Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.7 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING L1 BIDDER | |
| 2 | L2₹7.0 L+₹30,040 (4.45%)Rejected-AOC VILL P O MANKAR DIST BARDHAMAN PIN 713144 | MANKAR | BARDHAMAN | WEST BENGAL | 713144 | L2 | Rejected-AOC NOT ACCEPTED | |
| 3 | L3₹8.2 L+₹1.5 L (22.2%)Rejected-AOC PO BUD BUD DIST BURDWAN WEST BENGAL PIN 713 403 | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L3 | Rejected-AOC NOT ACCEPTED |
Tender Value
₹9.8 L
EMD Value
₹19,620
Closing Date
19 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE PANAGARH
HQ CWE PANAGARH, MES, PO - PANAGARH, DIST - BURDWAN, WB, PIN - 713420
PROVN OF ROAD WITH DRAIN FOR OFFICE SHELTERS FROM MAIN ROAD AT CERTAIN AREA UNDER GE PANAGARH
2022_MES_546520_1
8808/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
PANAGARH
Pl refer Tender Documents
7 documents required · 7 mandatory
₹500
GE PANAGARH
₹19,620
Yes
4 Nov 2022
20 Aug 2022
21 Sept 2022
20 Aug 2022
19 Sept 2022
5 Sept 2022
Amount
Excavating over areas n.exc 1.5 m deep and getting out in Soft/loose soil, complete all as specified and as directed.
Removing excavated material n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.
M&L for Rolling and consolidating formation surfaces in filling by power roller exc 8 tones & n exc 12 tonne capacity to required gradient and camber, complete as specified and as directed by Engr-in-Charge.
M&L for 200mm thick (in 2 layers of 100 mm each) in pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (i.e. 10% fly ash, 30% clinker and 60% stone dust) including watering, ramming and compacted with vibratory/power roller 8 to 12 tonne roller required camber and gradient, complete all as specified and as directed.
M&L for 150mm thick soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed, rolled and consolidated to gradient and camber required, complete all as specified and as directed.
M&L for 150mm thick (compacted thickness) WBM, in two layers of each 75mm thick with coarse aggregates granite/basalt stone of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required, complete all as specified and as directed.
M&L for Preparing surfaces of Unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc., complete all as specified and as directed.
M&L for Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre with paving bitumen, complete all as specified and as directed.
M&L for Premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) laid with mechanical paver, complete all as specified and as directed.
M&L for Bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen, complete all as specified and as directed.
M&L for 75mm thick Moorum/Red bajri spread, rolled and consolidated to gradient and camber required, complete all as specified and as directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block with mixture of grey cement and pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for receiving floor finish, complete all as specified and as directed.
M&L for 50mm thick PCC 1:2:4 type B1 using 20mm stone aggregate as in floor finished even and fair, complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed.
M&L for moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified & as directed.
M&L for PCC 1:3:6, D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified & directed.
M&L for Brickwork built in CM 1:4 with Old size fly ash bricks, straight or curved on plan exc 6m mean radius, complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified & as directed.
M&L for PCC 1:3:6 type C1 using 20 mm graded aggregate as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang, complete all as specified & as directed.
M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars 600mm dia, complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) on wall surface and finishing even and fair, complete all as specified and as directed.
ANIMA ENTERPRISE
ROY ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .