CA CWE/PAT/T-42/2019-20 SPECIAL REPAIR OF OFFRS MD ACCN BLDG NO 91 and 92 AT TARAPORE UNDER GE SOUTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec III (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Supply only chicken wire mesh 22 gauge of size not less than 20X20mm all as specified & as directed.

Complete removal of existing treatment of any type/description from external/internal/ceilings surfaces/walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed.

Preparation of new plastered surfaces/existing plastered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers /balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Make of Wall Putty : JK Wall Putty / Birla Wall Care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac. Make of Interior Emulsion : Asian (APCOLITE PREMIUM EMULSION) /Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL)

Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 12 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (APCOLITE PREMIUM EMULSION) /Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL)

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square,light shade single charged vitrified tiles in 600x600x 9 to 10 mm thick in floors etc. in approved shade, set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified. Make : Johnson / Kajaria / Nitco / RAK or as approved by Accepting Officer.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac. Make of Exterior Emulsion : Asian (APEX) /Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL)

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square, single charged vitrified tiles in 600x600x 9 to 10 mm thick in approved shade, set & jointed in neat and pointed in white or coloured cement to match, as in skirting not 150mm high etc. in any pattern of light or dark tiles as approved, over & including 10 mm thick screed in cement mortar (1:4) complete all as specified. Make : Johnson / Kajaria / Nitco / RAK or as approved by Accepting Officer.

Providing and Laying Premium (1st) quality straight edge, stain free, matt finish, square porselano vitrified tiles in 600x600x 9 to 10 mm thick / area of each tile exc. 0.35 sqm but not exc. 0.40 sq. mtr in floors/skirtings etc. in approved shade, set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified. Make : Johnson / Kajaria / Nitco / RAK or as approved by Accepting Officer.

Providing and Laying Premium (1st) quality straight edge, plain square outdoor vitrified full body tiles with in 400x400x10 mm thick as in skirting in cement slurry over and including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed by Engineer in Charge. Make : Johnson/ Kajaria / Nitco / RAK / Somany.

Providing and Laying Premium (1st) quality digitally printed straight edge, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow DK / LT/HL for Toilets & Verona LT/HL for Kitchens) or equivalent from Kajaria / Nitco as approved by Accepting Officer.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved/matching with wall tiles , set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white or coloured cement to match, in floors etc. complete all as specified. Make : Johnson (Digital HD Tiles) (Barstow Coordinated floor) or equivalent from Kajaria / Nitco as approved by Accepting Officer.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

Labour only for making of grooves of size 4-5 mm wide and 2-3mm deep on steps of baroda green/kota stone or of any description with hand cutter/grinders complete all as specified and directed.

S&F factory made ISI marked flush door shutters 35mm thick, BWP confirming to IS 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including S&F of stainless steel 304 Grade (natural finish) wire cloth (nominal wire dia. 0.36mm and ave. width of aprature 1.40mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf

S&F powder coated 50 microns extruded aluminium doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick PVC Celuka board wooden finish pre laminated on single side and plain on other side below middle/lock rail and 5mm thick frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. catalouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom - 20957, Three track top/vertical-20958, handle-20606, Interlocking-20605, Top and Bottom - 20604.

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5X38.10X1.29 mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6X63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified.

S&F 25mm bore minimum 1mm thick stainless steel curtain rods with stainless steel brackets and stainless steel finials of same manufacturer including stainless steel screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified. Note : Brackets and finial shall be measured and paid separately for supply only and fixing is deemed to be included in this item.

Supply only stainless steel brackets for fixing of 25mm bore curtain rods complete all as specified.

Supply only stainless steel finials for fixing of 25mm bore curtain rods complete all as specified.

S&F overhead shower 100mm dia with shower arm of 450mm long 20mm dia round shape with 90º bend for wall mounted shower with flange of same make and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified. Make : Jaquar (Shower-OHS-1989, Shower Arm-SHA-479L450) or equivalent from Cera as approved by Accepting Officer.

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaquar (Vintage Prime Series) / Cera (Valentina Single Lever Series) / Hindware (Fluid Series) or equivalent as approved by Accepting Officer.

S&F Bib taps, 2 way CP, fency type with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaquar (Vintage Prime Series) / Cera (Valentina Single Lever Series) / Hindware (Fluid Series) or equivalent as approved by Accepting Officer.

