REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION WORK IN CERTAIN MD/ OTM ACCN AT ZONE-I (A) AREA UNDER GE (S) JAIPUR

Amount

Taking down carefully surface aluminum or copper point wiring with PVC casing capping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories terminated in modular sunken boxes for mounting switches, sockets, fan regulators as required as under:- (Note-1. The cost of cutting chases in stone masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring

One light point controlled by one switch.

All as per item No. 02 here-in-before but one fan point controlled by one switch.

Ditto but one light point controlled by two, two way switch.

Ditto but one socket outlet 6 amp controlled by one switch on the same board with other switches.

Ditto but one socket outlet 6 amp controlled by one switch on indepdendent board.

Ditto but one bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories terminated in modular sunken boxes for mounting switches, sockets, fan regulators as required for one socket point 16 Amp controlled by one switch. (Note-1. The cost of cutting chases in stone masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16 mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets, fan regulators for one light point controlled by one switch.

All as per item No. 4 above but one light point controlled by two, two way switch.

All as per item No. 4 above but one fan point controlled by one switch.

All as per item No. 9 above but one socket outlet 6 Amps controled by one switch on the same board with other switches.

All as per item No. 4 above but one socket outlet 6 Amps controlled by one switch on independent board.

All as per item No. 4 above but one bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 4.0 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 4.0 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets for one 16 Amps socket outlet point controlled by one switch on independent board.

S&F angle holder, insulated polycarbonate body with back plate complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F switch piano flush button single pole one way 6 Amp complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F switch piano flush button single pole one way 16 Amp complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F flush type, 6 Amp, single pole, two way complete. Make : Anchor Penta PC/Havells Reo/SSK as approved. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F bell push, flush type, 6 Amps 240 volts complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module.Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F modular socket 6 Amps, 2/3 pin combined 2 module AC 230 volts. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F modular switch 1 way 16 Amps, 230 volts, 1 module. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F switch modular 2 way 6 Amps, 230 volts, 1 module. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F modular bell push 6 Amps 1 module. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S & F modular blanking plate 1 module.

S&F modular white cover plate with frame and metal flush box 1/2 module.

S&F modular white cover plate with frame and metal flush box 3 module.

S&F modular white cover plate with frame and metal flush box 4 module.

S&F modular white cover plate with frame and metal flush box 6 module.

S&F modular white cover plate with frame and metal flush box 8 module.

S&F door bell AC 240 volts, single pole complete.

S&F in replacement switch modular 1 way 6 Amps, 230 volts, 1 module.

S&F in replacement modular socket 6 Amps, 2/3pin combined 2 module AC 230 volts.

S&F in replacement modular switch 1 way 16 Amps, 230 volts, 1 module.Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F in replacement modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts.Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F in replacement modular fan regulator 120 watts, 2-module AC 230 Volts. Make : Legrand Arteor series/Schneider Zencilo series/ Crabtree Murena series as approved.

S&F in replacement switch modular 2 way 6 Amps, 230 volts, 1 module. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F in replacement modular bell push 6 Amps 1 module. Make : Legrand Arteor series/Schneider Zencilo series/Crabtree Murena series as approved.

S&F in replacemet switch piano flush button single pole one way 6 Amp complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in replacement switch piano flush button single pole one way 16 Amp complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in replacement bed switch flush type, 6 Amp, single pole, one way complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&Fin replacement bell push, flush type, 6 Amps 240 volts complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in replacement socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in replacement socket outlet, 2-in-1, 3 pin 6 Amps flush type compete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in replacement modular white cover plate with frame and metal flush box 1/2 module.

S&F in replacement modular white cover plate with frame and metal flush box 1/2 module.

S&F in replacement modular white cover plate with frame and metal flush box 3 module.

S&F in replacement modular white cover plate with frame and metal flush box 4 module.

S&F in replacement modular white cover plate with frame and metal flush box 6 module.

S&F in replacement modular white cover plate with frame and metal flush box 8 module.

S&F ceiling rose 3 plates polycarbonate body complete.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x4Sqmm + 1x4.0 Sqmm earth wire in 20mm dia conduit including taking down.

All as per item No. 53 above but 2x6 Sqmm + 1x6 Sqmm earth in 20 mm dia conduit.

All as per item No. 53 above but 2x10 Sqmm + 1x10 Sqmm earth in 25mm dia conduit.

S&F 20 amp, single pole and neutral socket outlet with 2 pole and earthy, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for socket outlet with and including one number single pole 'C' series MCB 16 amp as required. Make- Legrand/Hager/Schneider as approved.

S&F rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of 25mm dia.

M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point and including 15mm bore light grade G.I. protection pipe (upto 7.5 mtr from edge of the pit), PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earh work including testing on completion.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 4 ways including taking down.

S&F MCB distribution board, powder coated, SPN , 240 volts, 8 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required including taking down. Make : Legrand Cat Ref No. 507612 or Schneider Cat No. A9HSND12 or Hager as approved

S&F MCB distribution board, powder coated, SPN , 240 volts, 12 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required including taking down. Make : Legrand Cat Ref No. 507612 or Schneider Cat No. A9HSND12 or Hager as approved.

S&F MCB distribution board, powder coated, SPN , 240 volts, 2 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required including taking down. Make : Legrand Cat Ref No. 507791 or Schneider or Hager as approved.

S&F MCB distribution board TPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS:8623, degree of protection IP 43-IK09 with metal door, recess mounted , having insulated 100 amp tinned copper bus bar, earth bar, din bar, detachable gland plate, interconnection , earthing connection, blanking plates in unused spaces as required including taking down.

S&F MCB distribution board, tripple pole and neutral, powder coated CRCA steel sheet, suitable for MCCB incomer upto 160 Amps, 4 way 415 volts, degree of protection IP 43, IK-09 with reversible double door, recess mounted, having 250 Amps insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required including taking down. Make : Legrand Cat Ref No. 507745 or equivalent in Hager/Schneider as approved

S&F in repair MCCB four pole, 125 Amps, 16 KA thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB for connection, required lugs as required. Make : Legrand Cat Ref No.420013 or equivalent in Schneider/Hager as approved including taking down. Make : Legrand Cat Ref No. 420016 or equivalent in Schneider /Hager as approved.

S&F louvers only for 300 mm exhaust fan of metallic body as approved including taking down.

S&F in repairs MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. Make : Legrand Cat Ref No. 508587 to 408595 or equivalent in Hager/Schneider as approved

S&F in repairs MCBs of 'C' series double pole 10 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. Make : Legrand Cat Ref No. 408631 to to 408637 or equivalent in Hager/Schneider as approved

S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Four pole 40 to 63 amp. Make : Legrand Cat Ref No. 404618 to 40408620 or equivalent in Hager/Schneider as approved

S&F in repair LED (1.2M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2500 lumens/22 watt at a minimum system efficacy of 4000 lumen per 22 watt and total power consumption not more than 40 watt including driver. It has a rated system life time of 25000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete. Philips Cat Part No : BN 021LED 25S 6500 PSU GR S1 or equivalent

S&F energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens 36 Watts having constant current electronic driver duly connected with 0.5 Sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire. Make - Philips cat ref no. RC240B LED33S- 6500 PSU OD WH or equivalent in Havells/CG as approved.

S&F in repair LED fixture 10 watt having lumen output 100 lumens per watt including connection.Philips Cat Part No : BN 021LED 25S 6500 PSU GR S1 or equivalent

S&F in repair LED bulk head fitting 9 watt IP 66 & IK 09 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 Sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per specified. Make : Philips Cat Ref No . WT 202W LED 6S PSU S2 PC or equivalent in Panasonic/Havells/CG as approved.

Supply and fixing in replacement 8 watts wall mounted LED decorative luminary with standard accessories and lamp inclduing fixing the same with existing wall. Make : Havells Cat Part No. LHJE01106499 or equivalent in Bajaj/Philips/Panasonic.

