Block Haldaur me Village Rehadwa se Gangdaspur Sikandarpur sampark marg per lepan marammat karya Lot 29

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 30 m as per Technical Specification Clause-301.5.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause-405. G-3

Providing and applying tack coat with Bitumen(VG-10) using Bituman distributor at the rate of 0.275 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause-503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by(ex.cost of) seal coat of Type- C as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type- C as per Technical Specification Clause 510

Providing and laying of Hot applied thermoplastic compound 2.50 mm thick including reflactorising glass beads @ 250 gm per Sqm area. Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be leveled uniform and free from streaks and holes.

Providing and fixing of retro reflective signs a corroision resistence 4 mm thick aluminum composite panel face to be fully converted with high intensity prismatic sheeting type 4 as per IRC 67-2010 retro reflective sheeting with MS angle frame 35x3.(Caution Boards on main roads prior to intersections)

Supply And Fixing of Ordinary Kilo Meter Stone

Supply And Fixing of Sub Kilo Meter Stone ( 200 M)