S&F Bib taps with nozzle, CP, fency type with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaquar / Cera / Hindware or equivalent as approved by Accepting Officer.

S&F single liver basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and all as specified. Make : Jaquar (Vintage Prime Series) / Cera (Valentina Single Lever Series) / Hindware (Fluid Series) or equivalent as approved by Accepting Officer.

S&F single liver 3 inlet divertor consisting of exposed kit with operating lever, wall flange and button and concealed body for 3 inlet single lever divertor with button assembly cartidge sleeve and also including spout with wall flange chromium plated, screwed down, high pressure all as specified. Make : Jaquar (Vintage Prime Series) / Cera (Valentina Single Lever Series) / Hindware (Fluid Series) or equivalent as approved by Accepting Officer.

S&F single lever sink mixer with swinging spout,with connecting legs & wall flanges, wall mounted, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Vintage Prime Series) / Cera (Valentina Single Lever Series) / Hindware (Fluid Series) or equivalent as approved by Accepting Officer.

S&F Stop valves, fancy type, CP with long shank and cup ( concealed typee ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Jaquar (Vintage Prime Series) / Cera (Valentina Single Lever Series) / Hindware (Fluid Series) or equivalent as approved by Accepting Officer.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Vintage Prime Series) / Cera (Valentina Single Lever Series) / Hindware (Fluid Series) or equivalent as approved by Accepting Officer.

S&F vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Jaquar (Continental Series -CNS-WHT-963N or equivalent from Parryware / Hindware / Cera as approved by Accepting Officer.

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and 'S' type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size complete in all respect all as specified. Make : Jaquar (Concealed Cistern-JCS-WHT-2400S, Flush Plate-JCP-CHR-812415) or equivalent from Hindware / Parryware as approved by Accepting Officer.

S&F health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified. Make : Jaquar (ALD-573) or equivalent from Hindware / Parryware / Cera as approved by Accepting Officer.

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. Make : Hindware (WHB-Garnet(Cat No - 10080) Waste Coupling-Cat No-F850023 (Economy Model), Bottle Trap-Cat No-F850072 (Economy Model) or equivalent from Jaquar / Parryware / Cera as approved by Accepting Officer.

S&F Stainless Steel Towel Rack 600mm long with lower hangers including all accessories as recommended by manufacturer for fixing and complete fixed in position in all respect and taking down existing of any description/size all as specified. Make : Jaquar / Hindware / Cera as approved by Accepting Officer.

S&F single bowl with drain board, glossy finish kitchen sink manufactured from 1.0 mm th. 304 Grade stainless steel of size 1040X500 (41"X20") and depth 205mm (8") top mount type including S&F outlet connection pipe for double bowl sink and 304 grade round strainer of 110 mm dia and all other accessories as recommended by manufacturer for fixing and complete fixed in position in all respect and taking down existing of any description/size all as specified. Make : Cera (Prince Series), Strainer-B4811511, Outlet Conn-B4811501) or equivalent from Diamond / Nirali as approved by Accepting Officer.

S&F sheet glass shelf assembly consisting of 5.5 to 6mm thick glass shelf 12 cm wide and 450mm lomg with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified.

S&F sheet glass shelf assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified.

M&L for toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. Make : Jaquar Cat Part No CAN-1151N / Marc / Cera or equivalent as approved by Accepting Officer.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe all as specified.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Conventional) / Hindware (Slick) or equivalent from Parryware.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Sleek Essence Dual Flush) / Cera (Corona) / Prayag (Vintage) or equivalent from Parryware.

S&F CP jet for EWC with chrome finished connction pipe including all accessories for fixing complete in all respect all as specified.

S&F vitreous china premium/1st quality corner wash hand basin , white colour, size 350x350 mm, screws & plug and brackets/aluminium angle etc. including S&F all accessories as recommended by manufacturer screwed for pipe or connections for fixing, packing, union complete in all respect and taking down existing of any description/size all as specified. Make : Hindware / Jaquar / Cera.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

S&F doubled layered ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves 20mm, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified. Make : Sintex / Diplast / Sheetal.

S&F doubled layered ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves 20mm, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified. Make : Sintex / Diplast / Sheetal.

Demolition of reinforced cement concrete of any description and in water srorage tank of any size/capacity/description/position located on terrace of the building including moving the demolition portions to low lying area or out of defence land all as specified and directed.

Disconnecting existing tanks of any capacity/size, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover with nut & bolts and 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

S&F PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, including S&F of bends/fittings as required and fixed to walls incl cutting chases if required for concealed water tubing and making good, cutting not exc 10 cm girth etc complete all as specified.

S&F single Y-shaped CI junction pieces, ordinary or inverted (spigot or socket type) for 100mm bore pipes complete all as specified.

Providing and laying 4mm (-0.2/+0.3) thick APP with mineral finish (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 5.6 Kg/sq.m water proofing membrane mineral finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps over the coat, 4mm th 5 layered APP membrane mineral finish shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Tensile strength in longitueinal and transverse direction as 600±150/400±150 N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 200 N/. Softening point of membrane not less than 145 degree (iii) Penetration @25 C d 15-25mm (iv) Water Tightness 10 kPa (v) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make : Sika / STP / Fosroc.

S&F 18 mm thick with minimum density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / M/s Kumar Arch (P) Ltd or equivalent as approved by Accepting Officer.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Make : KAFF / Hettich / Godrej.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs. Make : KAFF / Hettich / Godrej.

S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal complete fixed in position all as specified.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. Make : KAFF / Hettich / Godrej.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/ cup&saucer/ bottle /multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified. Make : Hettitch / Godrej / Kaff.

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified. Make : Hettitch / Godrej / Kaff.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified. Make : Hettitch or equivalent as approved.

M&L Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 mm micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work & scaffolding where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

M&L for Baroda Green marble, machine cut as in shelves / steps / cills / jambs / skirting / border and the like works and flooring etc, 15-16 mm thick including bull nose the front length, set and jointed / fixed with araldite or equivalent adhesive and including steel clamps and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and directed by Engineer in Charge. Note : Single piece should be used in steps / cills / jambs / shelves.

Steel windows box type using ERW hollow 'P' section comprising double frame for gauged and glazed skelton shutter jointed internally with flat iron 40 x 4 mm complete including grill of 8 mm square bars, fixed horizontally @ 10 cm c/c, hinges, handle, tower bolts, stops, lugs etc all as shown on drawing No. TD-219 (c) sheet 1/3 to 2/3 complete and also including supply and fixing of 4 mm thick glass and stainless steel wire cloth irrespective whatever shown on drawing. Note : This item will be executed in Servant Qtrs only.

Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

Supply & fix in replacement of existing unserviceable FTL with new techonlgy self ballasted LED retrofit tube lamp with thermoplastic polycarbonate bodydiffuser having high efficacy suited for installation including box type pre coated CRCA BODY batten, heavy duty regal batten including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface. with G5 lamp holders to give glare free light of capacity 18W 6500 kLED .

Supply & fix in replacement of existing unserviceable mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

Supply and fix LED Lamp LED new Adore 7W E27 WW Ball Lamp LHLDERHEMD 8X007 7 watt all as specified and direced.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I

Supply and replace existing unserviceable SP&N enclosure with 2 pole and Earth Metal Plug & Socket for incorporating 10A / 20A SPN / DP MCB

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt all as specified and directed.

Supply & fix ceiling fans complete with all accessories 230 V,1200 mm sweep. BEE 5 star rated.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

S&F IP 55 Surface mounted LED Porch light 9 watt in engineering plastic housing with clear plastic housing with clear prismatic diffuser.

S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways (one incoming three phase & four out goings three phase )for MCCB,ISOLATOR&MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC 415 VOLTS 10 KA IHLGSF0100 =01 NO as incoming (Note :- (i)The DB shall be VTPN series of MDS-LOADKONTAKT/Havells - CAT PART – DHDLVDRWG0F004 or equivalent L&T , ABB . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated . Note: Fixing of geyser on wall with suitable size anchor bolt with hammer drill and making good the disturbed surface including plaster work shall be part of job at no extra cost.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver . Note: Fixing of Exhaust Fan on wall with suitable size anchor bolt , making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost.

S&F LED building light IP66 powder coated pressure die cast aluminium compact high power LED street light fitting 25 watt with heat resistant toughned glass complete with all accessories.

Shivam Engg and fabricators

M/S Mukesh Kumar Gupta

Jawandha Enterprises

Vipin Kumar and Brother