8652 SPECIAL REPAIR TO DRAIN AND SECURITY FENCE AT 4 RMC UNDER AGE BR II OF GE SOUTH PUNE

Amount

Excavation in soft disintegrated rock for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, manholes etc and getting out in in soft / disintegrated rocks, complete all as specified and directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) not exceeding 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified and directed.

S & F of mild steel screw bolt dia of shank 11 to 15 mm (machine made) exc. 5 but n. exc. 10 cm in length, with haxagonal or square head at one end and screwed the other or screwed both ends, each screw end to be fitted with washer & nuts etc. complete all as specified and directed.

Supply only chain link MS galvanized fencing of 100x100 mm mesh (4 mm) size including line wire, any type of strands, rails and straining bolts etc including provision of binding wire etc. complete all as specified and directed

Fixing only chain link fencing of 100x100 mm mesh (4 mm) size including line wires, any mesh, size and type to any type of standards, rails, straining bolts, binding wire etc., complete all as specified and directed.

M&L for round bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for chain link fencing and binding with and including MS Wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as specified and directed

S&F GI two strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs @ 75mm spacing and straining and fixing to any type of standard rail, straining bolts, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins etc. (each line wire to be measured) complete all as specified and directed.

M & L for mild steel framed work of any sections as required at site as in doors or gates of angle or other section with gusset plates, rails braces etc. complete drilled for fixing of steel sheeting or other covering to be prepared for hanging, or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) running rails and guides and hanging also fastening and fixing, fortified designed gate, complete conforming to FE-410 W (GDE-E-250) Quality-A design of gate complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundation plinth courses or parapets, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation concrete for fencing posts, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan exc. 6.0 m mean radius with modular bricks in CM 1:6 complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, including dismantling of old existing PCC block masonry including removal of dismantled materials to a distance n. exc. 50 m complete all as specified and directed.

M & L 15mm thick rendering in cement mortar 1:4 on fair faces concrete surfaces or block walling / brick masonry work, finish the surfaces even and smooth with out using extra cement complete all as specified and as directed.

M&L for applying two coats cement base paint (snowcem) over a coat of primer on new walls surfaces, including preparation of surface of walls, complete all as specified and directed.

M&L for 450mm bore reinforced concrete pipes, class NP-2, laid in trenches and jointed complete with collars including dismantling of old existing unserviceable drain pipe of any type, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2 as in bed to drain pipes including packing under, and haunching against the side of pipes after they are laid and tested in 450mm bore of pipe including demolition of old existing PCC bed of any type, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (Using 40mm size graded stone aggregates) as in surface channels and drains etc. including demolition of old existing PCC and removal of demolished materials to a distance n. exc. 50 m complete all as specified and directed

M&L for form work to flat foundation, footings, bases of column, parapets, side & soffits of foundation and similar work, fair finished surface of concrete, complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, rubber moulded/ glossy finish, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of crushed sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demolition of old existing unserviceable tiles of any type complete all as specified and directed.

Cleaning of existing drain (dry or liquid mud) of any size and depth and removing the excavated materials from site to a distance exceeding 500 m from the starting point and deposited where directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 40 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring, well compacted, finish surfaces even including demolition of existing PCC of any type and removing debries from site, complete all as specified and as directed.

Supply & Fixing angle iron work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-410 or Fe 310-0 any size complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description not exceeding 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

PRASHANT CONSTRUCTION (BID ID -3252427)

SARATH ENTERPRISES (BID ID -3245661)

M/s.BAJRANG CONSTRUCTION (BID ID -3244145)

Gauri Associates (BID ID -3246540)

M/S BRJ & SONS (BID ID -3243489)

L.T Associate (BID ID -3246230)

Raj Construction Company (BID ID -3252897)

PAL CONSTRUCTION (BID ID -3252550)

ANIL CONSTRUCTION CO. (BID ID -3241122)