Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.3 LAccepted-AOC 88 197 B CHAMAN GANJ KANPUR 208001 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208001 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹31.8 L+₹4.3 L (15.8%)Rejected-Finance | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹32.5 L+₹5.0 L (18.3%)Rejected-Finance PLOT NO 74 150 FT ROAD P O NEW P A C GANGA NAGAR MARG SHYAM NAGAR KANPUR 208015 UP | KANPUR | KANPUR | UP | 208015 | L3 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 4 | L4₹34.4 L+₹6.9 L (25.1%)Rejected-Finance 430 D DEFENCE COLONY JAJMAU KANPUR 208010 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208010 | L4 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 5 | L5₹37.0 L+₹9.5 L (34.5%)Rejected-Finance | L5 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
6 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Srinath PL
GE I Kanpur Cariappa Road Cantt Kanpur 208004
PERIODICAL SERVICES AND OTHER B/R WORKS AT VRG LINE, ME LINE, COD ESTATE, SUPPLY DEPOT AND NAPIER ROAD UNDER AGE B/R-I KANPUR CANTT
2022_MES_546990_2
GE(I)/KAN/T-51 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KANPUR
As per tender Documents
7 documents required · 7 mandatory
₹500
GE (I) KANPUR
₹96,000
Yes
28 Oct 2022
23 Sept 2022
8 Oct 2022
23 Sept 2022
6 Oct 2022
26 Sept 2022
Amount
M&L for preparation of old plastered surfaces and applying one coat of white wash as on wall including removing/ brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified.
All as per Item No (01) here-in-before but as on ceiling.
M&L for preparation of old plastered surfaces and applying one coat of colour wash as on wall including removing/ brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified.
M&L for preparation of old plastered surfaces including removing / brooming down or scraping down loose dirt by steel wire brushes etc, applying wall care putty where required for filling purpose of any depression /cavity etc and applying one coat of oil bound distemper of any colour on wall by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. (Note : M&L for protecting/covering door/window etc during spray shall be deemed to be included in this item.)
All as per Item No (04) here-in-before but on any type of surface of ceiling.
All as per item No (04) here-in-before but applying two coats of oil bound distemper.
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of oil bound distmper over a coat of primer of any colour by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working and applying wall care putty for getting smooth surface complete all as specified and directed. (Note : M&L for protecting/covering door/window etc during spray shall be deemed to be included in this item.)
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces using wall care putty where required for filling purpose of any depression /cavity etc and applying two coats of oil bound distemper over a coat of primer of any colour by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working complete all as specified and directed. (Note : M&L for protecting/covering door/window etc during spray shall be deemed to be included in this item.)
M&L for preparation of old plastered surfaces and applying one coat of cement based paint of approved shade on plastered surfaces or unplastered surface of wall including brooming down or scraping down loose dirt by steel wire brushes etc complete all as specified.
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.
M&L for preparation of old plastered surfaces including removing / brooming down or scraping down loose dirt by steel wire brushes etc, applying wall care putty where required for filling purpose of any depression /cavity etc and applying one coat of exterior weather proof anti algae (Product : Asian Paints Apex) 100% acrylic emulsion with maximum working pressure of 3300 PSI by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working,complete all as specified and directed. Make : Asian Paint or equilvalent of makes as specified. (Note : M&L for protecting/covering door/window etc during spray shall be deemed to be included in this item.)
M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of exterior emulsion paint (weather proof anti algae) (Product : Asian Paints Apex) 100% acrylic emulsion paint over a coat of primer with maximum working pressure of 3300 PSI of any colour by Trucare Graco machine/Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working and applying wall care putty for getting smooth surface complete all as specified and directed. Make : Asian Paint or equilvalent of makes as specified. (Note : M&L for protecting/covering door/window etc during spray shall be deemed to be included in this item.)
M&L for preparation of old wooden surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified.
All as per Item No (13) here-in-before but two coat of synthetic enamel paint.
M&L for preparation of old steel surfaces width or girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified.
Cutting and taking out grass shurbs, plants, small tree roots in building wherever periodical services to be carried out in OTM/ Md Accn in any position and at any height (two storey building) and treated with necessary chemical/ acid to avoid for this further growth and disturbed portion making good with PCC 1:2:4 type B0 using 12.5mm graded stone aggregate and 15mm thick plastering etc in CM (1:4) finished fair and even complete all as specified and as directed. (Note : The cost of scaffolding and T&P required for repair will be deemed inclusive in this item).
Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc.complete all as specified.
Dismantling loose concrete cover of RCC coloumns, beams slabs, chajjas and the like as directed, roughening and cleaning in concrete surfacces with steel wire brushes, washed with water and allowed to dry including derusting of steel reinforcement , providing chicken wire mesh fixed with suitable nailis etc as reinforcement to concrete surfaces, applying adhesive/admixture over mesh and providing 20 mm thick (average thickness) dubbing coat in CM (1:3) including 10 thick plastering in CM 1:4 even and smooth complete all as directed including providing scaffolding system on the exterior side, upto two storey building made with wooden balli/bamboo of suitable size or MS tube stiffened with suitable bracing, runners connection with the building, challies for making working platform upto requisite height and required location with essential safety features for the workmen etc. Complete as per direction and approval of Engr-in-Charge.
M&L for 10mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M&L 15mm thick rendering in cement mortar 1:4 to fair/unfair surfaces of wall finished fair and even complete all as specified and as directed.
M & L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions, surfaces finished fair and even complete all as specified and directed by Engineer-In-Charge. Note:- WPC will be measured and paid separately.
