REPAIR MAINTENANCE AND CLEANING OF MANHOLES SEPTIC TANKS SOAK WELLS SEWAGE LINES ETC WITH ALLIED WORKS AND CERTAIN MISC REPAIRS TO DRAINS PATHS HARDSTANDING CULVERTS CATTLE TRAP BOUNDARY WALLS FENCING GATES GARBAGE PITS ETC AT ZONE B OF AGE BR I UN

Amount

Dewatering of soak well , septic tanks by using mechanical pump diesel driven with fuel operator and crew of water etc at site complete all as specified and directed. by Engineer in charge.

Cleaning of soak well, septic tank by way of desludging foreign material manually/mechanically and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off outside of MOD premises (at the location notified by the local Municipal Corporation/Cantt board as per rules of public health), including digging required nos of pits for depositing sludge and future capping the pit with the 25 cm thick layer of soil and sprinkling bleaching powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed.

Cleaning of blockage of sewer lines of any sizes/ dia of sewer line (i.e. branch sewer line, main sewer line) by way of cleaning desludging foreign material as well as roding of sewer line between successive manholes manually/mechanically or pumping out sewage from blocked line including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional from Ist manhole upto final drop as septic tank, soakage wellcomplete all as specified and directed.. Note ; For item No- 1 to 3: 1.The cleaning shall be carried out with mechanized operation by means of diesel / electric operated vehicle mounted hydraulic operated high pressure suction -cum -jetting machines fitted with pump of required capacity and the sludge sucked out with Super Succer Machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site land at any distance and without any additional cost. 2. The sludge deposited in sewage line shall be fully cleaned and disposed off the same outside the MOD land at any distance and without any additional cost , on the same day when it was taken out.The job shall be carried out with safety precaution equipment and with strict supervision. 3. During the mechanized operation , the service provider /Contractor shall be equiped with Gas monitor , nylon rope ladder , torch light and compressor blower etc along with the sewage cleaning truck mounted suction / jetting machine . 4. The unit rate quoted by the contractor shall interalia deemed into the cost of providing skilled driver and operator and supervising engineer including provision of water for jetting & removal of sludge /silt /liquid /mud & sand (in foul position )etc. 5. The contractor shall engage the above mentioned T & P and intimate to Enginner - In -Charge in writing with Machine No./ Vehicle No. etc for their record and prior approval . 6. A Register shall be maintained by contractor showing the Machine No /Vehicle No. and their deployment at site mentioning time and date duly sighned by concern JE , Engr -in- charge and contractor and the same register shall be produced while claiming the payment by the tenderer .

Cleaning of all manholes upto 1.5 meter depth of any size and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil and sprinkling powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed.

Cleaning of all manholes upto 3.00 meter depth of any size and removal of sludge/silt/liquid mud sand (in foul conditions) etc, and disposed off out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board) (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25 cm thick layer of soil and sprinkling powder ( including supply of bleaching powder) over the area of ditches with one metre around complete all as specified and directed.

Cleaning of all blockages of Nahni traps/floor traps/bottle traps, blockages of WC's, upto 1st manhole/Gully Trap in shafts, vertical CI soil/waste pipe stacks, CI Tee/door bends etc & cleaning of drain pipes of any dia by rodding and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/Cantt board). complete all as specified and directed. Note :- For item No- 4 to 6 1. To Maintain of internal & external sewage system in functional state at all the time by engaging/deploying minimum One Safaiwala alongwith one Helper from 0900 hours to 1700 hours at Complaint cell of AGE B/R area mentioned in the contract on daily basis, with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), 2. The Nos of person indicated in above items as assumed by the department, shall remain present at the complaint cell of AGE B/R area mentioned in CA. Contractor may have to deploy more manpower in the particular area and deploy adequate sewage cleaning machinary/ equipments to clean the line and open blockages. Rates quoted shall be deemed to have considered in the items all such contingencies. 3. In case of non availability/ absence of any of minimum required man power , the recovery for the same shall be effected @ Rs 500.00 per day for the absence period proportionaly. 4. If necessiated by the Engr-in-charge/GE for work on Sunday/ holidays, the contractor shall provide tradesmen with helpers. 5. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained by contractor and shall be produced for verification at the time of payment of each RAR/Bill.

