REPAIRS TO ROOF COVERING, FALSE CEILING, JOINERY, PLASTERING, FLOORING, PLUMBING, SANITARY FITTINGS AND CONNECTED WORKS IN MILITARY HOSPITAL, RASHTRIY MILITARY SCHOOL, GE OFFICE OF AREA NO. 2 UNDER GE BELGAUM.

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit complete. all as specified and as directed.

Description all as per item no :01 here in before but bedded in lime or cement mortar

Material and labour for Roof tiles ,Manglore pattern,interlocking at side joints ,laid dry complete. all as specified and as directed.Note:Make of Mangalore pattern tile :Charminar, Raja Tiles, RECHO, Prajapat

Fixing only roof tiles, Mangalore pattern or similar tiles in roofing. Interlocking at side joints laid dry complete all as specified and as directed . Note : Serviceable roof tiles obtained from item No.01 shall be reused under this item .

Material and labour for Ridge or hip tiles to suit Mangalore pattern of roofing tiles ,bedded and jointed in cement mortar 1:6 complete all as specified and as directed . Note:Make of Mangalore pattern tile :Charminar, Raja Tiles, RECHO, Prajapat

Material and labour for IInd class hard wood wooden boarding 20mm thick clean sawn with butt joint with nails in any situation and dismantling of existing un serviceable boarding of any description fixed in any position with nails and taken as credit complete all as specified and as directed .

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed including dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description taken as credit complete all as specified and as directed.

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated steel sheeting any gauge ,thickness and in any position and taken as credit complete. all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge , valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Mild Steel work as in wind ties etc. for roof including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embeded in concrete including taking out embedded portion and making good disturbed ground and serviceable items taken as credit complete. all as specified and as directed.

Dismantling ballies, hard or soft wood, any position, type T-2 including taking out iron straps, bolts and nuts, etc and scrap iron taken as credit complete all as specified and as directed .

Supply and fix Rolled mild Steel work in tubular trusses, posts,rafters, truss etc including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and as directed .

Supply and fix Rolled mild Steel work in roof truss (framed),trussed,purlins ,crane gantries ,rails and fastening and heavy brackets framing (beams,tee,angle,channel or flat sections) including distance pieces ,cleats confirming to Fe 410-W(Gde-E-250) quality-A complete all as specified and as directed.

Supply and fix 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grid of size 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire and all hanger fittings etc and applying two coats of oil bound distemper on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works and taken as credit and making good disturbed wall/ ceiling surfaces along with necessary refixing of electrical fittings /extension of fan rods complete all as specified and as directed. Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Taking down chowkats with shutters of size n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and asdirected.

Taking down chowkats with shutters of size exc 1.50 sqm but n,exc 4.0 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and asdirected.

Taking down shutters of any description of size n exc 1 sqm each and taken as credit complete all as specified and asdirected.

Taking down shutters of any description of size exc 1 sqm and n exc 2.0 sqm each and taken as credit complete all as specified and asdirected.

Material and labour for 2nd class hard wood chowkhat or frame, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position complete all as specified and as directed.

Material and labour for Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 12mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkatscomplete all as specified and as directed.

Material and labour for Factory made 35 mm thick 2nd class hard wood glazed/ gauged shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkatscomplete all as specified and as directed .

Material and labour for Factory made 30mm thick 2nd class hard wood glazed/ gauged window/ ventilator shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b) and fitted to chowkats completre all as specified and as directed.

Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed .

Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawingcomplete all as specified and as directed.

Material and labour for Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm including provision of 4mm sheet glass ordinary quality and stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm for panels including provision of all hardware fittings such as aluminium anodised handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed. Note:(i) Each window shall be provided with 2 glazed shutters + 1 wire mesh shutter. (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco . (iv ) Make of Stainless steel wire mesh : (v) Make of Glass : Saint gobain/modi Guard/Gold fish

Supply and fix in repair Powder coated aluminium frame/shutter for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets.

