SAYALKUDI 15TH FINANCE OHT

Amount

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification . for Foundations SS 20B TNDSS NO. 23 &24 V, VI (S2) VI 9

Supply delivery and filling of River Sand in layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyence of sand to Site and all labour charges and all other incidential charges etc,. complete as per Standard Specification TNDSS NO. 24 &25 NBC Part VI (S2) 8

Plain Cement concrete of mix 1:4:8 (One cement four sand and eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. TNDSS NO.28 V,VI S25

Reinforced Cement Concrete 1:1½:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering , Centering and cost of Reinforcement grills but including curing ,finishing etc complete with standard specification and as directed by Engineer incharge. TNDSS NO. 28 V,VI S25

For items 1.5m to 4.5m below GL

Items 0 to 1.5m Below G.L

Above GL and Upto 4.5m

Above 4.50m and upto 7.32 from GL

For items above 7.32m & up to 10.98m from G.L

For items above 10.98m & up to 14.64m from G.L

For items above 14.64m & up to 18.30m from G.L

Supplying & Erecting of steel centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). TNDSS NO.86 K, 86 A

Plain surface Below GL

From GL to 3.30m

From 5.30 to 6.30m above GL

From 8.30 to 9.30m above GL

From 11.30 to 12.30m

square column below up to 3.30M Above GL

3.31m to 4.30m height

4.31m to 5.30m height

5.31m to 6.30m height

6.31m to 7.30m height

7.31m to 8.30m height

8.31m to 9.30m height

9.31m to 10.30m height

10.31m to 11.30m height

11.31m to 12.30m height

Curved Surface-upto 3.30m ht

Supplying and Fabrication of Steel and placing in position TMT for RCC works as per design given including cost of steel and GI binding wire and labour charges for cutting bending tying etc etc,. Complete complying with standard specification in force and as directed by department officials.- TNDSS NO. SS 86 & 86A V,VI, VII (S6) 7,3

Painting the new walls two coats over one coat of priming with best Cement paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers TNDSS NO.72G

Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 Nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers. For OHT

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 using 20mm HBG stone for O.H.T including cost of Reinforecement placing grill in the possition centering and shuttering charges mixing concrete curing etc to required height clear width of 45 cm consisting of 2nos vertical post of 10 x 15cm and step slab of 25 x 25mm etc completely and as directed by Town panchayat Engineers.

ProvidingGI ventilating arrangements mosquito proof nylon net with 50mm GI cowl and as directed by departmental Engineers.

Supply and delivery of following sizes of FRC Manhole Covers / Frames to stores as per IS 12592:2002 to its latest revision with reinforcement details for covers and frames 600mm dia FRC manhole frame to have clear opening of 600mm dia to suit 600mm dia FRC Cover

Refilling the foundation with excavated earth including cost and conveyance fo all materials and labour charges etc complete as per standard specification. As per PWD SR Page No.26 sl.No 76

Providing Inlet and Outlet pipe arrangements(GI pipe) including cost and conveyance of all materials and labour charges etc complete as per standard specification.

65mm GI Pipe

65mm GI Elbow

65mm GI flangeset

65mm GI Coupling

80mm GI Pipe

65mm GI Tee

80mm GI Elbow

80mm GM Gate Valve

65mm GM Gate Valve

80mm GI flange set

80mm GI Coupling

RAMESH KANNAN K (BID ID -1357133)