Taking down cement plaster on brick or concrete surfaces including raking out joints hacking for key and scrubbing down with water etc complete all as specified and as directed.

M & L for brick work with fly ash bricks(modular), straight or curved on plan exc 6 mtr mean radius, old size brick built in cement mortar 1:6and incld dimolition of old brik etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint of approved shade/tint complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer complete all as specified and directed.

M&L for precast manhole cover slabs in RCC 1:2:4, type B-1, using 20 mm graded stone aggregate and set in CM 1:4 and incl complete all as specified and demolition of reinforced cement concrete complete all as specified and directed. by the Engineer-in-Charge. Note: Reinforcement will be measured and paid for seperately)

M&L for Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exc 200 mm thick horizontal or sloping for rough finished surface of flat concrete complete all as specified and directed.

M&L for formwork to edges of concrete flats, roofs and sides of RCC/ PCC bands in walls, and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L for RCC 1:1.5:3 (nominal mix using 20 mm graded ston aggregate as in slabs supported on walls, roof beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like and demolition of reinforced cement concrete complete all as specified and directed.

S&F (TMT bars) 10mm dia and over cut to length, bent to shape required, including cranking and bending spirally for hooping for coloumns, hooking ends and binding with and including M.S wire not less than 0.9mm dia all as specified and directed.

M & L for TMT bars 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..

S&F for SGSW pipe of 150mm bore including jointing with cement joints with PCC bed and haunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore SGSW pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 1.5m, including taking up broken sewage pipe line , complete all as specified and directed.

S&F UPVC underground drainage pipe (UDS) type'B' 160mm dia with wall thickness 4mm (min) and pressure 4KN/m2 jointed in cement solvent complete including testing and concrete bed to drain pipe including padding under haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C-2 complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe of 100/150 mm bore and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

Excavation in trenches (soft/loose soil) not exc 1.5 m wide and not exc 1.5 m depth for foundation for mainholes, shafts etc 2. exc 10 sqm on plan area and n.exc 1.5 m in depth and getting out etc complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&L for PCC 1:4:8 typeD-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor incl demolition of concrete. complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 in Surface channel or drains including necessary form works , stops ,moulds etc incl demolition of concrete.complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping and benching of drain, side packing of path etc. incl demolition of concrete complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including necessary forms mould mitred /stopped ends etc complete all as specified and directed.

M&L for Providing perforated precast reinforced cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregat) drain covere factory made as per specification of manufacturer and set in cm 1:6 mortar in manhole cover,drain cover etc complete all all as specified and directed.

M&L for joint less non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, laid over 15mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all and incl Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L,for glazed ceramic coloured tiles (joint free) of size 450X 350X 7mm/300x600x7mm thick over 10mm thick plaster in CM 1:3 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and drected.

S&F for vitrifield ceramic tiles dark/light shade 10mm thick (Square/rectangular) polished area of each tile not exc 0.36 Sqm in floor etc laid over 15mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in white/coloured cement to match and incl Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

S&F of vitrifield ceramic tiles dark/ light shade 10mm thick (Square/rectangular) polished area of each tile not exc 0.36 Sqmas in skirting etc laid over 10mm thick screed bed in CM (1:3) set and jointed in neat cement slurry and pointed in white/coloured cement to match and incl Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Cutting chases pining in brick,concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth all complete all as specified and directed.

M&L for GI tubing 15mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors and incl taking down GI tubing complete all as specified and directed..

M&L for GI tubing 20mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floorsand incl taking down GI tubing complete all as specified and directed...

S&F in repair coloured/white viterious china WC (ET) wall mounted with E dual flushing cistern incl all necessary fitting such as flush pipe waste pipe fixed as in repair of approvad shade complete all as specified and directed.by engineer-in-charge.

S&F vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete all as specified and as directed.

S&F in repair for Plastic water closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous china half stall urinal white complete all as specified and as directed.

S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S & F, in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S/F in repair cp grating with or witout waste hole size 100 mm fixed with white cement in tiles flooring. complete all as specified and directed.

S&F in repairs shower health faucet to EWC ,CP brass with minimum 900mm long CP flexible pipe, connection etc., complete all as specified and directed.

S&F in repair CP angle valve 15mm bore fancy type.cast copper alloy screwed down high pressure,crutch or butterfly handle, ,screwed both end for pipe or for unions complete.chromium plated with suitable type complete all as specified and directed.

S&F in repair CP stop valves 15mm dia fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs galvanised 2 strand,steel Brbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails,straining bolts,securing and tying at crossings with and provision of galvanised mild steel wire,staple or steel pins etc, complete all as specified and directed. (Each line wire to measured)

S&F in repairs concertina coil 600mm dia of approved quality fixed with clips or clamps on angles and wall etc complete all as specified and directed.

Supply & Fixing in repairs of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified and directed.

M&L for repairs MS work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riverting etc and similar work confirming to Fe 290Gde E-165 and incl dismantling etc complete all as specified and as directed.

M&L for repairs MS work as in cattle trap, grills,gratings etc.bolting or riverting etc and similar work confirming to Fe 290Gde E-165 and incl dismantling etc complete all as specified and as directed.

S&F in repairs coloured pre-painted GALVALUME aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strngth of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws including necessary washers etc all as per manufactures instruction. complete all as specified & directed.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described with two coat of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonary or concrete surfaces of walls, finished even and smooth without using extra cement incl taking down cement plaster complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat primer of approved shade/tint by using roller only complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying 2-3mm thick wall care putty including two coat of weather exterior emulsion (Apex) by using roller only of approved shade/tint complete all as specified and as directed.

S&F 75mm bore of pipe Cast Iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors and incl taking down existing pipe with all fittings etc complete all as specified and as directed.

S&F 100mm bore of pipe Cast Iron soil, waste and vent pipes in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm bore of pipe Cast Iron soil, waste and vent pipes in any length with or without ears with cement joints, fixed to walls and incl taking down existing pipe with all fittings etc complete all as specified and as directed.

S&F 100mm bore of pipe Cast Iron soil, waste and vent pipes in any length with or without ears with cement joints, fixed to walls and incl taking down existing pipe with all fittings etc complete all as specified and as directed.

S&F of 75mm bore PVC (SWR) pipes, single socked in any length with rubber ring joints fixed to wall including PVC holding clamps and incl taking down existing pipe with all fittings etc complete all as specified and as directed.

S&F of 100mm bore PVC (SWR) pipes, single socked in any length with rubber ring joints fixed to wall including PVC holding clamps and incl taking down existing pipe with all fittings etc complete all as specified and as directed.

S&F of 75mm bore PVC (SWR) pipes, single socked in any length with rubber ring joints laid in trenches or in floors and incl taking down existing pipe with all fittings etc complete all as specified and as directed.

S&F of 100mm bore PVC (SWR) pipes, single socked in any length with rubber ring joints laid in trenches or in floors and incl taking down existing pipe with all fittings etc complete all as specified and as directed.

S&F in repairs 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandcushion complete all as specfied and as directed.

M&L for repairs cheqered rubber mouled cement concrete tiles 30cm x 30cmx 25mm thick with grey cement and pigment, set,jointed and laid over 20mm thich sreed bed in CM 1:6, jointed and pointed in neat cement slurry in floors, and cut and polished complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (40mm graded stone aggr) as in floor laid in alternate panels 100mm thick finished even and smooth without using extra cement complete incl demolition of concret etc complete all as specified and directed.

M&L in repairs Exterior floor tiles of size 400x400/300X300,10 to12 mm thick of approved colour and shade laid over 20mm thick screed bed in C:M 1:6 complete all as specified and as directed.

R K CONTRACTOR AND SUPPLIERS

M/s Sachkhand Traders

M/s Bhadoria Associates

abhinish traders

R B ENTERPRISES

KUMAR ENTERPRISES