Restoration of rain damages to LWSS Kharahan Khad to Jahu Khunni Koferdhar

Providing and fixing double flanged MS/GI piping work (Layout to be approved by the Engineer in charge) for suction and delivery pipes suitable to pump(s) offered and common header as per the R/Main respectively complete with all specials such as bends, tees, reducers. Increasers with companions flanges matching with the relevant specifications of the accessories including rubber/asbestos gasket of minimum 3mm thckness as per IS:2712:1979 and required number of nuts and bolts as per IS:1364:1983, The Pipes fittings and joints shall be as per relevant IS code & to withstand 1.5 times total head. The size of the various components incorporated in the technical specification sheet complete in all respect

Providing complete daynamic balancing and complete alignment of router of electric motor including fitting, erection and commissioning of pump set at site of work for 125 BHP capacity Pump set complete in all respect with in all leads & lifts as per the direction and to the entire satisfaction of engineer in-charge

Providing HTS full threaded tie roads, stud, HTS Bolts, HTS gland nuts L-key bolt for disk plate of required size including greas, gland packing, etc complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing and filling heavy duty transformer oil to electrical starters of 125 HP capacity complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing and fixing aluminium cooling fan for induction motor of 125 BHP capacity complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing gland dori of 12mm size, 10mm size and champion sheet of 4mm size complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing and supplying of rubber electrical safety gloves complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing stain less steel pin & bush with nuts and bolts for coupling RB 178 complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing and fixing MCCB/MCB /Oil circuit breaker of 500 Amps capacity of reputed make such as Kilburn/ L&T/ L&K/MEI/Standard make on in coming feeder for motors offered by the tenderer conforming to BIS 2516-1985 latest with upto date amendments with neutral linked under voltage release complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing laying suitable size of 95mm2 Copper PVC insolated armoured power cable 3 core confirming to BIS 1554 (part-1) 1998 or latest with up to date amendments Polycabe, Siemens, Gloster, Iccc, L&T, Haveles make from meter of HPSEB to OCB and OCB to bus bar switch and starters including all other electrical equipments, accessories such as thimble, flexible pipe, solder, nuts, bolts, cable gland, etc complete in all respect and as per the entire satisfaction of engineer in-charge.

Disassembling of break down, MEI make ATS oil immersed starters, of 125 HP capacity by mean of manually, degreasing, cleaning, brushing of all dirt and rusted part of starter with chemical rust cleaner to make the part smooth and clean of both the starters and reassembling by making all the necessary connections with thimbles, nuts and bolts complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing approved make copper contact point sets male and female including other allied accessories for ATS starters in including necessary screw nuts and bolts complete set complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing and fixing approved make pressure gauge to measure the water pressure complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing grease gun of approved make complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing and fixing electrical over load copper coil 150 HP capacity complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing and fixing ball baring of approved quality such as SKF class- No. 6310 M/C3 to the electrical motor 125 HP capacity complete in all respect and as per the entire satisfaction of engineer in-charge.

Providing and fixing ball baring of approved quality such as SKF class- No. 6312 M/C3 to the electrical motor 125 HP capacity complete in all respect and as per the entire satisfaction of engineer in-charge.

Re-winding of 20HP submersible motor having 2900 RPM confirming to IS-325-1978 with upto date ammendments read with IS 900-1972 suitable for three phase electric supply and complete with replacement of nuts and bolts and to the enitre satisfaction of Engineer-in-charge .

Providing digital over load relay complete set 240 to 415 volt and repair and rewiring of soft starter 150 HP capacity complete in all respect and as per the entire satisfaction of engineer in-charge.

Carriage of submersible motor from site to workshop and back to Site of work including loading, unloading, of pump set at site of work complete in all respect and as per the entire satisfaction of engineer in-charge.