Supply and fix in replacement LED luminary 40 watts IP 66 5700K outdoor luminary with standard accessories and making connection with existing light point with 3 core 1.0 Sqmm PVC insulated multistranded copper conductor wire including fixing the same on existing Gi bracket complete. Make Philips Cat Ref No . BRP050 LED 036 CW RI MP PCSI PSU GR or equivalent in Panasonic/Bajaj/CG.

Supply and fixing in replacement GI bracket made out of 32mm dia GI medium grade pipe of length 90 Cms long bend shape and size as per site requirement including 02 Nos of MS flat 40x5mm 200mm long bend to shape as required to fix the G bracket with existing wall using 04 Nos of MS fastener 10mmx100mm long with nut, bolts and washers complete.

Supply and fix in replacement 10 watts LED T-lamp B-22 base (warm white/Golden Yellow) 100 lumens, AC 220 volts Make : Philips Part No. 9290018611 or equivalent in Panasonic/CG/Bajaj as approved.

Supply and fix in replacement PVC fresh air fan 200/250 mm sweep with louvers, fan motor and accessories complete including making connections. Make : Bajaj/Havells/CG as approved.

Supply and fixing in repairs ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required. Make : Havells Model No . ES-50 or equivalent

S&F in repairs tamper proof static single phase 2 wire direct reading energy meter (whole current) with LED display, (10-60) Amps, 240 volts AC supply, accuracy class 1.0 having an optical/RS 232 port to download the stored data by an external MRI instrument. Make : HPL Cat No : SPPB 152A111000 OC 01 or equivalent

S&F in repair recess mounted LED panel of size 220mmx220mm, 12 watts 1500 lumen output having luminous efficacy >85 lm/W, 6500K, 50Hz, p.f. >0.90, CRI80, THD <30%, 25000 burning hours including making connection. Make : Philips Cat Part No SM 260C LD 12S-6500 PSU WH or equivalent in Havells/CG/Panasonic as approved.

S&F in repair white power cotated CRCA full glow recess mounted LED bacalit panel light fitting of size 305mmx1220 mm (1' x4') 36 watt having constant current electronic driver duly connected with 0.5 Sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire. Make : C&S Cat Ref No CYGNUS-C/36W/1 x 4 W or equivalent in Havells/CG/Panasonic as approved.

S&F in replacement LED post top light 25 Watts in spherical shape polycarbonate diffuser & IP 65 including recessing mounting pipe of size not less than 32mm dia in existing PCC/brick gate post using CM in 1:4 and making connection using 3 core 0.5 Sq.mm PVC insulated cable complete. Make : Bajaj Cat Part No. BLPTSP 25W LED or equivalent in Philips/CG/Havells as approved by GE

S&F in replacement of Independent,constant current LED control Gear input voltage range: 140-270 V, suitable for 36 watt 1' x4' white power cotated CRCA full glow recess mounting LED backlite panel.Make : Philips/CG/Havells as approved by GE

S&F water heater 25 litre capacity BEE star rating 5 in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete. Make: Havells Adonia or equivalent of CG/ Vguard/ Usha/ Recold/ Venus

Supply, installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 100 Amps 415 Volts indoor type wall mounted of size not less than 750mmx650mmx250mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and comprising of the following :- Incoming : One number MCCB 125 Amps 4 pole 16 KA 415 Volts, 70-100%, 50 Hz Outgoing : (a) Single phase tamper proof meter with optical port 10 to 60 Amps-04 Nos. Make : Secure Saral or equivalent in HPL/L&T (b) MCB DP 63 Amps 'C' series 10 KA AC 240 volts-05 Nos. Make : Legrand Cat Ref No. 404618 to 40408620 or equivalent in Hager/Schneider as approved

SHREE BHAGWATI ENTERPRISES

M/s Prakash Enterprises

M/S TRADE LINKERS