PERIODICAL SERVICES OF CERTAIN BLDG OF HEMRL, AREA UNDER GE (I) RnD PASHAN, PUNE

Amount

Material and labour for preparation of old plastered or unplastered surfaces and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

Material and labour for preparation of old plastered or unplastered surfaces and applying two coats of oil bound distemper on wall surfaces complete all as specified and directed.

Material and Labour for complete removal of existing treatment on old plastered wall surfaces and applying two coat of oil bound distemper over a coat of alkali resistant primer including appying 1mm thick wall care putty on wall surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment of any description on concrete, brick, stone, wood, steel surface etc exceeding 10cm in width or grith and applying two coats of fire resistance paint over a coat of primer on wall surfaces complete all as specified and directed.

Material and Labour for preparation of old plastered surfaces of ceiling and applying two coats of oil bound distemper complete all as specified and as directed.

Material and Labour for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc., including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots, crack filling with crack fill paste/order of Asian paints or equivalent make and make good smoothen surfaces by sand paper and appying one coat of acrylic water based exterior grade primer @0.9lit (undiluted)/10 Sqm diluted with water in 1:1/7 ratio to be applied with fully automatic airless spray machine of paint application with aflow speed of 1 litre per minute having a pressure of 3200 PSI and two coats of water based premium acrylic platina long life 10 exterior emulsion (Berger Paint) or equivalent make of approved color with silicon additive & colour stay technology, exellent dirt pick up resistance with low VOC less than 50 grams/litre as per the LEEDS specifications, anti Algae properties in two coats @ 1.79 litre(undiluted)/10 Sqm diluted with water all as per manufactureres instructions applied over priming coat with fully automatic airless spray machine of paint application with aflow speed of 1 litre per minute having a pressure of 3200 allow 6-8 hours to dry the surfaces in subsequent coats of paint and including necessary scaffolding at any height complete all as specified and as directed. Notes for smart periodicals (a) Work shall be done as per MoU between tenderer and manufacturer of paints and their authorized applicator complete all as specified and directed (b) The contractor shall submit MoU between tenderer and manufacturer of paints and their authorized applicator before commencement of work. (c) Cost of scaffolding at any height shall be included in the quoted rate. (d) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, fascias, parapets etc shall be done by using mechanial sander with internal dust extraction system for clean environment certified by the manufacturer. After the prepartion of surface written approval shall be obtained from GE before applying primer and further treatment/ coats. Bldg wise stage passing register shall be maintained. (e) Finishes ie cement based paint, acrylic water based exterior grade primer,premium acrylic smooth exterior emulsion etc to walls, ceiling, chajjas, fins, fascias, prapets etc shall be applied using airlessspray technology and capable of operating single spray gun with a suitable hose length. the spray machine should be of reputed manufacturer with pro-guard technology and capability of tracking pressure as well as paint and primer usage (f) This equipment shall be certified by approved manufacturer. (g) The accessories for applying the finishes shall be spray in hard to reach areas and penetration of finishes on the surface so as to achieve uniform application and quality surface finish. (h) The contractor shall submit approved company generated 05 years warranty card at the time of submission final bill.

Taking down cement plaster on brick or stone surfaces or concrete surfaces walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for rendering 15mm thick in two layers with 10mm thick in CM 1:6 on of fair faces of brick masonry or concrete surfaces and 5mm thick in CM 1:4 with integral water proofing compound Note: WPC shall be measured and paid seperately complete all as specified and as directed by Engr-in-charge.

Material and Labour for rendering 5mm thick cement plaster on cement concrete surface as in ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over newly plastered surfaces including preparation of newly plastered surfaces complete all as specified and directed.

Material and Labour for preparation of newly plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistance primer on wall surfaces complete all as specified and directed.

Material and Labour for preparation of newly plastered celing surface and applying two coats of oil bound distemper complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint on old painted surfaces of wood and wood based materials over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Material and labour for roof/floor paint of two coats on concrete/brick/stone surfaces all as per manufacturer instructions after making the surfaces clean from dust/dirt by brooming /washing etc complete all as specified and directed.

Material and Labour for complete removal of existing treatment and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plastered surfaces complete all as specified and directed.

Material and labour for Preparation of old painted surfaces of steel of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed.

Dismantling water tanks exceeding 250 but not exceeding 500 litres complete all as specified and directed.

Supply and fix 500 litres capacity ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR part I complete all as specified and directed.

Dismantling water tanks exceeding 500 but not exceeding 1000 litres complete all as specified and directed.

Supply and fix 1000 litres capacity ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR part I complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, of any dia of pipe in any position on wall or in floor etc complete all as specified and directed.

Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or in floor complete all as specified and directed.

Supply and Fix 110 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fix 15mm bore tube medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Fixiing only steel tubing of 15mm bore any grade with necessary fittings to wall and ceiling or laid in floor complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections including cleaning forr refixing or removal to store complete all as specified and directed.

Supply and fix 20mm bore tube medium grade galvanised with necessary fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

Fixiing only steel tubing of 20mm bore any grade with necessary fittings to wall and ceiling or laid in floor complete all as specified and directed.

Material and labour for Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high using specific brush complete all as specified and directed.

Material and labour for writing stops, commons, short lines, dashes, hyphens, brackets, etc using specific brush complete all as specified and directed.

AJAY ENTERPRISES (BID ID -3315834)

Vipul Enterprises (BID ID -3316250)

S.K.HARAL (BID ID -3316029)

DARSHAN ENTERPRISES (BID ID -3315868)

shakti engineering and electrical works (BID ID -3316195)

M/S NILESH BUILDERS (BID ID -3315829)

sanjay m. suryawanshi (BID ID -3315065)

M/s S.R lahoti (BID ID -3315959)