of sludge duly stacked at site/store as per MORTH Specification 308.2

Spreading of sludge farm yard manure or/and good earth in required thickness (cost of sludge, farm-yard manure or/and good earth to be paid separately) as per MORTH Specification 307

Grassing with Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed as per MORTH Specification 307

Planting and Maintaing of Flowering Plants and shrubs as per MORTH Specification 307 i)Planting flowering plants and shrubs in central verge.

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Sampurna - 19:19:19

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Urea

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Neem cake

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. MOP - Murrete of Pottash

Supply and application of manure and fertiliser as per horticulture specifications and as instructed by Consultants on site. Micronutrient mix (organic manure)

Supply and application of pesticides and insecticides as specifed by Consultant and as per horticultural specifications on site. Chloropyrifos - 20% EC

Supply and application of pesticides and insecticides as specifed by Consultant and as per horticultural specifications on site. Monocrotophos - 50% EC

Supply and application of pesticides and insecticides as specifed by Consultant and as per horticultural specifications on site. Sevin Powder

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 1.2 m dia and 1.2 m deep

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 90 cm dia and 90cm deep

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm dia, and 60 cm deep.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 45 cm dia, and 45 cm deep.

Half brick circular tree guard, in 2nd class brick, internal diametre 1.25 metre, and height 1.2 metre, above ground and 0.20 metre below ground bottom two courses laid dry, and top three courses in cement mortar 1:6 (1 cement 6 sand) and the intermediate courses being in dry honey comb masonry as per design complete.

Alstonia scholaris height 150-165 cm. in bag size 25 cm, Well developed.

Azadirachta indicia ( Neem ) height 120-130cm in big polybag size 25 cm, Well developed.

Mimusops elengi (Maulsri) height 150-165 cm. in big poly bag size 25 cm, Well developed.

Polyalthia longifolia (Ashok) height 180-195 cm. in gunny bag size 30 cm, Well developed.

Polyalthia pendula (Ashok Pendula) height 180-195 cm. in gunny bag size 30 cm, Well developed.

Bottle palm ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bag

Bismarckia Palm 115 to 180 cm ht. plant, well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot

Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed, well developed

Foxtail palm well developed with fresh & healthy foliage of ht. plant 210 to 240 cm in big 40 cm Cement Pot

Washingtonia filifera palm well developed 90 to 105 cm ht. plant having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot

Maintenance of lawns with fine grassing for the first year including watering, etc.as per MORTH Specification 307

Proving and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid

Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin

Providing and fixing white vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. Overall size 610mmx460mm (24"x18") bowl size 560mmx410mmx215mm (22"x16"x81/2") Glossy. 1.0mm thk,

Providing and fixing G. I. Inlet connection for flush pipes connecting with W. C. pan.

Providing and fixing C.P. bras or M. I. Trap for wash basin and sinks: 32 mm dia

Providing and fixing C.P. bras or M. I. Trap for wash basin and sinks:40 mm dia

Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap.

Providing & Fixing In Position 25 mm diameter mosquito proof coupling of approved municipal design.

Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws 750 x 20 mm size

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws 600 x 20 mm size

Providing and fixing toilet paper holder : C.P. brass

Providing & fixing liquid soap container with C.P. brass lid and brackets fixed to wooden cleats with C. P. brass screws i)Glass container

Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 i)15mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 i)15mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy two way long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 i)15mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993i)15mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 115mm long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993 a)Wall mixer with 115 mm long bend pipe for connection to over head shower.

Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931;1993

Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw

Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work). 40mm nominal bore

Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work) 50 mm nominal bore

Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work) 80 mm nominal bore

Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)

Supplying & erecting cast iron double flange butterfly valve of size 50 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 65 mm dia. complete as per specification no. FF-VL/BFV

Supplying & erecting cast iron double flange butterfly valve of size 80 mm dia. complete as per specification no. FF-VL/BFV

Providing and fixing ball valve (brass) of approved quality High pressure with P.V.C. floats::15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality High pressure with P.V.C. floats::20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality High pressure with P.V.C. floats::25mm nominal bore

Providing and fixing non-return valve of approved quality :25 mm nominal bore

Providing and fixing non-return valve of approved quality :32 mm nominal bore

Providing and fixing non-return valve of approved quality :40 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet:100 mm diameter

Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet:150 mm diameter

Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.c)1000 lit. capacity

Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete :a)100mm diameter

Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete b)150 mm diameter

Providing, laying and jointing glazed stone wear pipes grade “a” with stiff mixture of cement mortar in the proportion of 1:1 (1 cement :1 fine sand) including testing of joints etc. complete c)230 mm diameter

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :a)100 x 100 mm size P type

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :b)150 x 100 mm size –P or S type

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a)Inside size 90 x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455 x610mm internal dimensions total weight of cover ad frame to be not less than 38 kg. (weight of cover 23 kg. )

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. b)Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. c)Inside size 1.2m x 90 cm and 90cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter total weight of cover and frame to be not less than 116 kg. (weight of cover 58 kg).

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete asper standard design.d)Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).

Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20 cm x 20 cm x 10 cm cement concretes including 1:3:6 (cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size):With 20mm x 20 mm square of round bar

Making connection of drain or sewer line with existing manholes including braking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: a)For pipe 100 to 150 mm dia

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:a)110mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating a)110mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :a) 100mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door b)75 mm dia

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: a)110mm dia

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door: b)75 mm dia.

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :a)110mm dia

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door b)75 mm dia

Providing and fixing R.P.V.C. vent cowl:a)110mm dia

Providing and fixing R.P.V.C. vent cowl:75 mm dia

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).15 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).20 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).25 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).32 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).40 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).50 mm outer dia CPVC pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.15 mm dia nominal outer dia pipes.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 20 mm dia nominal outer dia pipes.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 25 mm dia nominal outer dia pipes.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 32 mm dia nominal outer dia pipes.

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement,trenching ,refilling and testing of joints complete as per firectionof the Engineer incharge.(External work (heavy duty SDR 11 pipe)32 mm nominal outer dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement,trenching ,refilling and testing of joints complete as per firectionof the Engineer incharge.(External work (heavy duty SDR 11 pipe) 40 mm nominal outer dia pipes

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement,trenching ,refilling and testing of joints complete as per firectionof the Engineer incharge.(External work (heavy duty SDR 11 pipe)50 mm nominal outer dia pipes

Supplying and erecting Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 1.5 KW/2 HP with discharge 7.16/4.16 Litres per second (LPS) for head of 12/21 m & 50 mm suction/ 50 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP

Supplying and erecting Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 1.5 KW/2 HP with discharge 2.2/4.1 Litres per second (LPS) for head of 8/26 m and 50 mm suction/ 40 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP

Supplying and erecting Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 7.5 KW/10 HP with discharge 9.6/21.6 Litres per second (LPS) for head of 18/40 m and 80 mm suction/ 65 mm delivery pipe of size or with discharge of 4.3/7.8 Litres per second (LPS) for head of 40/64 m and 65mm suction/ 50mm delivery pipe of size, on provided C.C. foundation as per specification no. WP-CGP

Supplying and erecting submersible pumpset of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 20 to 80 LPM discharge at 55 to 25 m head and (max. efficiency at 41 m head & 50 lpm) discharge & delivery Pipe of Size- 50mm dia. with a necessary H type clamps as per specification no. WP-SMP

Supplying and erecting D. O. L. Starter suitable for 250V. Single phase, 50 cycles with overload element with necessary materials and connected to supply upto 3 H.P.

Supplying and erecting D.O.L. Starter 400V. 3 phase, 50 cycles with no volt coil and overload element with necessary materials and connected to supply for 10 H.P.

Supplying and erecting fully Automatic star/delta starter suitable for 12.5 H.P. to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.

Supplying & erecting automatic control panel for 3 Ph, 415 volt,A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Supplying & erecting automatic control panel for 3 Ph, 415 volt, a.c. Submersible/centrifugal pump set upto 30 HP consisting of Star Delta starter having relay range 30-50 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection.Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Providing and fixing P.V.C.Rain water pipes of 160mm outer diameter and having wallthickness of 2.2to2.7mm confirming to I.S .135921992 including proper rain water receiving recess with P.V.C. plug,bend,necessary fittings ,such as,offsets,shoes,inluding fixing the pipe on wall using approved wooden cleatsprojecting 25mm to 40 mm from face of wall a fixing with clips of approved quality and number,filing the join t using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks,including necessarys caffolding and maintenance for 3yrs for any leakages or dislocations of pipes.All the P.V.C. fitting sand additional 2 piece socket clip s shall be go tapproved from engineer in charge etc. complete. [for Rain Water Pipes Vetical&horizontal) 160mm OD

Providing and fixing 15cm rigid PVC Nahani trap including PVC grating,bend,connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface anesting etc.complete(Prior approval of sample and brand by Ex.Engr.is necessary before use)

Providing & fixing SS Grab Bar Euronics Model No. EGR (S02) & SS Grab Rail Euronics Model No. EGR 01 or approved equivalent,Including cutting and making good the walls wherever required.

Providing and fixing vertical storage type hot water heater fixed to wall with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm CP brass non-return valve complete including making connections with 15mm dia CP connecting pipes on inlet and outlet, suitable length of power cable and 15 amps plug. i)Capacity 25 Litres Venus Model Magma 25GV

Providing and fixing fully automatic Hand dryer Euronics Model-EH 26 NW or equivalent ,including all fittings complete in all respect.

Providing and fixing Aerosol Perfume Dispenser Euronics Model-EA 24 or equivalent ,including all fittings complete in all respect.

Providing and fixing Straight Grab Bar, 600 mm length and 35 mm dia made of antibacterial nylon. The item should have base plate support with SS screws (304 grade) & PVC wall plugs.i)Soil, Waste, Vent & Rain Water Pipes

Providing and fixing of GI clamps with EPDM rubber lining Zinc plated for support of vertical soil, waste, vent and rain water pipes, embedded in walls with anchor fastner etc. including cost of cutting holes and making good the walls complete in all respects.i)For 75 mm dia pipe

Providing and fixing of GI clamps with EPDM rubber lining Zinc plated for support of vertical soil, waste, vent and rain water pipes, embedded in walls with anchor fastner etc. including cost of cutting holes and making good the walls complete in all respects.ii)For 100 mm dia pipe

Providing and fixing of GI clamps with EPDM rubber lining Zinc plated for support of vertical soil, waste, vent and rain water pipes, embedded in walls with anchor fastner etc. including cost of cutting holes and making good the walls complete in all respects iii)For 150 mm dia pipe

Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with GI threaded socket caulked to CI soil pipe including cost of lead Joint.i)100 mm dia

Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with GI threaded socket caulked to CI soil pipe including cost of lead Joint ii)150 mm dia

Providing and fixing cast brass clean out plug with suitable insert keys for opening, male threaded joint with GI threaded socket caulked to CI soil pipe including cost of lead Joint iii)75 mm dia

Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain) 50 mm NB (SP+WP)

Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain)40 mm NB (WP)

Providing, fixing, jointing & testing of uPVC agricultural (6kgf/cm2) grade pipes and fittings conforming to IS 4985 -2000 complete with solvent cement jointing with testing of pipes and making the joints leak proof. (For Pipes Buried in Toilets from Wash Basin etc to Main Drain)32 mm NB (WP)

Providing and fixing Thermaflex or K-flex or equivalent thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. 6 mm thick (Concealed Pipes)For 15 mm dia Pipe

Providing and fixing Thermaflex or K-flex or equivalent thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. 6 mm thick (Concealed Pipes)For 20 mm dia Pipe

Providing and fixing Thermaflex or K-flex or equivalent thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. 6 mm thick (Concealed Pipes)For 25 mm dia Pipe

Providing and fixing Thermaflex or K-flex or equivalent thermal insulation tubing a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. 6 mm thick (Concealed Pipes) For 32 mm dia Pipe

Providing and fixingThermaflex or K-flex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.13 mm thick (Exposed Pipes)For 20 mm dia Pipe

Providing and fixingThermaflex or K-flex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.13 mm thick (Exposed Pipes) For 25 mm dia Pipe

Providing and fixingThermaflex or K-flex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.13 mm thick (Exposed Pipes) For 32 mm dia Pipe

Providing and fixingThermaflex or K-flex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.13 mm thick (Exposed Pipes)For 40 mm dia Pipe

Providing and fixingThermaflex or K-flex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.13 mm thick (Exposed Pipes) For 50 mm dia Pipe

Providing and fixingThermaflex or K-flex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including protection by wrapping with 24 gauge alumminium sheet with riveted screw joints all required accessories complete as per specification.13 mm thick (Exposed Pipes)For 65 mm dia Pipe

Providing and fixing forged brass single acting air release valve with screwed inlet 25 mm dia.

Providing & fixing heavy forged brass ( chrome plated ) tested ISI marked Ball valves as per ( IS:554 /B5:21/ISO : 7 full bore design ) of approved quality for 15 mm to 40 mm etc complete 32 mm nominal bore

Providing & fixing heavy forged brass ( chrome plated ) tested ISI marked Ball valves as per ( IS:554 /B5:21/ISO : 7 full bore design ) of approved quality for 15 mm to 40 mm etc complete 40 mm nominal bore

Providing & fixing heavy forged brass ( chrome plated ) tested ISI marked Ball valves as per ( IS:554 /B5:21/ISO : 7 full bore design ) of approved quality for 15 mm to 40 mm etc complete 50 mm nominal bore

Providing, fixing, jointing & testing of UPVC pipe Type-B for Soil, Waste upto 160mm dia. confirming to IS 13592 cut to required lengths including all necessary fittings and specials such as as 45 or 90 deg. bends, Tee's, Y's, access pipe with solvent cement jointing. Setting the pipes in cement concrete M-15 as per specifications after testing of pipes. (For Pipes buried in flooring- Internal drainge )110 mm

Providing, fixing, jointing & testing of UPVC pipe Type-B for Soil, Waste upto 160mm dia. confirming to IS 13592 cut to required lengths including all necessary fittings and specials such as as 45 or 90 deg. bends, Tee's, Y's, access pipe with solvent cement jointing. Setting the pipes in cement concrete M-15 as per specifications after testing of pipes. (For Pipes buried in flooring- Internal drainge ) 75 mm

Providing, fixing, jointing & testing of UPVC pipe Type-B for Soil, Waste upto 160mm dia. confirming to IS 13592 cut to required lengths including all necessary fittings and specials such as as 45 or 90 deg. bends, Tee's, Y's, access pipe with solvent cement jointing. Setting the pipes in cement concrete M-15 as per specifications after testing of pipes. (For Pipes buried in flooring- Internal drainge )150 mm

Providing & fixing in position 80mm NB "P" type trap of self cleaning type (inlet to "P" trap to be 100mm dia) including brass 125mm dia CP grating, drip seal jointing embeding in concrete etc. all complete.

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete.(EXTERNAL SEWER) 160 mm OD

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete.(EXTERNAL SEWER) 200 mm OD

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete.(EXTERNAL SEWER) 250 mm OD 2 Outgoings of 4 KW DOL WITH MPCB OLR & 4 Outgoings of 5.5 KW Star Delta WITH MPCB OLR - 2 Outgoings of 4 KW DOL WITH MPCB OLR & 4 Outgoings of 5.5 KW Star Delta WITH MPCB OLR

Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge. (Pumps shall be installed in a set of two pumps One working and One standby) Sump Pump(Pumps to be suitable to handle solids upto 30 mm size)Capacity - 3.35 LPS (Each)(1W +1SB)Head - 15 M

Providing and fixing resilient rubber neoprene lined stylearch vibration eliminators suitable for raw water upto 45 deg.C.Temperature working pressure upto 25 Kg/Sqcm. 80mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 65mm dia

Supplying and erecting ISI mark GI pipe 32 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 40 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 50 mm. dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 65 mm. dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 75/80 mm dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting ISI mark GI pipe 100 mm dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Supplying and erecting cast iron double flange NRV of size 100 mm dia complete as per specification no. FF-VL/NRV

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no.FF-VL/HV

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe,63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying & erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ

Supplying and erecting 20/25mm dia gun metal air release cock,with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve,and G.I. pipe, elbow etc.complete as per specification no. FFFA/ PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting one no. brass orifice plate having 6 mm.thickness, 140 mm outer dia and required/proper diameter of inner hole at every single outlet hydrant valve as per specification no.FF-FFA/OP

Providing and fixing ball valve (brass) of approved quality : High pressure with P.V.C. floats:15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality : High pressure with P.V.C. floats:20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality : High pressure with P.V.C. floats:25mm nominal bore

Providing Round bottom fire bucket of 9 Litres capacity as per IS :2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall..

Supplying and erecting D.C.P. type fire extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6 mm M.S.flat with nuts & bolts grouted in wall complete.

Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 450 LPM at 35 m head 7.5 HP (5.5 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP

Cables : Supply & laying " XLPE cables" on walls or through existing trenches etc. (SP-ME-TS- 6) LV Cables of following sizes to be laid buried in ground/ laid in cable trays in ready made trenches, cables shall be fitted on wall / ceiling by the means of saddle & spacers. Miscellaneous items such as cable dressing accessories like nylon tie, Aluminium clamps, GI cleats, cable tags etc. are included in the scope. Removal of empty drums, cartoons and making the site normal as instructed by Purchaser.1.1 kV grade stranded Al conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables - 4C x 6.0 Sq.mm

Cables : Supply & laying " XLPE cables" on walls or through existing trenches etc. (SP-ME-TS- 6) LV Cables of following sizes to be laid buried in ground/ laid in cable trays in ready made trenches, cables shall be fitted on wall / ceiling by the means of saddle & spacers. Miscellaneous items such as cable dressing accessories like nylon tie, Aluminium clamps, GI cleats, cable tags etc. are included in the scope. Removal of empty drums, cartoons and making the site normal as instructed by Purchaser.1.1 kV grade stranded Al conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables -2C x 2.5 Sq.mm

Cable End Termination For Aluminium Cables : (SP-ME-TS-6) Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of aluminium lugs for aluminium cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessories 2C x 2.5/4 Sq.mm

Cable End Termination For Aluminium Cables : (SP-ME-TS-6) Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of aluminium lugs for aluminium cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessories 4C x 6.0 Sq.mm

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A/R32 and copper condenser at position. specification no. AP-AC/SAC

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position. specification no. APAC/ SAC

Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 12 mm complete.

Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 16 mm complete.

Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 1000 cfm capacity with maintaining the static pressure minimum 20 mm of Hg complete suitable to operate on 1ph, 230 V, 50Hz, A.C. supply.

Supply, installation, testing and commissioning cordless remote contol having colour LCD panel, real time clock, temperature limitation (16 to 30 degree Cent.), functions like filter clean reminder timer suitable to communicate with wired controller complete.

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete.

Supply, fabrication, installation an testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete.

Supplying and installing of coller damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of required size

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45 degree.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white)-25mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white)-32mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. SCH-40(blue)/(white)-40mm outer dia.

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & fixing of M.S. Stand & Bracket for fixing Indoor & Outdoor unit.

GSS Ducting:- Supplying fabrication installation testing and commissioning of GI. Sheet metal ducting. Zinccoated. Complete with all Standard Accessories, G.I..Hardware, Self Adhesive elastomeric foam gasket,Support etc as per SMACNA specification.-24 Gauge

GSS Ducting:- Supplying fabrication installation testing and commissioning of GI. Sheet metal ducting. Zinccoated. Complete with all Standard Accessories, G.I..Hardware, Self Adhesive elastomeric foam gasket,Support etc as per SMACNA specification.-22 Gauge

Providing fresh air damper with crowl piece,bird screen and removable type prefilters

Providing, fixing, testing and commissioning of 1300 CFM Inline Ex. Fans of G.I. construction complete with Axial flow Inline fan - Locker Exhaust Air

Providing, fixing, testing and commissioning of 400 CFM Inline Ex. Fans of G.I. construction complete with Axial flow Inline fan. - Toilet Exhaust Air

Providing, fixing, testing and commissioning of 700 CFM Inline Ex. Fans of G.I. construction complete with Axial flow Inline fan. - Spectator Toilet Female Exhaust Air

Providing, fixing, testing and commissioning of 1500 CFM Inline Ex. Fans of G.I. construction complete with Axial flow Inline fan. - Spectator Toilet Male Exhaust Air

Supplying, installing, testing and commissioning of SISW (Single inlet single width) centrifugal fan as per specification, with statically and dynamically balanced backward curved blades, galvanized steel housing, maintenance free bearings, belt driven complete with totally enclosed fan cooled squirrel cage induction motor, centrifugal fan belt drive and vibration isolators. Motor shall be suitable for 415±10% volts, 50 cycles, 3 phase AC supply & meeting criterion asperASHRAEstandard90.1-2016 and high efficiency (IS 12615) . Minimum 20 mm (WC) external static pressure after fan outlet.The cost including the Panel for the Fans. Necessary copper earthing should also be included. Cabling and earthing as required from Fan Elec.Panel to Fan motor shall be considered as included in this scope & no separate measurements shall be considered for this lumpsum item. Duty: Kitchen Exhaust, Capacity: 6000 CFM, Static Pressure : 40 mm wg, Fan Motor HP : 4.5 HP or as per requirement

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.'(c) Group C -- with Cat A Modular Accessories

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.'(a) with Cat A Modular accessories

Wiring for 5A /15A power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for 5A /15A power plug with 4 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) alongwith 2 Nos of 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.'(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

'Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.(h) 4 x 2.5 sq.mm + 2 x 2.5 sq.mm earthwire (25mm Conduit)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface rigid PVC conduit( medium)/ casing caping, as required.'(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire

Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.'(a) 20 mm

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.'(b) 25 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required'(a) 75 mm x 75 mm x 60 mm deep metal box

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required'(b) 100 mm x 100 mm x 60 mm deep metal box

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required'(c) 150 mm x 75 mm x 60 mm deep metal box

'Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required(d) 150 mm x 150 mm x 60 mm deep metal box

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required'(e) 180 mm x 100 mm x 60 mm deep metal box

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required'(f) 200 mm x 125 mm x 60 mm deep metal box

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (a) 5/6 A switch Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required'(b) 2 way 5/6 A switch Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required'(c) 15/16 A switch Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required'(d) 3 pin 5/6 A socket outlet Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc.as required'(e) 6 pin 15/16 A socket outlet Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required'(f) Telephone socket outlet Cat A

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required'(g) TV Antenna socket outlet Cat A

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (a) Cat A

Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required'(a) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required'(a) 1 or 2 Module ( 75 mm x 75 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required'(b) 4 Module ( 125 mm x 7 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required'(c) 6 Module (200mm x 75 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required'(d) 8 Module ( 125 mm x 125 mm) Cat A

Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required'(e) 12 Module (200 mm x 150 mm) Cat A

Erection of wall bracket/ ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting complete with all accessories including connections etc as required.

Supplying and fixing stiff pendant with 300 mm long 20 mm dia x 1.6 mm thick steel conduit aluminium cast back plate and brass holder complete including wiring the down rod with 1.5 sq.mm FR PVC insulated copper conductor single core cable and painting etc. as required.

Supplying and fixing stiff pendant with 600 mm long 20 mm dia x 1.6 mm thick steel conduit aluminium cast back plate and brass holder complete including wiring the down rod with 1.5 sq.mm FR PVC insulated copper conductor single core cable and painting etc. as required.

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 4 nos 3 pin 5/6 A modular socket outlet and 4 nos 5/ 6 A modular switch connection painting etc. as required. The scope of work includes alternate arrangement, if required as per site conditions, to provide switches and sockets seperately, above and below the table respectively. ( For workstations) (a) Cat A

Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 1 no 6 pin 15/16 A modular socket outlet and 1 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations)'(a) Cat A

Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 2 no 6 pin 15/16 A modular socket outlet and 2 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations)-(a) Cat A

Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 4 nos 3 pin 5/6 A modular socket outlet and 4 nos 5/ 6 A modular switch connection painting etc. as required. The scope of work includes alternate arrangement, if required as per site conditions, to provide switches and sockets seperately, above and below the table respectively. ( For workstations)'(a) Cat A

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 2 no 6 pin 15/16 A modular socket outlet and 2 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations)'(a) Cat A

Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing required number of modular switches , connection painting etc. as required. ( For group controlled points)'(a) Cat A

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing required number of modular switches , connection painting etc. as required. ( For group controlled points)'(a) Cat A

Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. '(a) Cat A

Supplying and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch on board the modular surface/recessed PVC/GI modular box by suitably increasing its modular capacity, modular plate and cover including connection painting etc. as required. '(a) Cat A

Installation, earthing, testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm FR PVC insulated copper conductor single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Carriage of ceiling fan and regulator/ exhaust fan from store to site as required.

Installation, earthing, testing and commissioning of exhaust fan upto 450 mm sweep in the existing opening including making the hole to suit the size of the above fan making good the damage connections testing commissioning etc as required

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)'(b) 8 way single door Cat A

Supplying and fixing following way TPN sheet steel, single door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)'(f) 12 way ( 8 + 36) single door horizontal type Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.'(a) SP, Cat A

Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.'(e) TPN, Cat A

Supplying and fixing SP blanking plate in the existing MCB DB complete as required

Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required'(b) 40 A, Cat A

Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required'(c) 63 A, Cat A

Supplying and fixing following rating four pole (triple pole and neutral) 415 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required(c) 63 A, Cat A

Providing and fixing M.V. Danger Notice plate of 200mm x 150 mm made of mild steel atleast 2 m thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required

Providing and fixing HT Danger Notice plate of 250mm x 200 mm made of mild steel atleast 2 m thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement'(a) In soily strata

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement'(b) In rocky strata

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs. e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement'(a) In soily strata

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs. e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement'(b) In rocky strata

Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

Extra for using salt and coke for GI or copper plate earth electrode as required( 240 Kgs of Coke and 5 Kgs of Salt)

Supplying and laying 8 SWG copper wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required

Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required

Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Supplying and laying 25 mm x 5 mm copper strip in 40 mm dia GI pipe from earth electrode as required

Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required

Providing and laying earth connection from earth lectrode with 6 SWG dia GI wire in 15 mm dia GI pipe from earth electrode as required

Providing and laying earth connection from earth lectrode with4 mm dia copper wire in 15 mm dia GI pipe from earth electrode as required

Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required

Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for coneections etc. as required

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing . as required

Providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing . as required

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc as required

Constructing a special masonry inspection chamber for earthing system as per the enclosed drawing and specifications. The square chamber( 860 x860mm) shall be constructed with brick masonry of 230 mm on a solid base of 75mm rubble packing and 75mm PCC. The floor level shall be finished with 50mm cement concrete. The inside wall of the chamber shall be plastered with 12mm plaster finish. A removable CI/RCC cover of size 400x 400mm on a angle box frame of 35x35x5mm shall be provided with locking arrangements/ lifting lugs. The scope of work includes all material labour etc complete as required.

Supplying and drawing/fixing jelly filled unarmoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.'(a) 5 Pair

'Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.(d) 50 Pair

Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required.'(a) 10 Pair

Supplying, erecting and commissioning of Discoonection type Krone Module, ITD.DOT approved, having capacity of 10 pairs with silver plated terminal contacts, complete as required.

Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required'(a) Cat 6

Supplying and drawing of Co-axial TV cable of required grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required'(b) RG - 6

Supplying and drawing of Co-axial TV cable of required grade, solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required(c) RG - 11

'Supplying, drawing, connecting, testing and commissioning of shielded, twin twisted and stranded single core PVC insulated ( white PVC sheathing with colour skinning) FRLS copper conductor cable in existing surface/recessed steel/PVC conduit of approprriate size including connections etc. complete as required of following size.(a) 2 x 1.5 sq.mm

Supplying, drawing, connecting, testing and commissioning of shielded, twin twisted and stranded single core PVC insulated ( white PVC sheathing with colour skinning) FRLS copper conductor cable in existing surface/recessed steel/PVC conduit of approprriate size including connections etc. complete as required of following size.'(b) 4 x 1.5 sq.mm

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. -CAT A

Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with modular TV socket including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT A

'Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 1/2 Core 25 sq.mm

'Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.- 3 1/2 Core 35 sq.mm

'Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 1/2 Core 50 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.- 3 1/2 Core 70 sq.mm

'Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 1/2 Core 95 sq.mm

'Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 1/2 Core 120 sq.mm

'Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 1/2 Core 150 sq.mm

'Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-31/2 Core 185 sq.mm

'Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 1/2 Core 240 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 1/2 Core 300 sq.mm

Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.' 4 Core 4 sq.mm

Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm

'Supply of 4 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 10 sq.mm

'Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 Core 1.5 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.' 3 Core 2.5 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.' 3 Core 4 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 Core 6 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-3 Core 10 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 2.5 sq.mm

'Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.-4 Core 4 sq.mm

'Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 6 sq.mm

'Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 10 sq.mm

'Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments.(4) 3 Core 95 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing masonry open duct, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 400 sq.mm in the existing masonry open duct, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required

Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 400 sq.mm direct in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 400 sq.mm direct in the existing masonry open duct. complete as required

Supply of cable route marker 20 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required. For HT cable.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.-'(1) 3 x 1.5/2.5 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(2) 3 x 4 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(3) 3 x 6 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(1) 3 1/2 x 25 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(2) 3 1/2 x 35 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(3) 3 1/2 x 50 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(4) 3 1/2 x 70 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(5) 3 1/2 x 95 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(6) 3 1/2 x 120 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(7) 3 1/2 x 150 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(8) 3 1/2 x 185 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(9) 3 1/2 x 225 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(10) 3 1/2 x 240 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(11) 3 1/2 x 300 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(1) 4 x 1.5/2.5 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(2) 4 x 4 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(3) 4 x 6 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(4) 4 x 10 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.'(5) 4 x 16 Sq. mm.

Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required.'(b) 11 KV, 3 Core x 50 - 95 sq.mm

Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required.'(b) 11 KV, 3 Core x 50 - 95 sq.mm

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.-150mm width x 50mm depth

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.-300mm width x 50mm depth

Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.-150mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.-300mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.-150mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray reducers of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.-300mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.-150mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray tees of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.-300mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray cross of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.150mm width x 50mm depth (16 SWG)

Supplying and Installing following size perforated type , M.S.cable tray cross of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required.300mm width x 50mm depth (16 SWG)

11 KV HT Metering Panel (SEB's) Supplying, erecting, testing and commissioning 11 KV HT metering cubical (compact type) approved by MSEDCL/licensee fabricated with 2 mm (14 SWG) M.S.sheets with supporting angle and channel, painted with powder coating / epoxy paint of required shade copper bus bar size 25 x 6 mm electronic security lock and heavy duty mechanical lock, with counter meter for measuring no of times the opening of doors, top side cover ( CT, PT cover) interlock with meter doors, epoxy coated 3 nos CT having required ratio between 5/5A to 50/5A, VA10,Class0.5S, 11000/V3/110/V3 VA 50, class 0.5 epoxy terminal block suitable for provided trivector meter, and provision for incoming and outgoing cables etc.complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation

11/.433 KV Transformer -Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 160 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 670 Watts at 50% load, 1950 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II with necessary permissions of Electrical Inspector, as per specification no SS- TR.

Supplying, erecting and commissioning of diesel generating set with alternator of 200 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled /liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG

Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying and erecting LED square / circular 9 to 12W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete

Supplying and erecting decorative oval bulk head edge-lit10W LED luminaire comprising of high brightness LED Fitting on provided PVC block / wooden board.

Supplying and erecting LED Mirror Light with integrated driver including 7W to 9W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete.

Supplying and erecting cylindrical shaped integral decorative with high power 12W-16W LED bollard upto 1000mm with opal acrylic diffuser and IP65 protection on provided foundation complete.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Providing and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 R.P.M. Oscillating type, plastic or metal blades chrome plated guard with regulator and moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF

1 - no. Circuit Breaker control switch for electrical (T/N/C)

1- Triple pole numerical I.D.M.T. overcurrent & earth fault relay with two outer elements connected for overcurrent protection and the middle element for earth fault protection over current setting 50%-200% Earth fault setting 20% - 80% (51 and 51N)

1 - Electro mechanical Master trip relay (86)

1 - Electro mechanical Anti pumping relay (94)

1 - Trip Circuit supervision relay.

1- set of Red/Green indicating lamps for close and open position

1- Amber indicating lamp for auto trip

1- clear indicating lamp for trip circuit healthy

1- set of white indicating lamps one per phase

1 - blue indicating lamp for spring charged

1 - push button on front door for emergency trip

1- Four window annunciation display to indicate fault trip of incoming and outgoing feeders including audio alarm hooter with accept push button, internal wiring,protection fuses etc. complete.

1-cable box suitable for cable termination to receive 11KV XLPE Cable 3Core 300 sqmm.

1 Set of Power Pack 220 Volt A.C. / 24 Volt D.C. complete & suitable as required for the complete item.

TWO NOS OUTGOING FEEDERS - One No for TRANSFORMER FEEDERS AND ONE No. Spare, EACH EQUIPPED WITH:

1- Air insulated metal clad housing

1- Set of 3 phase PVC insulated copper busbars 630 amps

6- Single pole cluster type isolating contacts; i.e. plug and switches

1-Triple pole draw out truck mounted 11kV 350MVA, 630amps Vacuum circuit breaker fitted with arc control devices.

1- Trip free 230 V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches emergency hand trip device and mechanical 'OFF' and 'ON' indicator.

6 NO/NC contacts for remote ON/OFF/TRIP status at BMS

1 - 24 volts DC shunt trip coil

3 - Dual Core Cast resin Current transformers of ratio 60/5 Class 5P10 and Class 0.5, 15 VA burden for protection & metering.

1- Strip heater to prevent absorption of moisture

1- Triple pole numerical I.D.M.T. over current and earth fault relay, with two outer elements connected for over current and the middle element for earth fault protection over current setting 50% - 200% Earth fault setting 20% -80% and with instantaneous element on all 3 pole settings 500- 2000% on over current and 200-800% on earth fault (51,50,51N&50N)

1 - Electro mechanical Master trip relay (86)

1 - Electro mechanical Anti pumping relay (94)

1 - Trip Circuit supervision relay.

1 - set of electro mechanical auxiliary relay for OLTC

1- set Electro mechanical auxiliary relay for transformer fault ALARM for winding temperatureconditions

1- set Electro mechanical auxiliary relay for transformer fault TRIP for winding temperature conditions

1 - no. circuit breaker control switch for electrical (T/N/C)

1- set of Red/Green indicating lamps for close and open position

1- Amber indicating lamp for auto trip

1- clear indicating lamp for trip circuit healthy

1- set of white indicating lamps one per phase

1 - blue indicating lamp for spring charged

1-cable termination suitable for cable joint to receive 11KV XLPE cable 3 core 300 sqmm.

1- Eight window annunciation display to indicate fault trip of incoming and outgoing feeders including audio alarm hooter with accept push button, internal wiring, protection fuses etc. complete.

The switchboard shall be complete with all interconnections, label wiring, etc as required and as per direction-Supplying, Installation, Testing & Commissioning of 11 kV HT Panel as described above

Supplying, Installation, Testing & Commissioning of 11 kV HT Panel as described above

Supply, errection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as directed by Engineer Incharge.Supplying, Installation, Testing & Commissioning Rate for 24V DC Batteries charger as described above

Supply, installation, testing and commissioning of exhaust pipe fabricated out of 6 mm thick MS pipe Class C Heavy Duty including suitable bends, flanges & reducers etc. conforming to IS:3589 with all fixing accessories and hardwares.The work include necessary cladding of exhaust pipe work using 50 mm thick Loosely bound resin (LBR) mattress/ mineral wool/ Rockwool, density not less than 120 kg/m3 and aluminium cladding (0.6 mm thick) for the complete portion. The exhaust pipe work includes necessary supports, foundation etc. to avoid any load & stress on turbo charger / exhaust piping.The exhaust pipe shall be run along the existing wall of the building duly clamped/supported on independent structure for which, the design and Drawing for such structure shallbe got approved from theEngineer-in-charge. - 100mm dia "4mm" thick

Providing and fixing in position following size of heavy duty stainless steel flanged expansion bellows with G.I.nut bolt washers for DG fume piping complete with GI nut bolt washers etc. complete as required.100 mm dia

Providing & fixing for MS support structure for exhaust fume pipes from DG Sets (Exhaust Pipe to be measured and paid for separately) along horizontal and vertical runs upto the height (as per CPCB norms) including cutting, welding etc. and applying two coats of red oxide and two coats of synthetic enamelled paint of colour and shade as directed by Engineer-In- Charge. The design of the support structure shall be done by the contractor and shall be as per CPCB norms approved, also to get the approval from the client/consultant before execution etc. as required.

ALL LT PANELS SPECIFIC INCLUSIONS:

The outgoing feeders as indicated below shall have suitable range of followings (except capacitor feeders).

All ACB's shall be suitable for minimum 50 kA as specified in the items (Icu=Ics=Icw for 1 sec.)

All MCCB's shall be suitable for unless otherwise specified in the item (Icu=Ics= 1 sec=100%.)

All Outgoing Feeders of Main LT panel shall have Digital Multifunction Meter with Control SP MCB

Necessary control and firing card with proper control wiring and lugs of the required rating to be provided.

Each Incomer shall have Surge Protection Device.

Wiring with space heater, thermostat and control MCB's shall be provided for all vertical sections of main LT panel.

All Outgoing Feeders shall have LED type Indication Lamps for ON/OFF indication with suitable wiring, SP MCB etc.

All breakers shall be interlocked as per schematic diagram through PLC with Auto load management control.

All incoming as well as outgoing feeders shall have padlocking facility.

Suitable danger board shall be provided.

All MCCB’s shall be provided with front rotary handle and operating mechanism for door interlock with Padlocking of MCCB’s handles in“OFF” Position.

The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers wherever more than two nos. of cables are terminated in the breakers.

All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier formation.

All distribution sub panels shall be provided with class 0.5 accuracy meters as well as CTs.

All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire.

Panels shall be Powder Coated with Siemens grey paint shade no. RAL-7032 of IS-5.

All motor feeders MCCBs shall be of motor duty.

Supporting/Base rigid steel framework.

TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.

All Back access panel shall be housed with encapsulated Spark gap based class-1/type-1 SPD with in built fuse for each incomer at each Bus Section of 100kA 10/350mS as per IS/IEC 62305-3 LPL-I. All front operated panel/Sub panels shall be housed with Mov based class-2/type-2 SPD with in built fuse for each incomer at each Bus Section of In 10kA&Irms20kA 5/20mS as per IS/IEC 62305-3 LPL-I.

BACK ACCESS PANELS WITH ACB's

Design, fabrication, assembly, wiring and supply, erection , testing and commissioning of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 43 ingress protection) main switchboards conforming to IEC-61439 suitable for use at 433 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 36kA (specified with the panel) at 433 volts, fabricated from 2 mm outer thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including earth strip of required size with 2 nos. earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with nine tank process complete with interconnections etc. as per specifications, as required and as below. The incoming and outgoing feeders shall be accommodated in a modular arrangement, detachable gland plates, adequate size cable alley, Sign writing, Painting, Earthing, Numbering, Danger plate, including PVC insulated copper FRLS wires of minimum 1.5sq.mm & 2.5sq.mm for CT's etc. complete as required as per specifications and drawing attached. A fairly uniform coating of 80 or better microns shall be provided.

MAIN LT Panel (Indoor Type)

INCOMER FROM TRANSFORMER

1 Nos. 315 A 4P MCCB, 25 kA breaking capacity and rotatry handle with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with Control SP MCB.

1 Sets - digital multifunction meter (showing harmonics along with all other electrical parameters such as voltage, current, Hz, KW, KWHr, PF) with RS 485 port with matching cast resin CT's

1 nos. indicating LED lamps for ACB On/Off/ Trip with protective SP MCB's.

1 Sets of CTs of the ratio 300/5A for APFC Relay, Burden 15 VA

1 Sets of CTs of the ratio 300/5A with class 0.5 Accuracy for Metering, burden 15 VA

1 No. 300/5A , 15 VA, 5P10 CT's for Protection

1 No. Under Voltage relay (59)

Negative Phase protection Relay, reverse power relay

INCOMER FROM DG SYNC PANEL - (1 Nos. 250 KVA)

1 Nos. 315 A 4P MCCB, 25 kA breaking capacity and rotatry handle with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with Control SP MCB.

1 Sets - Digital Multifunction Meter (showing harmonics along with all other electrical parameters such as Voltage, current, Hz, KW, KVA, KVAR, KWh, PF.) with RS 485 port with matching cast resin CT's

1 Nos. of Red, Yellow & blue LED type 22.5 mm dia. Indicating lamps with protective SP MCB's

1 No. 3 phase and neutral, neutral to earth (minimum 10 mode) surge suppressor for 50KA along with necessary fuses.

1 Set- of ON/OFF/Trip indicating lamps.

1 No. Under Voltage relay (59)

1 No. Over & under frequency relay

Negative Phase protection Relay, reverse power relay

1 No. 300/5A , 15 VA, 5P10 CT's for Protection

24 V DC Shunt trip Coil-1 Set

240 V AC under Voltage release-1 set

Breaker control switch-1 set

Auxilliary contacts required for necessary interlocking of breakers

BUS BARS

1 Sets of 400A 4P Aluminum busbars with colour coded heat shrinkable PVC sleeves

OUTGOINGS

2 Nos. 200 A 4P MCCB, 36 kA breaking capacity and rotatry handle with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with Control SP MCB. (Lighting & Power Panel & HVAC Panel)

1 Nos. 250 A 4P MCCB, 25 kA breaking capacity and rotatry handle with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with Control SP MCB. (Fire Fighting Panel)

3 Nos. 100 A 4P MCCB, 25 kA breaking capacity and rotatry handle with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with Control SP MCB.

4 Nos. 63 A 4P MCCB, 25 kA breaking capacity and rotatry handle with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with Control SP MCB.

Note: Incomers for Transformer, D.G. Synch Panel shall be electrically & mechanically interlocked, as required.

In case of PLC failure, Provision of manual operation for all Incomer of Main LT Panel with on off slector switch.

Supplying, Installation, Testing & Commissioning of Main LT Panel as described above

Capacitor Panel (40 kVAR) - (Indoor Type )

INCOMER

i) 100Amp. 3 Pole + NL MCCB - 1 Set

1 No. 100 Amp TPN motorised moulded case circuit breaker of (25KA Ics Value) with O/L, S/C, E/F protection as per specification.) with Set of Digital flush type calibrated Intelligent multifunction meters (with communication port) suitable rating class -0.5 accuracy , showing V, A, KW with 3 Nos. cast resin current transformers of dual core CT's of suitable Amp. ratio, 5 VA class 1 metering. , Spreader links and phase barrier, solid neutral link complete with wiring , connections etc.

