SPECIAL REPAIR TO OR MD ACCN BLDG NO NP 05 (01 TO 06) AND PROVN OF HARDSTANDING FOR BASKETBALL COURT UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L 15 mm thick rendering of mortar in cement mortar 1:4 with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paid for separately.

Supply only water proofing compound.

M&L 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and directed.

S&F 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar 1:3 mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as per Srl Item No 06 here-in-before but except tiles.

M&L Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Laid on primed surface by forced application including bitumen primer complete all as specified.

M&L two coats of solar reflective bituminous aluminium paint @ 0.1 kg per sqm over APP membrane complete all as specified and directed.

Taking down cement plaster brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L Rendering/plastering on external surface of the wall of 15mm thick in cement mortar 1:4 on brick wall surfaces, surfaces finished even and fair complete all as specified and directed.

M&L for water proofing treatment to sunken floors of Kitchen, toilets, laboratories, bath and WC's etc shall be as under :- (i) Application of two components of Acrylic modified Cementitious coating (aa) Clean the RCC Surface with wire brush and chisel out and mortar sticking to Surface (ab) Apply FOSROC NITOPROOF 600 PF (min 0.8mm dft) over a priming coat of NITOPROOF WB Primer or equivalent of ASIAN PAINT/SIKA/BERGER/PIDILITE DR FIXIT (ac) Provide HDPE 1.0mm thick Sheet before laying of any floor finishes.

M&L 10mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L applying wall putty of 1mm thick interior/exterior on wall surfaces finished smooth and even complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying three coats white washing on ceiling surfaces complete all as specified and directed.

M&L Complete removal of existing treatment of wall suface and applying two coats of oil bound distemper over a coat of primer on a coat of 1mm thick wall care putty complete all as specified and as directed.

M&L Preparing new surfaces of steel of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Preparation of old steel surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of old wood or wooden based surfaces of any description not otherwise description over 10cm width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and directed.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises as complete all as specified and directed.

M&L Marble work 18 to 20 mm thick in steps ,jambs,pillars,cooking platform and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade other than white and black types over a 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

M&L non-skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 Sqm but not exceeding 0.18Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18 Sqm as in skIrting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with and including 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

S&F Glazed coloured and cereamic tiles in vertical surfaces size 450mmX 350mm & 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat & including 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches pillars etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per Srl item No 31 here-in-before but using old bricks retrieved from demolition under item 30 here-in-before including cleaning and removal of mortar from old bricks.

M&L Plain Cement Concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) min radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, incl necessary sloping on roof including formork complete all as specified and directed.

M&L form work to chajjas, including edges, complete all as specified and directed.

M&L RCC, 1: 1.5 :3, type B1 (using 20 mm graded aggregate) as in chajjas etc. complete all as specified and directed.

Taking down chowkkats or frames area not exceeding 1.5 Sqm each( Without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkkats or frames area exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

M&L Forming jambs etc built in cement mortor 1:6 to openings incl cutting toothing and properly bonding into to old work also facing, jointoing and pointing to match to existing work complete all as specified and directed.

M&L Pressed steel frames made of 1.25mm thick MS sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

M&L Pressed steel frames made of 1.25mm thick MS sheet of profile 125mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

M&L PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats complete all as specified.

S&F 35mm thick second class hard wood plain framed, panelled shutters (two panel), with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commencial veneering on both faces. The size of rail and style as per IS:1003 (Part I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat all as complete all as specified and directed.

M&L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified and directed.

S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complet to wooden/Steel window not exceeding 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass from metel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new complete all as specified and directed.

Dismantling of boarding of any description and in any position complete all as specified.

S&F 25 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessories (magnetic catcher, knobs) as in shelves/shutters with rebates fixed on PVC on three sides as in supporting block to shelves complete all as specified and directed. Make : Rajshree, Echon or equallent as approved by GE

S&F continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.

M&L Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing complete all as specified and directed.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handle complete all as specified and directed.

S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F CPVC, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 20 mm dia including taking up or down old tubing complete all as specified and directed.

S&F CPVC, medium grade, with all fitting and fixed to walls, ceilings or laid in floors 25 mm dia including taking up or down old tubing complete all as specified and directed.

S&F 20mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 25mm unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.

S&F 20mm ball brass valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed to union etc as fixed in repairs complete all as specified and directed.

S&F gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F heavy duty Stainless Steel (AISI-304) Shower drain with Cockroach Trap (450mm x 75mm) fixed with white cement fixed complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returing, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil, complete all as specified and directed.

Removing excavated material as soil exceeding 50 m and not exceeding 250 m, depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

M&L plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation filling as mass concrete complete all as specified and directed.

M&L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L PCC 1:3:6, type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and directed.

M&L Reinforced Precast cement concrete 1:2:4, type B1 (using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed. Note: Reinforcement will be measured and paid for seperately.

M&L Mild steel TMT bars 10mm dia and over,cut to length,bent to shape required,including cranking,bending,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen or laboratory with plugs washers38/40mm diaa PVCwaste pipe and including 38/40mm dia CP waste coupling fixing cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm complete all as specified and directed.

S&F stainless steel plate rack 1.00 mm thick racks of standard qality 900mm x 750mm x 250mm size in repair including necessary shelves etc complete as fixed repairscomplete all as specified and directed.

S&F Wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F CP Soapdish Oval /squaretype as fixed in repairs and all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F 20mm dia mild steel PVC colour powder coated curtain rod with fancy type brackets including with all fittings as fixed in repairs complete all as specified and directed.

