53/MID/AN

Design, manufacture, supply installation, testing & Commissioning of gantry with 3 Ton Chain pulley Block with accessories for extraction of Foot valves at LIS Kathar . The job involved laying RCC Concrete blocks 2Nos. of Size (1m x 1m) adjacent to the suction pipes for anchoring of vertical square sections.Laying of one layer of 1:4:8 concrete mass, 4 ft depth, providing and laying of M.S angle 50x50x6mm.Providing and fitting of suitable no of vertical TMT steel members provided all along the blocks and cement concrete properly grouted in the blocks with complete curing. Fabrication of 2 Nos. 10 ft height vertical square section of size (0.25m x 0.25m) out of M.S angles of 50x50x6mm size at the base for erection of the square sections done at site of LIS Erection of the 2 nos. Square sections done by anchoring them in the RCC. The job involves providing and fitting of ISMB 250 of length 22ft and welding it on the top of two square sections by lifting and placing it on sections. Job also involves providing and fitting of 3Ton chain pulley block along with horizontal movement mechanism on the overhead gantry, testing and commissioning. The Job also includes fabrication of working platform [2.5 feet long, 2.5 feet wide] from 40mm dia. M.S Pipe for railing and 40×6mm M.S flat for working platform and MS angle iron 40x40x6mm & M.S channel 75x40mm at site The job include the cost of material, labour charges for fabrication of overhead gantry and welding set & Oxy-acetylene gas equipments, transportation charges, skilled/semiskilled labour charges at the site of installation. Complete Job

Restoration of 200 mm dia foot valve of pumping unit no. 01 & 03 at LIS Kathar . The job involves decoupling the foot valve by cutting/unfastening the nuts and bolts from suction pipe. Extraction of foot valve out of river with help of chain pulley block and manual labour. Thereafter providing/installation of new foot valve of the same size. Lowering the foot valve in the river & coupling with suction pipe by providing new rubber packing sheet, nuts bolts and washers. Checking for leakages. The job also includes cleaning of pipes with emery paper with application of one coat of red oxide primer and two coats of paint on the each pipe along with electro mechanical components at LIS Priming the pump & testing/commissioning on full load. The job includes cost of material, labour, transportation etc as per site conditions of LIS. Complete Job .

Restoration of Reflux valve ( 200 mm) installed at LIS Kathar . The job involves dismantling of the reflux valve by way of unfastening/cutting of the rusted nuts and bolts with the help of allied tools and tackles. Thereafter providing/installation of new reflux valve of the same size. Fitment of reflux valve and fitting of new nuts, bolts and washer . Complete job includes the cost of material, labour charges, transportation charges etc. Complete Job

Electrification of pump room building at L.I.S by way of using standard quality material as per site requirement for lighting circuits, heating circuits and by providing and fitting of light points with LED bulbs–5 No’s., conduit pipes , P.V.C. Copper Cable of suitable sizes, Plastic P.V.C. pipes, wooden boxes/Iron boxes, Bakelite sheets, Switches, Junction boxes, Hooks, Bends, Steel wire, Service lines etc The job also includes Job includes the carriage charges of all the material, hire charges of tools & tackles, skilled & unskilled labour charges, cost of material for complete electrification of pump house at L.I.S. Complete Job

M/S FASTTRACK ENGINEERS

Rishabh Electricals and Mechanical Works