REPAIR TO SECURITY FENCING PATH HARD STANDING AND RETAINING WALLS AND CLEANING / REPAIR AND REPLACEMENT OF SEWAGE LINE ST SW DRAINS CULVERTS AND MISC WORKS AT RHENOCK AND RONGLI UNDER GE 867 EWS

Amount

M & L for excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/dense soil complete all as specified and directed.

M & L for cement concrete type C2 (1:3:6) (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as per specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standerds, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type.

S & F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to stepsincluding embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of neck 11 to 15 mm complete all as specified and directed.

M & L for mild steel round Bars gd.I. IS-432 (Part I) 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spcified and directed.

M & L for preparation of new steel surfaces of any description, over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n.exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying coat two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10cm width or grith and applying two coats of black japan paint over a coat of red oxide / zinc chrome primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-2, (1:2:4) (40mm graded aggregate) as in floor finished even and smooth using extra cement complete all as specified and directed.

M&L for cement concrete type C2 (1:3:6) (40 mm graded stone aggregate) as in surface channels and drain etc, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aaprons etc., laid and bedded and pointed in any mortar complete all as specified.

M & L 75 mm thick type C2, (1:3:6) cement concrete ( 40 mm graded agggregate) in as sub base complete all as specified and directed.

M & L chequred cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness , M-35 Grade with grey cement and pigment with colour rubber finishes on top over sand dust cushions. (Note - Sand for cushioning will be measured and paid seperatly)

M & L for sand filling ( as cusioning under interlocking paver block) including watering and consolidation complete all as specified.

M&L for cement concrete Type B-1, (1:2:4) (20mm graded aggregate) as in kerbs for interlocking tiles etc complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete type C1 (1:3:6) (20mm graded aggregate) block masonry with solid blocks, exc.10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

M&L for pre-cast cement concrete type C1 (1:3:6) (20mm graded aggregate) block masonry with solid blocks, exc.10cm in width and except blocks setting in cement mortar (1:6) complete all as specified and directed.

M & L for cement concrete type D2 (1:4:8) (40 mm graded aggregate) in foundations, filling and mass concrete including demolition of concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for providing, cement concrete type C1 (1: 3:6) (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed fixed in as weep hole complete all as specified and directed.

M & L for Flush pointing to block in course or ashlar masonry or concrete block walling in cement mortar (1:4) all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surface in cement plaster (1:6) complete all as speciifed and directed.

M&L for 15mm thick rendering on fair faces of brick work or concerte surface in cement mortar (1:3), finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concerte surface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing new plastered or unplastered surfaces and painting with three coats of white washing on walls complete all as specified and directed.

Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil complete all as specified and directed.

M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

S & F 100mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including demolition and breaking up of existing pipe with accessories set in cement mortar complete all as specified and as directed.

S&F of 110mm dia PVC (SWR) single socketed in any length with rubber ring joints laid in trenches or in floor including demolition and breaking up of existing pipe with accessories set in cement mortar complete all as specified and as directed.

S&F of 160mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches including demolition and breaking up of existing pipe with accessories set in cement mortar complete all as specified and as directed.

S & F 150mm dia salt glazed stone ware drain pipes laid in trenches and jointed including demolition and breaking up of existing pipe with accessories set in cement mortar complete all as specified and as directed.

M & L PCC 1:3:6, type C-2 concrete bed to drain pipes of dia 100/110mm incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M & L PCC 1:3:6, type C-2 conrete bed to drain pipes of dia 150/160mm incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

S & F cast iron bends (any radius) diminishing pieces or taper 100mm bore complete all as specified and as directed.

Cleaning of exsting choked sewage line of pipe 100/110 mm bore by rodding and watering and taking out sluge through manholes etc. complete and disposal of same to a previously dugged out pit after filling the upper surface with earth and 2 cm thick lime over filled earth including sprinking of bleaching power complete all as specified and directed.

Cleaning of exsting choked sewage line of pipe 150/160 mm bore by rodding and watering and taking out sluge through manholes etc. complete and disposal of same to a previously dugged out pit after filling the upper surface with earth and 2 cm thick lime over filled earth including sprinking of bleaching power complete all as specified and directed.

Cleaning existing man holes, septic tank etc by dewatering and taking out sludge and solid deposits from the septic tank and man holes etc completely and browing the sludge and solid diposited in a nearly dug pit with in 100mtr and covering the sludge and solid deposited etc with earth and 2cm thick lime on top surface to prevent spread of foul smell after taking out sludge and solid deposits, the inside of the septic tanks manholes etc should be cleaned with water complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast cement concrete type-B-1, (1:2:4) (20 mm graded aggregate) as in in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement morter (1:6) complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia,cut to length,bent to shape required,including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as spcified and directed.

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as spcified and directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

M/S JAYSHREE CONCERN

RAMESH GURUNG

RAJU TAMANG

PRASAD PRADHAN AND SON

MS MAYA PRAKASH GOEL AND SONS

MS BRAHMA CONSTRUCTION

M/S G. K. SUTHAR