METERING & INDICATION

1 set of phase indicating lamps

1 No. 6 Stage Microprocessor APFC controller/Relay shall continuously monitor all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand,KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 485 C port. Controller should mounted on the front side of the panel. Panel shall be suitable for Auto/Manual operation and shall be provided as per technical specifications.

BUS-BAR

Electrolytic high conductivity Aluminium extensible three phase and neutral busbars rated at 100 amps , & auxiliary Bus Bars of suitable capacity insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints having a maximum current density as per Indian standards suitable to with stand symmetrical fault level of 36 kA at 433 volts i/cDMC/SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. The neutral busbar is to be of full capacity.

OUTGOINGS

1 No. of 63A TP MCCB (25 KA) each with

1 Nos. 20 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly. with suitable size capacitor duty contactor, start/stop Push buttons, ON/OFF indication Lamps, Auto/ manual switch complete with wiring in all respects.

1 No. of 40A TP MCB (25 KA) each with

1 Nos. 10 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly. with suitable size capacitor duty contactor, start/stop Push buttons, ON/OFF indication Lamps, Auto/ manual switch complete with wiring in all respects.

2 No. of 32A TP MCB (25 KA) each with

2 Nos. 5 KVAR capacitor Bank each with 7% harmonic & discharge resistor suitable capacity to carry expected current continuosly. with suitable size capacitor duty contactor, start/stop Push buttons, ON/OFF indication Lamps, Auto/ manual switch complete with wiring in all respects.

Note: The capacitos shall also stipulate the following

(i) All the capacitors shall be suitable for 525 V

(ii) Necessary control and fixing card with proper wiring and lugs of the required rating to be provided.

(iii)Suitable exhaust fans, ventilation louvers to be provided force cooling.

(iv) LED indication lamps for number of capacitor banks ' ON & Power Factor lagging or leading.

(v) The APFC shall be protected from following

* Over- voltage& Voltage unbalance

* Over temperature-system should be in standby mode and automatically restart after above condition restored.

(vi) Capacitor Panel shall be design to maintain Total Harmonic Distortion ( Voltage Component) of entiresystemto beless than 3%.

Supplying, Installation, Testing & Commissioning of 200 Kvar Capacitor Panel as described above

HVAC ODU Panel

INCOMER

2 Nos. 250 A 4P MCCB, 36 kA breaking capacity and rotatry handle with ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with Control SP MCB. (Lighting & Power Panel & HVAC Panel)

METERING & INDICATION

1 Set - digital multifunction meter (showing harmonics along with all other electrical parameters such as voltage current, Hz, KW, KWHr, PF.) with RS 485 port with matching cast resin CT's

1 Set of indicating LED lamps for On/Off with protective SP MCB's.

1 Set of CTs of the ratio 630/5A with class 0.5 Accuracy for Metering, burden 15 VA

BUSBAR

250A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

1 Nos. 100A FP MCCB ,25 kA breaking capacity

30 Nos. 63A 4P MCB .

Supplying, Installation, Testing & Commissioning of HVAC ODU Panel as described above

PHE Panel

INCOMER

1 No . 125 Amp FP moulded case circuit breaker of (25KA Ics Value) with O/L, S/C, E/F protection as per specification.

METERING & INDICATION

1 Set - digital multifunction meter (showing harmonics along with all other electrical parameters such as voltage current, Hz, KW, KWHr, PF.) with RS 485 port with matching cast resin CT's

1 Set of indicating LED lamps for On/Off with protective SP MCB's.

1 Set of CTs of the ratio 250/5A with class 0.5 Accuracy for Metering, burden 15 VA

BUSBAR

300A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

4 Nos. 63A 4P MCB with Starter Panel

2 Nos. 32A 4P MCB with Starter Panel

2 Nos. 32A 4P MCB .

Supplying, Installation, Testing & Commissioning of PHE Panel as described above

High Mast Lighting Panel

INCOMER

1 No. of 250A 4P electrically operated Draw out type ACB with Ics=Icu=Icw+50 kA having Mircroprocessor based releases for O/L, S/C & E/F.

METERING & INDICATION

1 Set - digital multifunction meter (showing harmonics along with all other electrical parameters such as voltage current, Hz, KW, KWHr, PF.) with RS 485 port with matching cast resin CT's

1Set of indicating LED lamps for ACB On/Off/ Trip with protective SP MCB's.

1 Set of CTs of the ratio 630/5A with class 0.5 Accuracy for Metering, burden 15 VA

BUSBAR

250A TPN Aluminium Bus Bar with colour coded PVC Sleeves

OUTGOINGS

6 Nos. 63 A FP MCCB ,25 kA breaking capacity

2 Nos. 40A 4P MCB , 10 kA breaking capacity

Supplying, Installation, Testing and Commissioning of Indoor Sports Complex - Main LT Panel as described above

Supplying,Receiving, fixing, testing & commissioning of the described Panel-EXTERNAL LIGHTING PANEL (Outdoor Type weather proof, double door with canopy and suitable MS Structure stand duly painted),INCOMER-1No. 125 A FP MCCB (25 KA), 1No.63ATPNContactor,Auto/ManualSwitch & DigitalTimers for24 Hrs.setting,Metering & Indication-1 set of RYB phase indicating lamps,MFM with Digital Communication Facility along with control SPMCB,BUS-BAR-1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves,OUTGOINGS-4 Nos. 63A TPN MCB,4 Nos. 63A TPN MCB,4 Nos. 25A DP MCB

Supply of following rating MCCB in Sheet Steel Enclosure with extended cable end box for Incoming Cable.125A FP MCCB ,25 kA breaking capacity

Supply of following rating MCCB in Sheet Steel Enclosure with extended cable end box for Incoming Cable.63A FP MCB+RCCB 300mA

Supply of following rating MCCB in Sheet Steel Enclosure with extended cable end box for Incoming Cable.40A FP MCB 10kA

Supply of recess mounting 30 W LED back-lit 2’x2’ with high efficient LED’s, CCT 5700 - 6500 K,CRI≥80, System lumen 120lm/W, Lumens ≥ 3600, white powder coated CRCA with PMMA opal diffuser for glare free & uniform lighting, minimum burning hour life >50000 hours. Driver shall be of constant current type, operating temperature from - 10 to +45 degree celcius, power factor>0.95, rated voltage 220-240 VAC working range:-140 270 V A'c , 50 Hz +_ 5%, AC supply. Surge protection - Inbuilt 2.5KV. Complete in all respect with the entire satisfaction of Engineer-in-Charge.

Supply of 32W LED recessed clean room luminaire CRCA housing with single piece CRCA frame Lumen Pack : 3200Lm, System Power : 33W, Life : L70 , 50K Hrs, IP 65 with Toughened Glass, IP 54 with Clear Acrylic Suitable for front Opening Application. AC working range:- 140-270 V A'c , 50 Hz +_ 5%, AC supply. Surge protection - Inbuilt 2.5KV. Complete in all respect with the entire satisfaction of Engineer-in-Charge

Supply of LED exit signage of Box size in mm 325 x 425 x 365

Supply of recess mounting 36 W LED back-lit 1’x4’ with high efficient LED’s, CCT 5700 - 6500 K,CRI≥80, System lumen 100lm/W, Lumens ≥ 3600, white powder coated CRCA with PMMA opal diffuser for glare free & uniform lighting, minimum burning hour life >50000 hours. Driver shall be of constant current type, operating temperature from - 10 to +45 degree celcius, power factor>0.95, rated voltage 220-240 VAC working range:-140 270 V A'c , 50 Hz +_ 5%, AC supply. Surge protection - Inbuilt 2.5KV. Complete in all respect with the entire satisfaction of Engineer-in-Charge.

SITC of Foot Lamps

SITC of Geysers

Supply & Installation of 3.0 Kva Invertor, 1Phase input & 1 Phase output with 90 minutes battery back up time SMF batteries with overload, short circuit protection.

Supply, Installation, Testing and commissioning of Addressible fire alarm panel. 2 loop + 1 Spare Fire Alarm Panel.The panel should consist of 80-character LCD display with Numaric Key Pad, battery supervision, flash emprommemory single walk test, 4 Operator access levels, 800 event historical log, zone / point. .Panel Should accepted external relay output for integration with other system like PA, Access control, BMS, Talk Back System etc. Panel should be able to record events history. The FACP shall also be provided with a dedicated standby power supply system (battery and charger).(With graphic software package.) Automatic detector sensitivity testing (NFPA-72 compliant).Panel complies with the UL /FM /EN/ VDS Standards and NFPA 72 Fire Alarm Systems requirements.

Supply, Installation, Testing and commissioning of Inteligent Addressible Multisensor detector complete with base for use as heat or smoke or combined both with automatic electronic addressing, microprocessor type and must have integrated short circuit isolator,locking system etc. UL/FM/EN/VDS listed, approved.

Supply, Installation, Testing and commissioning of Heat Detectors with automatic electronic addressing, microprocessor type and must have integrated short circuit isolator ,locking system etc. UL/FM/EN/VDS listed, approved.

Supply, Installation, Testing and commissioning of Smoke Detector combined both with automatic electronic addressing, microprocessor type and must have integrated short circuit isolator ,locking system etc. UL/FM/EN/VDS listed, approved. Above false ceiling Smoke Detector

Supply, Installation, Testing and commissioning of Smoke Detector combined both with automatic electronic addressing, microprocessor type and must have integrated short circuit isolator ,locking system etc. UL/FM/EN/VDS listed, approved.Below false ceiling Smoke Detector

Supply, Installation, Testing and commissioning of Soft Addressable Control Module UL/FM/EN/VDS listed, approved.

Supply, Installation, Testing and commissioning of Soft Addressable Monitor Module UL/FM/EN/VDS listed, approved.

Supply, Installation, Testing and commissioning of Response Indicator with colour LED. UL/FM/EN/VDS listed, approved.

Supply, Installation, Testing and commissioning of Beam Detector . UL/FM/EN/VDS listed, approved.

Supply, laying, testing & commissioning of 2C x 1.5 Sq.mm Cu. Multistrand copper, ZHFRLS Armoured cable. Red in colour, laid on surface with GI saddle every 0.3 mtrs for integration from main panel to Builders panel.

Supply, installation, Testing, & commissioning of the Network controller with digital Integrated System Manager, 8 Zones, with UPS backup, Multi-Functional Integration, with PTT (push to talk) microphone, IEC 60849 certified (Sound systems for emergency purposes)

Supply, installation, Testing, & commissioning of the Message Tone genetaror for pre-recorded message.Shall be an EN54-16 certified user interface.

The Digital 500W Class D, high efficiency 500 Watt Amplifier shall be an EN54-16 certified system device in a 2 RU, 19”cabinet. The amplifier shall be permanently monitored by the system controller. A special standby mode shall be provided for saving energy during the time the amplifier is not is use with respect to all economical and supervision aspects. 4 channel input on RJ45 connector, amp link in and out (4 channel dynamic input channel switching for each amplifier , Amplifier efficiency >= 78%, Limiter prevents audible distortion, Signal to noise ratio, A-weighted: >104 dB

Supply, installation, Testing, & commissioning of Round Speaker ceiling arrange (0.5w-1w-3watts) with multiple taping providing a minimum of 96 db dideliy sound output. The speakers shall be EN Listed.

Supply, installation, Testing, & commissioning of Box Speaker Wall arrange (0.5w-1w-3watts) with multiple taping providing a minimum of 96 db dideliy sound output. The speakers shall be EN Listed.

Supply & installation Suitable Equipment mounting rack, for housing Control Equipment, Amplifiers and Music Source

Supply, laying, testing & commissioning of 2C x 1.5 Sq.mm Cu. Multistrand copper, ZHFRLS Armoured cable. laid on surface with GI saddle every 0.3 mtrs for integration from main panel to Builders panel.

Supply, installation, testing and commissioning of IP Dome Camera(indoor), 0.5 Lux, Day/night, 1/4" or 1/3" interlaced / progressive (CCD /CMOS), Resolustion 1280 x 720 ,4x digital zoom, 0.5 Lux day/night colour, white balance mode, H.264 video compression standards, 25 fps, 12V / 24V AC/DC as per the specifications complete with mounting and all other accessories including Junction Box and Protection Devices complete in all respect. The cost include the cost of power supply as required. (Note:- Camera type will be confirm by client)

Supply, installation, testing and commissioning of Fixed Box Camera (outdoor), 1/4" or 1/3" interlaced / progressive (CCD / CMOS), Resolustion 1280 x 720 , 0.5 Lux color/ 0.5 Lux mono, verifocal lense 5-50-mm 4x digital zoom and H.264 video compression standards, 25 fps frame rate under high motion, operating temperature -10°C to +60°C, 12V/24V AC/DC as per the specifications compelete with mounting and all accessories including Junction Box and Protection Devices complete in all respect. All outdoor devices shall be as per IP 66 protection. The cost include the cost of power supply as required. (Note:- Camera type will be confirm by client)

SITC of 16 Port POE Switch with 1G Fiber Uplink

SITC of 8 Port POE Switch with 1G Fiber Uplink

Supply and installation testing and commissioning of 16 Port Core Switch L3 switch with all accessories in complete.Three hot-swappable fan trays with airflow control provide N+1 cooling redundancy Attain up to 480G stacking bandwidth with four devices functioning together as one/Three Color Marker/Congestion Control1.NVR with 32 Channel with 30 days of Recording 8 fps, 24 hours, 30 days,HDD 6TB surviliance HDD (NON RAID),Client WORK STATION License with PC required as per CCTV OEM requirement,

NVR with 32 Channel with 30 days of Recording 8 fps, 24 hours, 30 days

HDD 6TB surviliance HDD (NON RAID)

Client WORK STATION License with PC required as per CCTV OEM requirement

9 U Rack for Switches & LIU Units

Supply & laying of 6 Core Outdoor OM3 Multimode Fiber Optic armoured Cable with UPVC pipe

Supply & Laying of CAT-6 Cable with PVC conduit

SITC of UL Listed Kitchen Hood fire suppression system which shall include Stainless Steel Wet Chemical Cylinder with Valve duly filled & Pressurized ,Manual Activation Pull Station,Automatic Mechanical Activation Panel,Multiple - Nozzle for Ranges,Multiple - Nozzle for Plenum and Duct,Fusible Links with Brackets,Corner Pulley,Any other accessories required to complete the Integration.Following are the Hood Sizes-The system shall comply with NFPA 96 and NFPA 17A Standards.HOOD- 4650 X 1805 Exhaust Hood, Island Type

R. B. S. Candiaparcar

SHIVAM INFRATECH