M & L for 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall finished even and smooth without using extra cement complete all as specified.
Supply only integral water proofing compound. ISI Marked.
M & L for 6mm thick non asbestos fiber cement building boards fixed to walls with rawl plug not less than 75mm long and steel screws complete including taking down all as specified.
M&L for preparation of new plastered surfaces and applying three coats of white wash as on ceiling surfaces complete all as specified.
M&L for preparation of new plastered surfaces and applying three coats of white wash as on wall surfaces complete all as specified and directed
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over a coat of primer and wall care putty for getting smooth surface complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coat of weather coat exterior paint on wall surfaces over a coat of primer complete all as specified and as directed.
M&L for obliterating old writing of any description n.exc 0.1 Sqm with paint to match existing work complete all as directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian (n.exc 30 CM high) letters etc shall be painted with thick paint so that they stand out boldly and solidly whithout showing marks of brush marks complete all as directed.
M&L for stops, commas, short lines, dashes, hyphens, brackets etc
Dismantling PVC water tanks of capacity exc 250 ltr but n exc 500 ltr and removing to store complete all as specified and directed.
S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size complete all as specified and directed.
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed 20mm bore complete all as specified.
S&F in repair 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store .
S&F 15 mm bore galvanized steel tubes medium grade with all fittings laid concealed/surface in walls complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified
S&F 20 mm bore galvanized steel tubes medium grade with all fittings laid in walls complete all as specified.
Demolition of brick work of any description and in any position built in cement mortar including quoins arches and pillars complete all as specified.
M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.
Demolition of reinforced cement concrete as in Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and as directed.
M&L for reinforced cement concrete (1:1.5:3 ) type A1 using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.
M&L for RCC (1:1.5:3) type A1 using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and as directed.
M&L for formwork to edges of concrete flats, roofs, floors etc not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for fair finished surfaces.
S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .
All as per item No. (48) above but 6 to 8mm dia in stirrups, spacers and binders
M&L for rendering 15mm thick in cement mortar 1:4 on brick masonry /concrete surfaces of walls including finished fair & even when concrete is still green on top of roof using water proffing compound.
Demolition brick tiles / APP membrance by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed by the Engineer-in-charge.
M&L for PCC type B0 (1:2:4 using 12.5mm graded stone aggregate) in padding for maintaining proper slope over roof treatment finished even and fair mixed with Non shrink chemical of Make- FOSROC/SIKA/PIDILITE as per manufacture's sistructions, PCC shall be cured with curing compound fof Make - FOSROC/SIKA/PIDILITE as per manufactures. Rate of Non shrink chemical and curing compound is deemed to be included in the quoted rate.
M&L water proofing treatment to roof slab with APP modified polymeric membrane thickness not less than 3 mm plain membrane (weight of membrane not less than 3.50 Kg +/- 5% per Sqm) and weight of centre core polyster mat shall be 160 gram +/- 15% per Sqm and lower side finished with 10 to 15 micron thermo fusible polyethylene complete all as specified and directed by Engineer-in-Charge with following courses of descriptions below :-Make of membrane shall be SIKA/Super Thermolay APP (STP) / IWL as approved by GE. (a) The surface of roof, parapet and gutters and drains mouth etc over which waterproofing treatment is to be applied shall be thoroughly cleaned of all foreign matter, moss dust etc by wire-brushing and dusting. For cast iron/PVC drains outlets a grove shall be cut around to tuck in the treatment. Concrete angles-fillets provided at junctions between roofs and verticals faces of walls (parapet and other walls) around obstacles such as pipe, chimney stacks etc and other similar situation to ease up about corners. (b) On the prepared surface one coat of Solvent based bituminous primer (Sika® WP shield Primer or other techno commercially Equivalent make of STP/IWL ) shall be applied @ 0.35 to 0.50 Kg/sqm till the surface is properly impregnated. The time delay of laying of membrane after application of primer shall be as per manufacturer instructions (c) Laying of polymeric waterproofing membrane and bonded completely to the substrate & the overlaps are then sealed /fused by flame torch as per manufacturer instructions. (d) The overlaps shall be of minimum 4 Inch (100 mm) side lap and 150mm at end ,sealed by the flame-torch. (e) Applying two coats of aluminium paint over a coat of primer on APP Membrane for non accessible terrace only (M&L for two coats of aluminium paint over a coat of primer shall be measured and paid seperately under relevant item).
M&L for preparation of new surfaces and applying two coats of aluminium paint over a coat of aluminium primer on membrane, over 10cm in width or girth complete all as specified.
Demolition of plain cement concrete incl tiles etc in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed
Demolition of stone slabs of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar. (Note : Debris obtained from demolition will be dispossed off as directed)
M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and as directed.
M&L for non skid coloured heavy duty parking tiles of size 300x300x9-10 mm thick impact resistance over 15 mm thick screed bed in CM 1:6 complete all as directed by Engineer-in-Charge.
M&L for chequered cement concrete tiles 30cm x 30cm x 22mm thick, laid over 15 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of tiles complete all as directed by Engineer-in-Charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade, set, jointed over 25 mm thick sand cushoning all as directed by Engineer-in-Charge.
M/S EASTERN SUPPLIERS
FATEHPUR CONSTRUCTION COMPANY
JOG CONSTRUCTION
Preetpowercontrol
Anjel Engineers Interprises
Agarwal Builders
amitabh upkaram
JEEWAN BUILDERS AND ENGINEERS
SHYAMA CONSTRUCTION COMPANY
pk enterprises
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .