Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.6 LAccepted-AOC R O WARD NO 03 KATHUA DISTRICT KATHUA | 1 | Accepted-AOC 1 | |
| 2 | 2₹1.9 L+₹30,878 (19.4%)Rejected-AOC R O WARD NO 03 KATHUA DISTRICT KATHUA | 2 | Rejected-AOC 2 | |
| 3 | 3₹2.0 L+₹44,832 (28.2%)Rejected-AOC VILL DUMAL P O PANJAHRA TEHSIL NURPUR DISTT KANGRA HP | MANDI | HIMACHAL PRADESH | 175013 | 3 | Rejected-AOC 3 | |
| 4 | Rejected-Technical NA | - | Rejected-Technical Documents are not as per NIT Requirements |
Tender Value
Refer Docs
EMD Value
₹5,870
Closing Date
19 Nov 2022, 6:55 pmClosed
Executive Engineer, RCC Upper Division Kathua
Executive Engineer, RCC Upper Division Kathua
Upgradation and Improvement of Lakhanpur Pump House Building including Rest House (Balance work)
2022_IFC_194649_1
e-Nit No 27/RCC Upper/RTIC Kathua 2022-23
Open Tender
Civil Works - Canal
Item Rate
30 days
Kathua
As per NIT
4 documents required · 4 mandatory
₹600
Yes
Executive Engineer, RCC Upper Division Kathua
₹5,870
6 Jan 2023
3 Nov 2022
21 Nov 2022
3 Nov 2022
19 Nov 2022
4 Nov 2022
Amount
Earthwork in excavation by manual means in tranches for foundation, drains, pipes,cables etc (not exceeding in 1.5M in width) and for shafts,bells,cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5M, including getting out excavated earth and disposal of surplus excavated earth as directed (1M from cutting edge) All kinds of soil
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering -All work up to plinth level.1:4:8(1cement:4 coarse sand:8 graded stone aggregate 40mm nominal size
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level with 1:3:6(1cement:3 coarse sand:6 graded stone aggregate 20mm nominal size
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: (a)Cement Mortar 1:6 (1 cement : 6 coarse sand)
Extra for brick work in square or rectangular pillars
Skilled & unskilled labour required for removing paint from wood work, removing old sanitary fitting including replacing and fixing new connection and repair of wood works.
Mason (for brick work) First class
Labour
Random rubble masonry with hard stone in super structure above plinth level and up to floor five level including leveling up with cement concrete 1:6:12 ( 1 cement : 6 Coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, sealing level and the like: Cement mortar 1:6 (I cement : 6 Coarse Sand )
Renewing glass panes with wooden filets wherever necessary a/Float glass panes of thickness 4.0mm (weight not less than 10Kg /Sqm)
12mm cement plaster of mix 1:4 (1cement:4coarse sand)
Painting (One or more coats) with black Japan paint of approved brand and manufactured to give an even shade.
Lettering with black Japan paint of approved brand and manufacture.
Cement Concrete Flooring 1:2:4 ( cement : 2 Coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of noising of steps…etc. complete. 40mm Thick with 20mm nominal size stone aggregate.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm.
Providing and laying ceramic glazed floor tiles 300x300 mm (thickness to be specified by manufacturers) of first quality confirming to IS:15622 of approved may , laid on 20mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment….etc., complete. In all colour, shades, except white, ivory, fume red brown.
Engagement of fitters for repairing the water supply (line of rest house)
Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes, having thermal stability for hot and cold water supply, including all Cpvc plain and brass threaded fittings. This includes jointing of pipes and fittings with one step Cpvc solvent cement and testing of joints complete as per direction of Engineer –in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00m spacing. 20mm nominal outer dia pipes.
Providing and fixing chlorinated polyvinyl chloride ( CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer –in-charge. Internal work-concealed fixing the pipe with clamps at 1.00m spacing including cutting chases and making good the wall etc. 20mm nominal outer dia pipes
Providing and fixing on wall face un-plasticized rigid PVC rain water pipes confirming to IS: 13592 Type A including jointing with seal ring confirming to IS: 5382 leaving 10mm gap for thermal expansion. Single socketed pipes 110mm diameter
Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers
Carriage of sand and stone aggregates from source to site of work avg. distance 6KM by Mechanical Transport
Carriage of bricks from source to site of work avg. distance 6KM by Mechanical Transport
Supplying and drawing following sizes of FRLS PVC insulated Copper conductor ,single core cable in the existing surface/ recessed steal /PVC conduit as required .
2 X 4 sqmm.
2 X 2.50 sqmm.
2 X 1.50 sqmm.
Supplying And fixing following modular base and cover plate on existing modular metal boxes etc. as required .
4 module.
6 module.
12 module.
Supplying And fixing following modular switch/ socket on the existing modular plate and switch box including connections work excluding modular plate etc. as required.
5/ 6A switch.
3 Pin 5/6 each socket outlet.
15/16A switch.
Supplying And fixing following modular switch/ socket on the existing modular plate and switch box including connections work excluding modular plate etc. as required. 6 Pin 15/ 16A socket outlet.
Supplying and fixing brass batten/angle holder including connection etc. as required.
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required.
Supplying and fixing call bell/buzzer suitable for single face, 230V, complete as required.
Supplying and fixing following way, single pole and neutral, street steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter-connections, powder painted including earthing etc. as required: (but without MCB/RCCB insulator ) 6 way, double door
Supplying and fixing MCB’s
6 amps. to 32 amps. ratings, TPMCB, “C” curve, 10KA breaking capacity.
6 amps. To 32 amps., SPMCB,“C” curve, 10KA breaking capacity.
6 amps. To 32 amps., DPMCB,“C” curve, 10KA breaking capacity.
Supplying and fixing modular base and cover plate on existing modular metal boxes etc. as required. 18 Module
Supplying and fixing of fans 1200mm (48 inch high speed) (brand havells, Crompton, bajaj, orient are equivalent brand) including of accessories.
Supplying and fixing of surface mounted 18/20 watt. LED batten, tube fitting 4feet long including connections etc. as required warm/white.
Supplying and fixing of round sheets.
Providing and fixing of LED bulbs (9 watts).
M/S SUBHASH SINGH GOVT CONTRACTOR
m/s tilak raj govt contractor
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .