CONSTRUCTION OF PM SHRI SINGLE LAB OF SIZE 7 X 10.60 MTR AT KENDRIYA VIDYALAYA NO 1 ARMAPUR UNDER GE (I) KANPUR

Amount

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose soil complete all as specified and directed.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete all as specified and directed.

Removing excavated material exc. 250m but not exceeding 500m and depositing where directed complete all as specified and directed.

M&L for Cement concrete type B2 (1:2:4) (using 40mm graded stone aggregates) as in surface channels and drains complete all as specified and directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for 150 mm thick Cement concrete (1:4:8) (using 40mm graded stone aggregates) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in flat surface complete all as specified and directed.

M&L RCC Design mix M-25 (using 20mm graded stone aggregate) as in foundation including rafts footings, foundation beams, plinth beams, bases for columns, pillars piers, posts and struts etc complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.

M&L RCC Design, mix M-25 (using 20mm graded stone aggregate) as in columns, pillars piers, posts and struts etc. complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 16.00 above but 6mm to 8mm dia complete all as specified and directed.

All as per item No 16.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Formwork to fair finished concrete surfaces soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc in flat surface complete all as specified and directed.

M&L RCC Design, mix M-25 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks built in CM (1:6) straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for RCC Type B1 1:2:4 (using 20mm graded stone aggregates) as in Chajja complete all as specified and directed.

M&L for 15mm thick in CM (1:4) Rendering on fair faces of brick work or concrete surfaces complete all as specified and directed.

S&F Integral waterproofing compound complete all as specified and directed.

M&L for 5mm thick in CM (1:3) rendering on fair faces of brick work or concrete surfaces on ceiling complete all as specified and directed.

M&L for 15mm thick in CM (1:6) rendering on other than fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of weather proof paint over and including a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered wall and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over and including a coat of wall care putty complete all as specified and directed.

M&l virified ceramic tiles minimum15 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for 100 mm thick PCC type D-2 (1:4:8) (using 40mm graded stone aggregates) as in floors complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick PCC type C-2 (1:3:6) (using 20mm graded stone aggregates) as in Plinth Protection complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over and including 15mm thick screed in CM (1:6) complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified over applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces over and including 15mm thick plastered surface in CM (1:3) using water proofing compound complete all as specified and directed.

S&F pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed.

S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.

S&F 300 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed.

S&F 75mm long aluminum anodised extruded type door stopper of double legged with rubber shoes in bottom complete all as specified and directed.

S&F MS 125mm Butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F 20 mm dia GI pipe medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

S&F 15mm dia GI pipe medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

S&F of 20 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe, complete all as specified and directed.

S&F 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15 mm bore chromium plated Fancy type Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F vitreous china wash basin white flat back of size 550mmx400mm excluding taps,but including waste coupling ,waste pipe,chain and plug and porcelain stopper and brackets etc. complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F for 15mm bore dia of pipe pillar taps cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F for 15mm bore dia of pipe angle cock cast copper alloy, with capstan head chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F 40 mm bore dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 40 mm dia waste pipe of 850mm length for sink/WHB complete all as specified and directed.

S&F chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flange complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F soap dish, vitreous China white, approximate size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M&L for preparation of new surfaces two coats of synthetic enamel paints over and including a coat of red oxide of any description, over 10 cm in width or girth not otherwise described complete all as specified and directed.

Surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed.

M&L for Providing, cement concrete Type B1 1:2:4 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick over and including 15mm thick screed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for Machine cut kota stone as in riser of steps, skirting, dado and pillar mirror finished 18-20 mm thick over and including rendering 10mm thick in CM (1:3) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with out grey cement and no pigment complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volt FRLS grade ISI marked with multistranded copper conductor drawn through PVC conduit ( size not less than 20 mm) medium grade, concealed in wall/ceiling with provision of 1.5 sqmm single core cable green colour PVC insulated copper conductor as earth continuity conductor connected to earth complete all as specified and directed. Note:- One light/ceiling /exhaust fan point controlled by one 05 Amps switch.

All as per item No 72.00 above but for One socket out multi pin 5 Amps controlled by one switch on independant board complete all as specified and directed.

All as per item No 72.00 above but for one socket out multi pin 5 Amps controlled by one switch on same board complete all as specified and directed.

All as per item No 72.00 above but for one socket out 15 Amps with 2.5 Sqmm PVC insulated copper conductor alongwith 2.5 sqmm PVC insulated single core copper cable green in colour as earth continuity conductor complete all as specified and directed.

