Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.3 L
Closing Date
20 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
WORKS
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (For details refer tender documents)
Similar nature of work means : Construction/repairs/maintenance of any Civil Engg Works.
31 conditions · 2 needing a document upload
The tenderer(s) should submit the BID SECURITY in acceptable form i.e. only through net banking or e-payment gateway or submitted as Bank Guarantee Bond from a Scheduled Nationalized bank of India or as mentioned in the tender documents. The Bank Guarantee Bond shall be as per Annexure- VI(A) and shall be valid for a period of 90 days beyond the bid validity period.( NOTE: For submission of Bid Security in the form of Bank Guarantee, all the procedures mentioned at Para-5 Bid Security (3)(i) to (vii) mentioned in the tender document should invariably be followed.)
Whether History sheet of tenderers (Annexure-2 of Part-II of Tender documents) uploaded duly filled in with supportive documents.
Whether the details of facilities available vis-a-vis the requirements mentioned in STR in a tabular/narrative form if you are not on the approved list of RDSO, if required in the Annexed Document, is submitted.
Whether, EACH PAGE of the copy of documents/certificates in support of credential is self attested/digitally signed by tenderer/authorised representative with signature, stamp & date.
Whether all the documents related "Mandatory Requirement", as applicable and mentioned in the bid documents are enclosed with the tender.
Please submit bank details as per enclosed Annexure-12 of Part - II of Tender Documents or photo copy of a "Cancelled Cheque". (For details refer tender documents)
Please submit Certificate of Familiarisation as per Annexure-1 of Part-II of Tender Documents. (For details refer tender documents)
Please submit required details as required from Annexure 2 to 11 of Part-II of Tender documents duly filled in and signed. Supportive documents/separate sheet are to be submitted, if required. Annex-2: HISTORY SHEET OF THE TENDERER, Annex-3: TECHNICAL EIGIBILITY CRITERIA, Annex-4: DETAILS OF CONSTRUCTIONS MACHINERIES, TOOLS & PLANTS, VEHICLES ETC. AVAILABLE (ON HAND AND PROPOSED TO BE UTILISED, Annex-5: DETAILS OF TECHNICAL AND OTHER PERSONNELS AVAILABLE ON HAND & PROPOSED TO BE ENGAGED. Annex- 6: DETAILS OF WORKS COMPLETED DURING PREVIOUS THREE FINANCAIL YEARS & CURRENT YEAR, Annex-7: DETAILS OF WORKS ON HAND, Annex- 8: DECLARATION REGARDING ASSOCIATION OF RAILWAY OFFICER (S) WITH TENDERER(S), A n n e x - 9 : LIST OF COURT CASES, Annex-10: LIST OF ARBITRATION CASES. Annex- 11: BROAD PLAN FOR EXECUTION OF THIS WORK. (For details refer tender documents)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm/Partnership firm/Joint Venture/Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender . The tenderer(s) shall enclose the attested copies of the constitution of their concern and copy of PAN card along with the tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (for details refer tender documents) NOTE: Any document containing PAN number of the tenderer(s) shall also be considered in lieu of PAN card. However, if no document having mention of PAN number is uploaded, offer will be summarily rejected. (For details refer Tender documents)
For all tenders having advertised cost of Rs.10 lakh or above, the contractor shall have to submit the option to take payment from Railways through a letter of credit (LC) arrangement. The tenderer shall affirm having read over and agreed to the terms and conditions of the LC option. The option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract. (The tenderer have to submit the option to take payment from Railway through a Letter of Credit arrangement) (For details refer Tender documents)
The list of personnel / organization on hand and proposed to be engaged for the tendered work. Similarly, list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work. (For details refer tender documents)
Documents to be submitted as per Clause 14 of GCC-April 2022 in support of (a)Sole Proprietorship firm (b) HUF (c) Partnership Firm (d) Joint Venture (JV) (e) Company registered under Companies Act 2013 (f) LLP (Limited Liability Partnership) (g) Registered Society & Registered Trust. (for details refer tender documents) NOTE: Non submission of above documents will lead to summarily rejection of the offer.
New works, additions and alterations to the existing structures, all ordinary repair and maintenance works of miscellaneous nature and supplies each costing Rs.5,00,000/- or less in the section SSPR - TLHR and TLHR - SAMAL under SSE(W)/TLHR for the period upto 30/06/2027.
