GENERAL FUND 2024-25 IN EDAIKAZHINADU TOWN PANCHAYAT

Conducting Geophysical Survey, quantity and quality test and transportation charges etc., complete

Drilling of borewells of size 6" to 8" dia. in sedimentary formation using hand boreset including insertion of casing pipe etc., and supplying and packing of pebbles (Conveyance of hand bore set including loading and unloading to be done by the contractor) tward board 2024-2025 PG No.197

Reaming 150 mm dia pilot bore to required directed by the TWAD Board Officer.. Upto 60 m depth ending below ground level (TWAD SR 2024-25, P.No.199

Supply and delivery of un plasticised 150 mm dia PVC Plain casing pipes of 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS 12818/92 and as amended from time to time to suit the borewell upto 80m depth with ISI marking including, loading, unloading, freight, stacking and transit insurance charges etc., complete (TWAD SR 2024-25, P.No.06

Supply and delivery of un plasticised150mm dia PVC slotted casing pipes of 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS 12818/92 and as amended from time to time to suit the borewell upto 80m depth with ISI marking including, loading, unloading, freight, stacking and transit insurance charges etc., complete (TWAD SR 2024-25, P.No.11

Supply and delivery of un plasticised 150 mm dia PVC End Cap suitable for 165mm OD pvc pipes casing pipes of 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS 12818/92 and as amended from time to time to suit the borewell upto 80m depth with ISI marking including, loading, unloading, freight, stacking and transit insurance charges etc., complete (TWAD SR 2024-25, P.No202

Labour Charges for inserting PVC Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the executive engineers of T (TWAD SR 2024-2025 page no.201

Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by 'V' notch method.page no.317 tward board 23-24

Supply & delivery of Single phase panel board with two level guard with auto start for 1HP single phase submersible pumpset including cost and conveyance of material etc., complete as per standard specification TWAD Board 24-25 pg no.119

Supply & delivery of 1 HP Single Phase submersible pumpset Duty 20 lpm x 90 m head, including cost and conveyance of material etc., complete as per standard specification. (twad 2024-25 rate page no.102)

Labour Charges for erection of Submasible(Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities (a).Upto 5 HP TWARD 24-25 (PAGE.204)

Supply & delivery of 50mm HDPE Pipe (medium) as per IS 1239/PART I /90 including cost and conveyance of material etc., HOSE PIPE complete as per standard specification page no.22 tward board 23-24

Supply and delivery of PVC insulated and sheathed 3 core 2.5 sqmm flate type copper cable confirming to IS 694/1990 including cost and conveyance of material etc complete as per standard specification.tward board pg.214

Supply and delivery of HDPE tank of size 1000 litres capacity bearing with ISI make providing 3 Nos. of 20mm tap connections with check nut washers nipple arrangments and 1 No. of 25mm for scour and 32mm for over flow arrangemetns etc., complete tward board pg.no.92

Contruction of Birck Wrok Pedestal using contry bricks in 1.5 of size 1.3m dia, 0.60 m height with plat form 2.50m outer dia ot a depth of 0.30m heigh with PCC 1:4:8 using 40mm HBG ISS metal etc., complete.civil data pg 04

Providing kisok of size 75 x 75 x 45 cm made up to MS sheet of 19 guage and MS angle of size 50 x 50 x 3 mm and MS flats 25 x 3 mm for doors withlocking arrangements and fixing over the pedestal of 0.45 x 0.75 x 1.2 m using country bricks etc., complete PG NO.92

Supply, delivery and fixing the following specials in GI and PVC including cost and conveyance of all materials and labour charges fixing in position of specials etc.,complete tward board pg.no.218 a) Bore cover

b) Borepit

c) 2" GI Coupling-50mm PG NO.32(2024-25)

d) 2" Flang set-50mm (2024-25)PG NO.45

e) 2" MS clamp -50mmPG NO.32(2024-25)

f) 2" GI Pipe nipple 9" Long-50mmPG NO.32(2024-25)

g) 2" GM Gate valve-50mm PG NO.32(2024-25)

h) 2" GM Non return Valve-50mmPG NO.32(2024-25)

i) 7/16 - Copper wire-50mm

j) GI wire