S&F LED lights fittings 1X20 w, 220 V AC decorative box type with driver, holder including LED tube light connecting up with 3 core flexible coppper conductor cable of suitable size complete all as specified and directed.

S&F Exhaust fan, steel body AC single phase 230 V of size 450mm sweep heavy duty , and frame, louvers complete all as specified and directed.

S&F ceiling fan with blades, down rods,electronic regulator and accessories, 230 V,1200 mm sweep, min air density 210 CFM, Five star rated with brushless DC motor complete all as specified and directed.

S&F LED street light fitting 35 watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant with driver, lamp bracket with impact and corrosion resistant icluding thermal mangement in mulltiple optice complete with IP 54 protection complete all as specified and directed.

S&F sub main wiring for circuit of size 4 sq mm 2 core alongwith earth wire of 4 sqmm single core of FRLS PVC insulated unsheathed cable (FR), 1100 volts grade with multistranded copper conductor, conforming to IS-649, 1100 V grade and drawn through and including PVC non metalic rigid conduit/casing of suitable size and conduit/casing accessories run on surface of wall/ceiling etc and connecting terminal ends of suitable size complete all as specified and directed.

S&F ceiling rose 3 terminal polycarbonate, Isolated body complete all as specified and directed.

S&F modular switch 6 Amp single pole one way, one module complete all as specified and directed.

S&F modular switch one way , flush type 15 Amp 240 volt one module complete all as specified and directed.

S&F modular socket 6 Amp, 2/3 pin combined, 240 Volt 2 module complete all as specified and directed.

S&F modular socket 6/16 Amp, 2/3 pin combined, 240 Volt complete, 2 module complete all as specified and directed.

S& F modular Electronic ceiling fan regulator step type, 120 W , 2 module step type complete all as specified and directed.

S&F modular white cover plate with frame 1 module complete all as specified and directed.

S&F modular white cover plate with frame 3 module complete all as specified and directed.

S&F Modular white cover plate with frame 6 module complete all as specified and directed.

S&F modular metal flush box 1 module complete all as specified and directed.

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular metal flush box 6 module complete all as specified and directed.

S&F MCB SP 6-32 Amps, 10 KA, 'C' Series complete all as specified and directed.

S&F MCB SPN 40 to 63 Amps, 10 KA, 'C' Series, 240V complete all as specified and directed.

Supply and fixing MCB DB double door type single phase with common earth and neutral bus and 200 amps copper bus bars complet , 240 volts, 08 way complete all as specified and directed.

M&L for earthing with GI plate electrodes 600x600x6mm thick buried directly in ground earth pit not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m below ground level connected to G I strip 32x6 mm as earthing lead fixed by means of nut bolt washer of brass as shown in electrical plate No.3 of SSR Pt-I 2009 including necessary excavation and earth work in any strata, GI pipe 20mm dia light grade for watering and 40 mm dia light grade for protection of earth strip charcoal & salt etc and PCC chamber in PCC 1:3:6 type C1 covered with 40mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate reinforced with 8mm dia MS bar @ 75mm C/C both ways cover, funnel & wire mesh including making of test point all as specified testing complete all as specified and directed.

M&L earth continuity conductor or main earthing lead fixed to wall or battens or recess or chases or buried in ground in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of 32X6 mm dia size GI Strip complete all as specified and directed.

Supply & Fixing 25 mm dia GI tubing, medium grade, ISI marked with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc complete all as specified & directed.

S&F of Gun-metal, globe or gate valves, with iron wheel head, screwed down with clutch handle, screwed both ends for iron pipe or unions and fixed suitable of 25 mm dia size complete all as specified and direcied.

Removing excavated surplus soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

M&L for XLPE insulated, sreened, PVC bedded, galvanized steel strip or wire armoured, electric power cable ( heavy duty )1100 Volts grade with stranded aluminium conductor, of size 50 sqmm 3.5 core complete all as specified and directed.

M&L for Sand cushning to U/G cable in layers of 23cm thick (8 cm before laying the cable and 15 cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed. Note:- Punned thickness shall be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

J.B.ENTERPRISES (BID ID -3331272)

M/s raj constructions (BID ID -3332023)

RAFAKAT HUSSAIN GENERAL CONTRACTOR (BID ID -3340053)

Banarsi Lal Ahuja (BID ID -3330394)