(iii) Particle board/ glass panels wherever required shall be measured and paid separately. (iv) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of Powder coating shall be of 50 Microns

Supply and fix in repairs Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and as directed. Note :(i) Make of Aluminium anodised section : Jindal/Hindalco/Indal (ii) Minimum thickness of anodisation shall be of 15 Microns

Supply and fix MS butt hinges cold rolled medium weight 100mm size fixed with MS screws complete all as specified and as directed.(ISI MARKED)

Supply and fix Stainless steel butt hinges 100mm size fixed with SS screws complete all as specified and as directed.(ISI MARKED)

Supply and fix in repairs 300mm long Mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete fixed to wooden/ steel chowkats all as specified and as directed. (ISI MARKED)

Description all as specified in item no :32 here in before but fixed in repairs

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. Make : Crown/Classic/Adarsh

Description all as specified in item no :34 here in before but fixed in repairs

Supply and fix in repairs 150 mm long extruded section Aluminium alloy anodised handles D type complete all as specified and directed. Make : Crown/Classic/Adarsh

Description all as specified in item no :36 here in before but fixed in repairs

Supply and fix in repairs 125mm long extruded section Aluminium alloy anodised handles D type complete all as specified and directed. Make : Crown/Classic/Adarsh

Supply and fix aluminium alloy anodised sliding door bolt 300mm long with hasp & sample (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed . Make : Crown/Classic/Adarsh

Description all as specified in item no :39 here in before but fixed in repairs

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with stainless steel staples complete all as specified and as directed.(ISI Marked)

Supply and fix in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with stainless steel staples complete all as specified and as directed.(ISI Marked)

Supply and fix in repairs Harrison rail , mild steel,chromium plated curtain rod, fancy type, 25mm dia including brackets ,stops and rollers with end designer caps complete all as specified and as directed.

Hacking out old broken glass (any thickness,size , quality or description) from wooden frames ,glazed with putty or fixed with beads and removal of debris off the premises complete all as specified and as directed

Supply and fix 4.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in square of size not exc 0.50 Sqm each pane. complete all as specified and as directed . Make of Glass : Saint gobain/modi Guard/Gold fish

Description all as specified in item no :45 here in before but of size exc 0.50 Sqm each pane

Supply and fix 4mm thick figured glass,pin head type and glazing with oil putty in square of size not exc 0.50 Sqm each pane. complete all as specified and as directed . Make of Glass : Saint gobain/modi Guard/Gold fish

Description all as specified in item no :47 here in before but of size exc 0.50 Sqm each pane

Supply and fix in repairs for 18mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairscomplete all as specified and as directed.Note : Make of Particle board : Anchor/KitPly/Century

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 complete all as specified and as directed

Material and labour for PCC 1:3:6,type C-1 ,using 20 mm graded stone aggregate as in coping ,bed blocks, eaves filling between wall and tile/sheet roofing ,as in chowkhat and similar work including necessary steel form work complete all as specified and as directed..

Taking down cement plaster on brick or stone wall etc. including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed..

Material and labour for Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished fair and even without using extra cementcomplete all as specified and as directed..

Material and labour for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Material and labour for Preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed

Material and labour for Preparing newly plastered surfaces of wall , cornices, pillasters, etc. and applying two coats of oil bound distember(Acrylic distember washable) ovea a coat of Chalk whiting primer complete all as specified and as directed.

Material and labour for Two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depo tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over newly plastered surface complete all as specified and as directed.

Material and labour for Preparing old plastered surfaces of wall , cornices, pillasters, etc by washing, rubbing down and stopping etc and applying one coat of oil bound distember(Acrylic distember washable) complete all as specified and as directed.

Material and labour for complete removal of existing treatment and Preparation of old surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc and applying two coats of oil bound distemper (Acrylic washable distember) over a coat of alkali resistent primer over 1mm thick layer of wall care putty complete all as specified and as directed.

Material and labour for Preparation of new surfaces of steel of any description n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed

Material and labour for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink oxide primer.complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base of flooring including necessary steel form work complete all as specified and as directed.

Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Vitrified ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqmbut not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Premium quality coloured ceramic tiles, edge cut, 8 to 9mm thick, area of each tile exc 0.18 Sqm but not exc 0.36 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Premium quality glazed ceramic tiles coloured of size 450x300x7 mm thick over vertical surfaces such as skirting , dado etc , set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Dismantling of stone slab or tiles , paver blocks of any description and any thickness in floors, aprons etc., laid bedded and pointed in any mortar and taken as credit complete all as specified and as directed.

Demolition of cement concrete in ground floors n exc 15cm thick unreinforced (below or above ground level) and removal of debris not exceeding 100 meters complete all as specified and as directed .

Material and labour for PCC 1:4:8 (type D-2) using 40 mm graded stone aggregate , 75 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 (type B-1) using 20 mm graded stone aggregate , 100 mm thick as in floor including necessary steel form work complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking coloured paver block of 55 to 60mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement and pigment ,M-35 grade complete all as specified and as directed.

Material and labour for River Sand filling under floors or in foundations including spreading ,levelling , watering and consolidation complete all as specified and as directed.

Supplying and laying 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed. Note : Make of CPVC Pipe : AShirwad/Astral

Supplying and laying 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed.Note : Make of CPVC Pipe : AShirwad/Astral

Supplying and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceilings or laying in floors including taking down up ro down old damaged pipe and taken as credit complete all as specified and as directed.Note : Make of CPVC Pipe : AShirwad/Astral

Material and labour for Plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate, 75mm thick as in plinth protection, finishing the surface fair and even, in panels and filling joints with mortar, etc.including necessary steel form work complete all as specified and as directed.

Supply and fix in repairs 15mm bore bib tap, brass CP, fancy type, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Note : Make : Metro/GEM/ESS ESS

Supply and fix in repairs 3 way mixer tap for mixing hot and cold water, fancy type, brass chromium plated screwed down for 15mm bore GI pipecomplete all as specified and as directed. Make: JAQUAR/ JOHNSON/ CERA

Supply and fix in repairs 15mm bore dia PTMT bib tap, standard type, (Minimum weight 90gms) any colour, high pressure screwed for iron pipe complete all as specified and as directed.

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix in repairs 15mm bore dia Stop valve, fancy type, brass chromium plated, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. Note : Make : Metro/GEM/ESS ESS

Supply and fix in repairs 15mm bore pillar taps brass chromium plated with capstan heads, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down high pressure screwed for iron pipe for unions complete all as specified and as directed Note : Make : Metro/GEM/ESS ESS

Supply and fix in repair Vitreous china oval type wash basin, white, size 550x400mm, with waste pipe and waste fittings including CI brackets and cutting for and pinning in ends of brackets or erecting stands etc complete all as specified and as directed.

Supply and fix in repairs Vitreous china squatting pan, Orissa pattern of size 580 x 440 mm, white, with integral foot rest including 'P' or 'S' trap and provision of lime concreting and connection to trap and to flushing pipe,anti syphonage pipe complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of any colour as approved by GE, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and flushing pipe including provision of PVC flush pipe complete all as specified and as directed.

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed.

Supply and fix in repair kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420 mm and bowl size 410mm X 330mm X 160mm complete all as specified.Note :Make :Nirali/Joyna/Commander

Supply and fix in repairs PVC flexible pipe (waste pipe) ,suitable for 32 mm bore dia waste coupling of sink/wash hand basin complete all as specified and as directed .

Supply and fix in repairs Waste coupling of PTMT with necessary washers ,half or full threated ,minimum weight 45 gms,suitable for 32 mm bore discharge pipe of WHB /Sink complete all as specified and as directed.

Supply and fix in repairs Brass chromium plated towel rail 600mm long with and including Chromium plated brass screws and wooden/ plastic cleats.complete all as specified and as directed.

Supply and fix in repairs brass chromium plated perforated shower rose swivel type 125mm size suitable for fixing with 15mm bore pipe including 300mm long brass CP shower arm complete all as specified and as directed

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs grating doom ,125 mm dia of PTMT(minimum weight 40 gms) with waste hole complete all as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs grating doom ,100 mm dia of PTMT(minimum weight 25 gms ) with waste hole complete all as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar and removal of debris off the premises.complete all as specified and as directed

Supply and fix 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince

Supply and fix 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince

Supply and fix in repairs 50mm bore LDPE pipes of pressure rating 6 kg/ Sqcm fixed to walls, ceilings, or in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince

Supply and fix 32mm bore x 900mm long LDPE pipes of pressure rating 6 kg/ Sqcm fixed to wash basin/ urinal complete all as specified and as directed . Note :Make :Finolex/Supreme/Prince

Supply and fix 75mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed . Note :Make :Finolex/Supreme/Prince

Supply and fix 110 mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed . Note :Make :Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) branch piece, single Y, equal or unequal with access door complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) vent cowl complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince

Supply and fix PVC (SWR) floor trap plain , 75mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed.Note :Make :Finolex/Supreme/Prince

ASHOK M RAJGOLKAR

SANJAY B SHARMA

M/s. VIJAY ELECTRICALS

M/S JAYDEEP CONSTRUCTION

DHANSHRI ENTERPRISES