S&F in repair 15mm bore bib tap fancy type of chromium plated cast copper alloy brass, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm bore pillar tap,fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore fancy type chromium plated Stop cock cast copper alloy screwed down, high pressure screwed both ends for iron pipe or union as fixed in repairs complete all as specified and directed.

S&F in repair chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt 190 gm) complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L providing and laying 60mm thick factory made chamfered edge coloured cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. Makes::- SITCO, POOJA CONCRETE, MOHINDRA INDUSTRIES, KB SPUN, SARAL IMPEX, RANA TILES CO, SHINO TILES, RN TILES & PAVERS, SWASTIK ALW. Note :- Sand shall be measured and paid for seperately

M&L Plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregates) 75mm thick as in sub base of floor complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

Demolition of un-reinforced cement concrete in any position complete all as specified and directed.

M&L 50 mm thick PCC, type B-1, 1:2:4 (using 20mm graded aggregate) as in flooring in , surface finished even and smooth without using extra cement complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm & 25mm thick, set, jointed and pointed in neat cement slurry in floors as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles ccomplete all as specified and directed.

Dismantling of steel work including doors ,gates but excluding framed truss etc complete all as spd and directed

S&F mild steel Fe 410 -W(Gde E-250 quality Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Framed work such as grills grating etc with ends of bars shoulders ans or riveted, or forged in to spikes: framed guard bars barred iron doors ladders framed balusters walk way railing framework of water cooler stand , angle iron in stair steps, iron gate and similar work conforming to fe 290.Gde E-165 complete all as specified and directed.

S&F 1.00 mm thick mild steel ,plain sheet in gates and similar work cut to size ,holes punched including round headed screws clout nails or revits and fixed to steel framing with plain 40 mm lap joints with rivited or welded incl bending or turning up etc complete all as specified and directed.

Dismantling plain or corrugated AC sheet/fibre sheet on roof covering complete all as specified and directed.

S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

Surface excavation in soft /loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

M&L plain cement concrete(1:2:4, type B2 (using 40mm graded stone aggregate) as in filling post holecomplete all as specified and directed.

S&F Mild steel (MS pipe mm dia as in post including cutting drilling bolting/rivting etc and similar work conforming to FE 290 Gde E 165 complete all as specified and directed.

S&F Mild steel screw bolt (machine made) with hexagonal or square head at one end & screwed the other end and fitting with washers and one hexagonal or square nut, length of bolt exceeding 5cm and n.exe 10cm long and 12-20 mm dia bol tcomplete all as specified and directed.

S&F 20mm thick acrylic sheet board of standard size of basket ball fixed to MS frame work vertically with MS bolt and nut on pole including 10mm dia MS ring in hanging from with acrylic sheet all as directed by engr in chrage supplied & fixed with nail/bolt complete all as specified and directed.

M&L Hardcore of broken bricks of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed.

M&L plain cement concrete 1:5:10, type E-2 (using 40mm graded stone aggregate) as in foundation filling as mass concrete of post complete all as specified and directed.

M&L acrylic flooring colour painting Red/Green/Blue for basket ball court of 02 coats over finished surface complete all as specified and directed.

M&L25 mm thick PCC 1:2:4, type B-0, (using 12.5mm graded stone aggregate) as in floor finished even and smooth with using extra cement complete all as specified.

M&L Making line with road marking paint straight or curved all as directed for marking basket ball court as per standard dimension of basket ball court complete all as specified and directed.

Supply only 3 mm thick glass dividing strip of 28 mm width complete all as specified and directed.

M&L forming expansion joint 12mm thick and gap filled with pre bituminous filler and top 30mm primed and sealed with sealing compound, Gde 'A' ,in 100mm thick concrete slab complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLSH cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Srl Item No 132 here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S&F Switch piano flush type single pole one way 5/6 Amp complete all as specified and directed.

S&F Switch piano flush type 15 amps, single pole one way duly ISI marked complete all as specified and directed.

S&F Socket outlet 2 in one , 5/6 Amps flush type ISI marked complete all as specified and directed.

S&F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and directed.

S&F ceiling rose, PVC/Polycarbonate,isolated three terminals complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulbcomplete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

S&F in repair stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Makes: Cat Part No LHEXBLP7UN1W018 of make "Havells" or techno-commercially equivalent in approved makes.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

M&L sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

S&F MCCB 63 Amps, 415 volts, 16 KA, 4 Pole complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F MCB, Single Pole and neutral 240 V, 32 Amps 10 KA 'B' series complete all as specified and directed.

S&F Sheet Metal Enclosures with Socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia complete all as specified and directed. Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run.

S&F in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note: Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 2 core complete all as specified and directed.

Removing excavated material as soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as directed.

M&L bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry width wise acrose the line of cable in trenches for protection of underground cable complete all as specified and directed.

S&F mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as requiredcomplete all as specified and directed.

M&L earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm & 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and directed.

M/S CHAWLA CONSTRUCTION COMPANY (BID ID -3487740)

RAKESH KUMAR SATISH KUMAR (BID ID -3487479)

M/s Surjit Singh and bros (BID ID -3487921)

M/s Sarup Singh (BID ID -3487624)

JAWAHAR CONSTRUCTION COMPANY (BID ID -3487431)

M/s Syal Construction Co. (BID ID -3487698)

M/s Shri Krishna Enterprises (BID ID -3487614)