PROVN OF CENTRAL BATHROOM, SHED FACILTIES AND 03 x STORE ROOM FOR NEW ACCN AT SIGNALS RECORDS UNDER AGE B/R-I OF GE (EAST) JABALPUR

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil including removal of surplus soil n.exc 50m complete all as specified and directed.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr depth, for foundation etc n.exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified & directed.

M&L for excavation in trenches for laying of cables , poles and stay in any type of soil n.exc 1.5 mtr wide and n.exc 1.50 mtr deep and getting out in soft/loose soil complete all as specified ad dirtected.

M&L for excavation in trenches n.exc 1.5 mtr wide and exc 1.5 mtr but n.exc 3.00 mtr in depth, for foundation of poles/Stays etc and and getting out in soft/loose soil complete all as specified ad dirtected.

Returning, filling in, including spreading levelling watering and well ramming in layers n.exc 25cm as in soil complete all as specified and directed.

M&L for 30mm thick crushed stone sand/ river sand as in cushening layer below interlocking paver tiles well compacted to a true surface.

M&L for unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Maesurement shall be done after puning down of sand.

M&L for PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in filling in surface channels and drains etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping of pole ect including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point with soil complete all as specified and directed.

M&L for anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter incl drilling and plugging holes etc.in apron complete all as specified.

M&L anti-termite Treatment of soil inder floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with CM 1:2 to match the floors complete all as specified.

M&L cement concrete (1:4:8) type D-2 (40 mm graded crushed stone aggregate) as in sub base, Mass Concrete complete all as specified and directed.

M&L providing cement concrete 75 mm thick 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base of flooring.

M&L Stone kerb of machine pressed coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cm x 30cm x 15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:4 struck finished, applying two coats of paints in zebra pattern as directed by Engr-in-Charge.

M&L PCC (1:3:6) Type C1 using 20mm graded crushed stone aggregate as in Coping, bed block for hold fast complete all as specified and directed.

M&L RCC M-25 (Design Mix) (20 mm graded crushed stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc complete all as specified and directed.

M&L RCC M-25 (20 mm graded crushed stone aggregate) as in slabs suppoorted on walls, beams and column in floors, roof, landings, balconies, canopies, deck slab and in shevels the like complete all as specified and directed.

M&L RCC M-25 (Design Mix) (20 mm graded crushed stone aggregate) as in beams, chajja etc complete all as specified and directed.

M&L RCC M-25 (Design Mix) (20 mm graded crushed stone aggregate) as in column complete all as specified and directed.

Supply only integral water proofing compound complete all as specified (ISI Mark).

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished concrete surfaces.

Form work to sofits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete completed all as specified and directed.

Form work to sides and sofits of floor or roof beams, beam haunching, bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc rough finished surfaces of concrete completed all as specified and directed.

Form work to sides of pillars, piers, columns, square, rectangular, polygonal, circular on plan rough finished surfaces of concrete completed all as specified and directed.

S&F 2nd class hard wood plain, solid, straight and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including back side painted with black japan, complete all as specified and directed.

M&L 35mm thick (2nd class hardwood) (Factory made ) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L 35 mm thick 2nd class Hard wood (Factory Made) Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet site as per specification & drawing.

S&F factory made soild PVC door frame of size 50mmx47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES Schedule Part-II (2010) complete all as specified and directed.

S & F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30 mm thick ( stiles ), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specifications and drawings. beading, and joined together with solvent cement, suppling & fixing in the frame.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed of size 150mm long complete all as specified and directed.

S&F 300mm long aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100mm long Butt hinges MS cold rolled (medium wight) complete all as specified and directed.

S&F 300 mm long , ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and directed.

S&F aluminium anodised handle fabricated type of size 150 mm complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L Mild steel work framed such as grills,gratings etc. with ends of bars souldered or or rivetted or forged into spikes,framed guard bars,frame works of water tanks and similar work complete all as specified and directed conforming to Fe-250 Gde-165.

S&F MS TMT bars10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed confirming to Fe 500 or Fe 550.

All as per srl item No 40 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups spacers and binder.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 -W (Gde- E- 250) quality- A

S&F factory made steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed.

All as per srl item No 43 here-in-before above but without glazing bars.

S/F steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.

M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm compressing of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. Make : Armstrong/Ramco

S & F mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A.

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

Supplying and providing water proofing treatment over cleaned roof/chajja/vertical surface with 3mm thick polymeric standard water proofing APP membrane wt not less than 3 kg/m2 comprising of the following for approachable/Non approachable roof including cleaning, sweeping and washing with water to remove all dust etc from the plastered roof surfece or walls applying a coat of hot air blown bitumen of grade 82/25 confirming to IS 702 @ 1.20 kg/m2 over a coat of bitumen primer @ 0.3 kg /m2 on prepared surface weight of APP membrane not less than 3 kg/m2 with 100 mm over laps with sides and end . the over lap shall be sealed flame including with vertical surface after cutting necessary grooves and making good with PCC gala 1:2:4 type B1 etc adhere to hot blown bitumen all as per manufacturere instruction (i) over membrane applying a coat of hot applying bitumen of grade 85/25 confirming to ISD 702 @ 0.75 Kg/sqm binding material such as dry condition minimum shall be dusted over bitumen including cement slurry 3Kg/Sqm, including two coat of aluminium paint complete all as specified and directed.

M&L machine cut kota stone slab flooring of size 600mm x 450mm x 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing including 15mm thick Screed bed or bedding layer of mortar in CM (1:6) complete all as specified and directed.

M&L machine cut kota stone slab as in vertical surfaces , skirting ,dado 10-15 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) complete all as specified and directed.

M&L 100mm thick PCC (1:4:8) type D-2 (40 mm graded crushed stone aggregate) as in sub base, finished even and fair complete all as specified and directed.

M&L 40mm thick cement concrete type B-1(1:2:4) (20 mm graded crushed stone aggregate) as in floor finished even and rough complete all as specified and directed.

M&L glazed ceramic coloured & digital tiles 350 x 250 x 7/450x350/7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed.

M&L non skid ceramic coloured & designer tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.11 sqm but nexc 0.18 sqm,in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match.

M&L Machine pressed rubber moulded precast coloured concrete interlocking paver block any shape and size of 60 mm thickness with grey cement and pigment complete all specified and directed.

M&L 10mm thick rendring in CM (1:4) over roof surface surface even and smooth mixed with WPC @ 3% by weight of cement complete all as specified and directed. Note : WPC shall be measured & paid separately as supply only).

M&L 15mm thick Renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4) finished surfaces even and smooth without using extra cement complete all as specified and directed.

All as per srl item No 61 here-in-before but 05 mm thick in CM (1:3) on ceiling complete all as specified and directed.

M&L 3mm thick wallcare putty on walls complete.

M&L for preparation of new plastered surfaces and and applying two coats of cement base paint over a coat of white cement primer on walls complete all as specified and directed.

M&L for three coats of white wash (lime) on newly plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed.

M&L for three coats of white wash (lime) on newly plastered surfaces on ceiling including preparation of new plastered surfaces complete all as specified and directed.

M&L Sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane 3 mm thick complete all as specified and directed.

M&L 3 mm thick Figured glass, pin headed type and glazing with oil putty in square but n exc. 0.5 sqm in each pane complete all as specified.

M&L two coats of synthetic enamel paint over new prepared steel surface over a coat red oxide primer over 10 cm width or girth complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.

M&L for crossing hole under road/hard stranding for passing cable through GI pipe including GI pipe light grade 50 mm dia with all fittings.

All as per srl item No 71 here-in-before but size 80 mm dia complete all as directed.

All as per srl item No 71 here-in-beforebut size 100 mm dia complete all as directed.

S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed

All as per srl item No 74 here-in-before but 20mm bore complete all as specified and directed

M&L moorum/red bajri filling in floors or pavings laid in layers nexc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

S&F 2000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vetical with threaded closed top) hoisted and fixed in position all as specified in SSR Part-I. Note : PVC tank shall be ISI marked and having three layers, white colour.

S&F in repairs 15mm dia bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F 15 mm dia stop valves/angle cock, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm long.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 75 mm dia PVC (SWR) bends any radius.

S&F 110 mm dia PVC (SWR) bends any radius.

M&L PVC (SWR) "P" trap 125/110 mm, setting and jointing with solvent cement.

PVC (SWR) floor trap75mm, with grating including jointing with solvent cement.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement.

S& F in repair Vitreous china squatting pan, 'Orissa pattern’, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete and making good to floor complete all as specified and directed.

S & F 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, pull or push type including brackets complete all as specified and directed.

S&F brass chromium plated overhead shower with arm and flange complete in repairs. Make Prayag Cat No BS-76 or equivalent

Supplying and laying unreinforced precast cement concrete cable covers, Class LV, Type - 1 Flat, size 250mm x 150mm x 40 mm in trenches for cable protection, embossed with "LT 1100 Volts Electric" on the top surface complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty pvc concealed conduit of white/ivory colour including all accessories after chasing in wall/ceilling etc, and for one light /fan point controlled by one switch including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in & inclusive of MS sunken box 1.2mm thick (flush metal box) for mounting of fittings like switch, socket , fan regulator etc complete with 3mm thick laminated switch board cover all as specified and as directed.

All as per srl item No 92 here-in-before but for One ceiling/wall mounted fan point controlled by one switch complete all as specified by the Engineer-in-Charge.

All as per srl item No 92 here-in-before but for One exhust fan point controlled by one switch complete all as specified by the Engineer-in-Charge.

All as per srl item No 92 here-in-before but for One 3 Pin, 5/6 amps socket outlet point ,on the same board with with 1.5 Sqmm cable size etc complete all as specified and as directed.

All as per srl item No 92 here-in-before but for One 3 Pin, 5/6 amps socket outlet point , independent board with 1.5 Sqmm cable size etc complete all as specified and as directed.

All as per srl item No 92 here-in-before in before but 2.5 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

All as per srl item No 92 here-in-before but 4.00 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 4.00 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

S&F new 1 x 20W LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1 x 20 Watt LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed.

S&F 1 x 10W LED bulk head luminaries, with lamp holders, etc. complete with all accessories,1 x 10 watt LED lamp and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ compete all as specified and directed. Make :Bajaj/Havells/Surya.

S & F new 1 X 10 W LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1 x10W LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for battan fittings, complete all as specified & directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S&F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed.

S&F 5 pin socket outlet, 5/6 Amps / 3 pin 5/6 Amps, flush type, ISI marked, complete all as specified and directed.

S&F Switch Socket combination 2 in 1, 5 and 15Amps, flush type, ISI marked complete all as specified and directed.

S&F Switch Socket combination 2 in 1, 5 Amps, flush type, ISI marked complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one double pole MCB 20A, 10 KA 240 volt complete all as specified and as directed.

S&F for sheet metal enclosure MCB DB SPN 8 Way vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F for sheet metal enclosure MCB DB TPN 4 Way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65 x 20mm, 3 terminals, complete all as specified & directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI earth wire of size 4.0 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade pipe for protection of GI wire to the extent of 7.5 mtrs as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate Z No 3 of SSR par - I (2009) including PCC foundation/chamber in mix 1:2:4 type B1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground and laid down through 20 mm PVC medium grade conduit complete with fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire etc completer all as specified and directed by Engr-in-Charge.

S&F ceiling fan, 230 volts, 1200 mm sweep with service value of the fan shall be greated than 6.1 as per BIS with necessary aceessories and electrical connections for ceiling rose to fan terminal complete all as specified and directed.

S&F for energy efficient exhaust fan of 300 mm sweep made of metal body ventil Air - DS type complete with louver with bolts nuts and washers size lt 15 cm 12 mm dia embedded in the wall including provision of PVC flexible coppler cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connecttion and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.

M&L sub main wiring (concealed type) in and including PVC Rigid Conduit of 32mm dia with two single core FRLSH PVC insulated unsheathed cable, 1100 volts, grade having stranded copper conductor of 06 sqmm nominal cross sectional area each drawn into and all accessories including one single core 6.00 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified and as directed. Note : Two run single core cable, one run of earth conductor and one run of PVC conduit shall be measured as a unit length.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

S&F MCB triple Pole and neutral rated capacity 63 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole and neutral rated capacity 40 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole rated capacity 5 to 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F wall mounted fan embedded in the wall including provision of PVC flexible coppler cable of size 23/0.0076 two core connecttion and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.

S & F for highly efficient LED bulbs, 10 watt used as a ready replacement for existing GL/CFL/direct fit lamp, in B-22 capacity complete all as specified and directed.

Supply, fixing and testing of Steel tubular sewaged pole complete with cast iron base plate, finial taper plug, bolts nuts & screws as specified type 410 SP-22 (08.50 mtr long pole) etc including one coat primer & two coats of aluminium paint etc complete all as specified & directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc.15 cm thickness (below or above ground level) complete all as specified and directed.

S&F XLPE insulated armoured and pvc sheated heavy duty electric cable with aluminium conductor 1100 volt grade laid in tranches passing through pipes /ducts including testing complete of following cross sectional area and size. Note- rate is inclusive of cable gland & cable lugs.

2 core x 10 Sqmm

4 core x 10 Sqmm

3.5 core x 35 Sqmm

3.5 core x 50 Sqmm

S&F junction box for street lights of size 155 x 210 x 92 mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermen proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 65 protection single leaf shutter in front having proper locking arrangements and painted with powder coating paint and suitable size of "connectewell" stud terminal (provision for socket bolting) - 05 Nos suitable for 415 voldts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 6 Amps - 01 No, 4 way, clamp made out of MS flat 30 x 5 mm, nuts, bolts, washers etc complete and mounted on security light pole complete all as specified and directed. Make - Hensel cat Part No - DK 1616G with terminals and equivalent Havells/CG.

Taking down old UNSV street light fitting of any type & size and S&F for Smart Bright LED street light fitting of capacity 45 watts with IP 65/66 protection and pre-wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multistranded from ceiling rose to light fittingcomplete all as specified and directed by Engr-in-Charge. Make : Philips cat part No BRP 052 LED 45 CW SLMR FG S1 PSU GR or equeivalent to Havells/Bajaj

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level connecting to and including GI steel strip of size 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 40 mm dia medium grade pipe for protection of GI strip to the extent of 7.5 mtrs as earthing lead including charcoal dust and salt packed all around the earth plate in the earth pit all as per Electrical plate ZNo 3 of SSR par - I (2009) including PCC foundation/chamber in mix 1:2:4 type B1 with angle iron frame CI frame, CI cover with provision of locking arrangement and 20 mm dia light grade GI pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangement complete including excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- Earth protection pipe & earthing strip upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

Schedule of credit amount of Rs. NIL to be deducted during AOC.

M/S RAJ BUILDERS

M/s Ram Associates

a k builders