e-tender-CENTKUR-49-2026
e-tender-CENTKUR-49-2026
Open
Works - General
12 Months
Khordha, Odisha
₹0
₹2.3 L
20 May 2026
29 Apr 2026
6 May 2026
102 items across 4 schedules · ₹48,98,392.16 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Stone Aggregate (Single size) : 40 mm nominal size | cum | 5.00 | 1,400 | 7,000 |
| 2 | Stone Aggregate (Single size) : 20 mm nominal size | cum | 5.00 | 1,425 | 7,125 |
| 3 | Stone Aggregate (Single size) : 10 mm nominal size | cum | 5.00 | 1,400 | 7,000 |
| 4 | Bitumen solution primer of approved quality | Litre | 20.00 | 50 | 1,000 |
| 5 | Bitumen felt :Type 3 grade 1 | Sqm | 100.00 | 80 | 8,000 |
| 6 | Curing compound | Litre | 50.00 | 41 | 2,050 |
| 7 | Wire brush | Each | 20.00 | 25 | 500 |
| 8 | Soft brush | Each | 20.00 | 25 | 500 |
| 9 | Portland Cement (OPC-43 Grade) | Tonne | 5.00 | 5,156 | 25,780 |
| 10 | White Cement | Tonne | 0.05 | 10,500 | 525 |
| 11 | Stainless steel SS grade 304 , curtain rod 20 mm dia 1.20 mm thick | Metre | 50.00 | 137 | 6,850 |
| 12 | Stainless steel SS grade 304, brackets ( curtain rod) 20 mm dia 1.20 mm thick | Each | 100.00 | 50 | 5,000 |
| 13 | plastic sleeves for screw | Each | 1000.00 | 2.2 | 2,200 |
| 14 | C.P. Brass Extension Nipple (1/2"x2" size) | Each | 20.00 | 46 | 920 |
| 15 | Dry hydrated lime (factory made) | Quintal | 2.00 | 315 | 630 |
| 16 | Linseed oil (double boiled) | Litre | 50.00 | 215 | 10,750 |
| 17 | Aluminium paint | Litre | 40.00 | 170 | 6,800 |
| 18 | Synthetic enamel paint in black or chocolate shade | Litre | 30.00 | 180 | 5,400 |
| 19 | Synthetic enamel paint in all shades except black or chocolate shade | Litre | 60.00 | 178 | 10,680 |
| 20 | Water proofing cement paint | Kg | 100.00 | 41 | 4,100 |
| 21 | Wax polish (ready made) | Kg | 10.00 | 242 | 2,420 |
| 22 | Putty for wood work | Kg | 50.00 | 32 | 1,600 |
| 23 | Pig lead | Kg | 50.00 | 180 | 9,000 |
| 24 | Plug | Each | 100.00 | 10 | 1,000 |
| 25 | Fine sand (zone IV) | cum | 5.00 | 980 | 4,900 |
| 26 | Spun yarn | Kg | 10.00 | 60 | 600 |
| 27 | Acid for cleaning tiles | Litre | 30.00 | 20 | 600 |
| 28 | Bleaching powder | Quintal | 1.00 | 1,700 | 1,700 |
| 29 | G.I. pipes 32 mm dia | Metre | 50.00 | 247 | 12,350 |
| 30 | Polyethylene water storage tank with cover and suitable locking arrangement | Litre | 30000.00 | 6.5 | 1,95,000 |
| 31 | Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore | Each | 50.00 | 32 | 1,600 |
| 32 | Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore | Each | 50.00 | 38 | 1,900 |
| 33 | Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia | Each | 20.00 | 121 | 2,420 |
| 34 | Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia | Each | 10.00 | 138 | 1,380 |
| 35 | 15 mm C.P. brass tap | Each | 20.00 | 297 | 5,940 |
| 36 | Vitreous china flat back wash basin 630x450 mm | Each | 5.00 | 798 | 3,990 |
| 37 | C.P. brass waste 32 mm | Each | 20.00 | 94 | 1,880 |
| 38 | Ply wood 5 ply with commercial ply on both faces 6 mm thick | Sqm | 15.00 | 321 | 4,815 |
| 39 | 12 mm commercial ply | Sqm | 15.00 | 527 | 7,905 |
| 40 | Hydraulic door closer bottle type M.S. body with necessary accessories and screws complete | Each | 20.00 | 699 | 13,980 |
| 41 | Aluminium primer | Litre | 20.00 | 140 | 2,800 |
| 42 | Red oxide Zinc chromate primer | Litre | 20.00 | 140 | 2,800 |
| 43 | Stainless steel kitchen sink - with drain board 510x1040 mm bowl depth 250 mm | Each | 5.00 | 3,200 | 16,000 |
| 44 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings | Each | 100.00 | 27 | 2,700 |
| 45 | Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings | Each | 50.00 | 36 | 1,800 |
| 46 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings | Each | 100.00 | 38 | 3,800 |
| 47 | Coloured High density polyethylene / poly propylene 10 lit. (full flush) capacity controlled low level flushing cistern with fittings | Each | 20.00 | 583 | 11,660 |
| 48 | 15 mm PTMT bib cock | Each | 250.00 | 70 | 17,500 |
| 49 | 15 mm PTMT bib cock long body with flange | Each | 150.00 | 106 | 15,900 |
| 50 | PTMT push cock 15 mm dia | Each | 200.00 | 61 | 12,200 |
| 51 | PTMT Pillar cock (fancy) 15 mm foam flow | Each | 100.00 | 136 | 13,600 |
| 52 | PTMT - Waste Coupling 31/32 mm each 35.00 | Each | 60.00 | 35 | 2,100 |
| 53 | PTMT Ball Cock 15 mm complete with Epoxy Coated Aluminium Rod & H.D. Ball | Each | 50.00 | 79 | 3,950 |
| 54 | PTMT Ball Cock 20 mm complete with Epoxy Coated Aluminium Rod & H.D. Ball | Each | 50.00 | 120 | 6,000 |
| 55 | PTMT Angle Stop cock with Flange 15 mm | Each | 150.00 | 92 | 13,800 |
| 56 | PTMT Liquid Soap Container of 400 ml capacity | Each | 30.00 | 103 | 3,090 |
| 57 | PTMT - Towel Rail (450 mm long ) | Each | 20.00 | 132 | 2,640 |
| 58 | Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm nominal dia | Metre | 50.00 | 43 | 2,150 |
| 59 | Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia | Metre | 100.00 | 59 | 5,900 |
| 60 | Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia | Metre | 100.00 | 95 | 9,500 |
| 61 | Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm nominal dia | Metre | 50.00 | 325 | 16,250 |
| Schedule total | ₹5,53,930 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
E tender condition
ATTACHMENT
SpecialcondtionWorksZonalTLHR.pdf Spl condn Zonal work
ATTACHMENT
TenderConditions-GCC23.03.2026.pdf
ATTACHMENT
SpecialcondtionWorksZonalTLHR.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .