SPECIAL REPAIR TO BLDG. NO 44 AND 45 (EXPLOSIVE STORE) AT 4/3 GR AND SPECIAL REPAIR TO ROOF TREATMENT OF CENTRAL LIBRARY BLDG. NO 50 (HRDC) OF AMC C AND C AND CERTAIN OTHER SANCTION WORKS UNDER GE (EAST) LUCKNOW

Amount

Taking down cement plaster on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc but lime plaster any description complete all as specified and directed

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed

M&L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size fly ash bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on other than fair faces of brick work in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering on brick work in CM 1:4 with water proofing compound finished even and smooth complete all as specified and directed. (Note:- WPC shall be measured & paid separately as 'Supply Only').

Supply only integral water proofing coumpound complete all as specified and directed

M&L for rendering 10mm thick on concrete surfaces of ceiling in CM 1:4 complete all as specified and directed

M&L for applying two coats of oil bound distemper over a coat of primer over Birla white wall putty of average thickness 1mm after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed

M&L for one coat of white wash on old plastered wall surface including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of new plastered surface of walls by washing rubbing and applying two coat of cement based paint over a coat of white cement primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed

M&L for preparation of old plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

Dismantling floor, hearth wall tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc laid over and including15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 600X300/450X 350X 7-8mm thick over and including10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for 18-20 mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

Demolition of cement concrete in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover in drain, manhole cover, plateform etc all as specified and directed.

M&L RCC 1:1½ :3 type A1 using 20mm graded stone agg in RCC lintel, shelves,hold faste etc. including necessary form work complete all as specified and directed

M&L for RCC 1:1½ :3 type A1 using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors roofs, landing, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L form work to soffits of suspended slabs such as roof slab landings and similar works not exc 200mm thick (horizontal or slopping) rough finished surfaces of concrete flat complete all as specified and directed.

M&L for RCC 1:1½ :3 type A-1 (using 20 mm graded stone aggregate) as in foundations, footings, plinth beams, bases for columns, etc complete all as specified and directed

M&L for RCC 1:1½ :3 type A-1 (using 20 mm graded stone aggregate) as in Column, pillars, piers, posts and struts etc complete all as specified and directed

M&L for formwork to sides of concrete in foundations, footings, bases of columns, sides and soffits (if any) plinth beams, and similar work complete all as specified and directed

M&L for formwork to sides of concrete of pillars, posts, struts, piers, columns etc complete all as specified and directed

M&L for TMT bars 6 to 8 mm dia for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L for 18-20mm thick granite stone over and including fixed on 15mm thick screed in CM 1:4 including cutting, polishing & rubbring complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in foundation/footing including necessary formwork complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in floor/sub base etc. complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in floors, finished even & smooth using extra cement complete all as specified and directed

M&L for cement concrete 1:5:10 type E-2 using 40 mm graded stone aggregate as in sunken floor, sub base and mass concrete filling, etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified and directed. (Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exc 3 M in length, Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.

S&F mild steel work as in fencing posts including cutting tops to shape as directed , drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc. and similar work complete all as specified and directed.

S&F galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc complete all as specified and directed.

S&F pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling cement concrete type B-1 (1:3:6) filling and compaction in frame complete all as specified and directed.

Taking down chowkats or frames any type (without taking off shutters from the frames) and refixing in same opening including welding/reveting complete all as specified and directed

Taking down chowkats or frames not exc. 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters exc 1 sqm but not exc 2 sqm each and refixing in same opening complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc including necessary formwork complete all as specified and directed

S&F 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed

S&F factory made solid PVC profile panel door shutter 28mm thick (style) with internal skin as frame and 3 mm thick presuure compact laminate on both sides of approved color as infill with C channel type GI or 40x20x19 mm of MS pipe as stiffener and fixing in frame complete all as specified and directed.

S&F PVC door frames (single rebated) of size 60mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer intergral skin with suitable metal CSK screw complete all as specified and directed.

S&F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.

S&F factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F powder coated aluminum ventilator with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings with stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed

S&F 100 mm size butt hinges, medium weight, stainless steel, complete all as specified and directed.

S&F 250 mm long aluminum alloy, anodised sliding door bolts, plate type and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed

S&F in 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed. (Note:- Fixed with screw or welding as required)

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F MS work for chimney bars, bearing bars, window guard bars, plain, let in and fixed independently in wooden frames, and similar articles including making holes in chowkats or welding in iron frame etc guard bars of independent or framed complete all as specified and directed

S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete as specified and directed

S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete without glazing bars dovetailed and welding complete as specified and directed

S&F steel ventilator factory made with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering,cladding to wall etc, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces including preparation of surfaces new wooden surface complete all as specified and directed.

M&L for welding in repair exc 2.5 cm but not exc 5 cm in length thickness of metal to be welded not exc 6 mm complete all as specified and directed.

S&F, 500 Ltr capacity rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed.

S&F in repair 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed.

S&F 20 mm Tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed

S&F 25 mm Tubes medium grade galvanised with all fitting and fixed including taking up or down complete to walls and ceilings or laid in floors complete all as specified and directed

S&F 40 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down complete all as specified and directed

S&F in repair vitreous china wash hand basin white size 550 x 400mm including brackets complete all as specified and directed.

S&F in repair of aluminium anodised six peg hanger of extruded section & fixed in positions of size 300 mm long as approved by GE complete all as specified and directed.

S&F in repair 15 mm bore dia of pipe pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed

S&F in repair PVC connections 15 mm bore with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair PVC connection 15mm bore with PTMT nuts and washer 600mm long with brass/PVC coupling and washer complete all as specified and directed.

S&F in repair 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end complete all as specified and directed.

S&F in repair 32 mm bore Low density PVC flexible pipe for wash hand basin/sink etc complete all as specified and directed.

S&F 32 mm bore Low density polyethylene pipes for urinal etc complete all as specified and directed.

S&F in repair vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement, fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F in repair vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and directed

S&F in repair vitreous china wash down water closet pan pedestal pattern, including P/S trap and connection to drain (or outgoing pipe), seat cover excluding flushing cistern and flush pipe complete all as specified and directed

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed.

S&F in repair 15mm bore Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore long body bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle complete all as specified and directed

S&F in repair 15 mm bore stop valves (angle type) cast copper alloy chrominum plated fancy type screwed down high pressure with crutch or but terfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 25mm ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair for 20 mm brass gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grat-ing including jointing with solvent cement complete all as specified and directed.

S&F in repair CP grating doom 100 mm dia chromium plated complete all as specified and directed.

M&L in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed in wall complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed in wall complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair drapery rods, coloured, standrad quality, PVC coated not less than 25mm dia with heads at both ends and middle support/brackets, rings etc. complete all as specified and directed.

Providing and fixing anodised aluminium fully glazed sliding door shutters using 1.5mm thick standard door aluminium section having size of styles,top rail 83x44mm, where as bottem rail will be made of 110x44mm including necessary jointing cleats, glazing clip, rubber packing, aluminium snap beeding, screw etc anodised aluminium fittings such as 150mm long 3 No aluminium butt hinges B-21 type and 1 No aluminium tower bolt 200mm long (vertical type ) for each shutter and glazing with 4mm thick plain glass of any approved shade complete all as specified and directed.

S&F anodised aluminium frame of section 100x44x1.50mm thick fixed with rawal plugs and screw or wire expansion hold fasteners complete all as specified and directed.

M&L MS framed work as in doors or gates of angle iron or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors etc. tobe prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel, sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290(Gde- E-165) complete all as specified and directed.

M&L for steel work as in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-11979 Gde St 270 complete all as specified and directed.

S&F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F MS screw bolts 12mm dia (Machine Made ) with hexagonal or square heads at one end and screwed at the other end or screwed both ends,each screwed end to be fitted with washers and one end hexagonal or square nut, diameter of shank 11 to 15 mm, length of bolt not exc 5 cm long complete all as specified and directed.

Supply only glass dividing strips, 3mm thick and 38 mm wide complete all as specified and directed

Excavating in post holes (or similar holes) in soft/loose soil, each not exc 0.5 Cum (0.55mX0.55mX1.5m deep), getting out, and removing soil to a distance n exc 50m complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep in soft/ loose soil complete all as specified and directed.

M&L for hard core using broken bricks of gauge not exc 63mm deposited spread & levelled in layers not exc 15cm watered and rammed to a true surface thickness complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed

M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor of shed etc complete all as specified and directed.

S&F 80 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-35 grade of approved shade laid over and including 50mm thick sand cushion and filled with fine sand complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying two coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surface of ceiling, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying two coat of white wash on ceiling mixed with adequate qty of fevicol complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying two coat of cement base paint on walls tinted or white including complete all as specified and directed

M&L for preparation of old decorated plastered surface of walls, and applying one coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed

M&L for complete removal of existing treatment on old plastered surface including necessary preparation, and applying two coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted on steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Dismantling of existing roof treatment with tiles etc any description and any thickness upto PCC padding complete including removal of debris away from the site complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in padding, slope correction, roof kebs or mud stops, rounded or chamfered on edges for exposed to weather and cleaning by wire brushes etc complete all as specified and directed

M&L for water proofing treatment with polymeric water proofing membrance as under including taking down:- (a) M&L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumen primer @ 0.50 Itrs/Sqm and allow to dry. (c ) Applying one coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm. (d) Applying and laying polymeric water proofing membrane weight not less than 3kg/Sqm. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20kg/sqm including blinding with course sand dry if required complete all as specified and directed.

M&L for applying two coat of bituminous aluminum paint over APP membrane provided on roof complete all as specified and directed.

M&L for 40mm thick brick tiles grounted with CM 1:3 over and including 15mm thick screed bed in CM 1:4 using course sand including WPC@3% by weight of cement complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.

M&L for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 134 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.

All as per serial item No 134 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.

All as per serial Item No 134 here-in-before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sqmm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board.

S&F switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

S&F socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

S&F switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

S&F electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

S&F in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed. Make : Crompton, Cat No : LBHE-10-CDL or Havells, Cat No : RUGBYNEONFT10WLED760SSYMBOPC or PHILIPS Cat no WT202WLED6SCWPSUS2PC

S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC or Philips cat no TMC 501P1XT-LED22W P 3241

S&F in replacement of single side connection LED T8 tube light rod 8 Watt, 6500K of two feet long into and including LED tube light fixture of two feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.Make : Crompton, Cat No : DMLN1LT8-8& LT8-8-865-2 or equivalent in havells / Philips

S&F in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Crompton, Cat No : LSTP-45-CDL or equivalent in Havells/ Philips

S&F ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard-II and refixing with three core copper wire and all connected items complete all as specified & directed.

Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

S&F in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

S&F in replacement of sheeet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volts, 04 ways with 200 Amp rated copper bus bar and metal door with IP-43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.

S&F in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.

S&F in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

S&F in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

S&F exhaust fans, plastic body, AC, single phase, 230/240 v of size 200 mm sweep with louver and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed

Cutting walls any type, making holes for fixing of exhaust fan of any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed

S&F LED bulb 9/10 Watts suitable for B22 white in colour complete all as specified and directed. Make:- Havells/ Crompton/Bajaj

S&F Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed.

S&F aluminium strip 25 mm X 3.15 mm complete with saddles and fixing screws for roof conductors and down conductors above ground complete all as specified and directed.

S & F coppper test point terminal block made of gunmetal or phospohorus bronze size 75 x75x 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screws complete all as specified and directed.

S&F 10 SQMM 2 Core Aluminium unarmoured, flame resistant PVC flat cable, ISI marked complete all as specified and directed.