Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC | L1 | Accepted-AOC accept | |
| 2 | L2₹10.5 L+₹39,771 (3.94%)Rejected-AOC | L2 | Rejected-AOC reject |
Tender Value
Refer Docs
EMD Value
₹10,800
Closing Date
29 Aug 2023, 3:00 pmClosed
Executive Officer Ayyampalayam Town Panchayat
Town Panchayat office Ayyampalayam
15th Finance - Tied - 2022-23 - Providing Cover, Fencing Arrangeme15th Finance - Tied - 2022-23 - Providing Cover, Fencing Arrangements, Repair And Maintenance To 12th Ward Kuttikkaradu Existing Open Well And 2nd Ward Attrukku Pogum Pathai Thandikkud
2023_DTP_362479_1
333/2023
Open Tender
Civil Works - Water Works
Works
180 days
Ayyampalayam Town Panchayat
Class II
3 documents required · 3 mandatory
₹7,080
Executive Officer
₹10,800
Yes
Executive Officer Ayyampalayam Town Panchayat
27 Aug 2024
23 Aug 2023
29 Aug 2023
23 Aug 2023
29 Aug 2023
23 Aug 2023
24 Aug 2023
Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.20B).
Plain Cement Concrete 1:4:8 mix (One Part of Cement, Four Part of Fine Aggregate and Eight Part of Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).
Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30. a) For Grade Beam
b) For Coloumn,Sunshade
Plain Cement Concrete 1:2:4 mix (One Part of Cement, Two Part of Fine Aggregate and Four Part of Coarse Aggregate) Using 20mm ISS HBG Metal from approved Quarry including all cost conveyance of materials and labour charges for mixing,laying,finishing and curing etc. complete as per standard specifications and as directed by departmental Officers(TNBP No.28).
Cement concrete 1:1 1/2:3 (One Part of cement, one and half Part of Fine aggregates and Three Part of Coarse aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification( TNBP No:30)
Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30
Supplying, fabricating and fixing in position of mild steel angles,channels,I Sections,Griil Gate and Design Grill, including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials,Conveyence and all labour charges for fixing in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete as per standard specifications
Supplying and Fixing 7.50 x 5cm -10 Gauge Weld mesh Cover including cost of bolts and nuts ,cutting all weld mesh sheets to required size if found necessary during execution etc. complete including cost and conveyance of all materials and all labour charges etc.complete as per Standard specification and as directed by the departmental officers
Pointing in Cement Mortor 1:3 Mix (one Part of Cement and Three Part of Fine aggregates ) including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications
Supplying and Fixing of Fencing arrangements Over Kerb wall Using 32mm dia G.I.Pipe including material cost , cutting ,Grinding,Finishing and Fixing inside the kerb wall and Providing Weld mesh of size 750x500mm of 10 Gauge covered alround Frame of using M.S.Angle of size 25x25x5mm and the weldmesh intermediate stiffners of M.S.Flat size 35x6mm,Cost including material,conveyance,Cutting,welding,finishig,Fixing and One Coat of Red oxide Prmer Etc,Complete complying with std. specifications
Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A
Painting with two coats of Approved colour of best quality synthetic enamel anti Corrosive paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A
Supply and delivery of Open well Submersible motor,Panel board,cables , HDPE,G.I.Pipes,Valves and Specials including cost for materials etc. complete i) Open Well Submesible Pump set of 75Lpm X 100M Head of IS 14220/2002 Without Panel Board
ii) 7.50HP Three Phase star Delta Panel board
6 Sqmm Submersible Cable
90 mm Dia PN 10 HDPE Pipes
80 mm Dia B Class G.I.Pipes
80 mm G.M Non return Valve
80 mm G.M Gate Valve
80 mm G.I. Elbow
80 mm G.I. Coupling
80 mm G.I. H Nipple
80 mm G.I. Union
Labour charges for the Erection of submersible pumpset in borewell/open well including fixing and jointing submesible cable with proper clamps upto the starter to requied depth and also fixing of riser pipes to the requird depth valves erection clamps etc, complete. i)Bore well
B Manikandan (BID ID -828937)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .